1. Įvadas
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the Eltako WSZ15DE-32A Digital AC Current Meter. Please read this manual thoroughly before using the device and retain it for future reference.
2. Saugos informacija
ĮSPĖJIMAS: Elektros smūgio pavojus. Montavimą ir techninę priežiūrą turėtų atlikti tik kvalifikuoti darbuotojai.
- Prieš montuodami arba atlikdami techninę priežiūrą, visada atjunkite maitinimą.
- Ensure all connections are secure and correctly wired according to the diagram.
- Nenaudokite įrenginio, jei jis pažeistas.
- Laikykitės visų vietinių ir nacionalinių elektros kodeksų.
- Įrenginys skirtas naudoti patalpose sausoje aplinkoje.
3. Produktas baigtasview
The Eltako WSZ15DE-32A is a single-phase digital AC current meter designed for measuring energy consumption. It features a clear LCD display and S0 output for pulse counting.
3.1 pav.: priekis view of the Eltako WSZ15DE-32A meter. This image displays the front of the meter, showing the model number WSZ15DE-32A, the Eltako brand logo, and the technical specifications printed on the label, including wiring instructions for Phase IN/OUT, Neutral, and S0 output terminals. The LCD display is visible, showing a reading of '00000.00'.
Pagrindinės funkcijos:
- Single-phase energy meter, Class B
- Rated current: 0.25-5(32)A
- ttage: 230V 50Hz
- Darbinė temperatūra: -25°C iki +55°C
- LCD display for energy readings
- S0 output: 1000 Imp/kWh (LCD), 2000 Imp/kWh (S0 output)
- DIN bėgelio montavimas
4. Sąranka ir diegimas
The Eltako WSZ15DE-32A is designed for DIN rail mounting. Follow these steps for proper installation:
- Montavimas: Securely attach the meter to a standard DIN rail in an electrical distribution box. The meter features clips on the back for easy installation.
- Laidai: Refer to the wiring diagram on the device label for correct connections.
- Connect the incoming phase (L) to the 'IN' terminal.
- Connect the outgoing phase (L) to the 'OUT' terminal.
- Connect the incoming neutral (N) to the 'N' terminal.
- Connect the outgoing neutral (N) to the 'N' terminal.
- For S0 pulse output, connect S0+ and S0- terminals to a compatible pulse counter or data logger.
- Patvirtinimas: After wiring, double-check all connections for tightness and correctness before restoring power.
4.1 pav.: šonas view showing DIN rail mounting clips. This image shows the side and back of the Eltako WSZ15DE-32A meter, highlighting the integrated clips designed for secure attachment to a standard DIN rail.
Figure 4.2: Close-up of wiring diagram and display. This detailed image focuses on the wiring terminals and the LCD display of the Eltako WSZ15DE-32A meter. The diagram clearly illustrates connections for Phase (IN/OUT), Neutral (N), and S0 output (S0+/S0-), along with the energy reading on the LCD.
5. Naudojimo instrukcijos
Once installed and powered, the Eltako WSZ15DE-32A meter will automatically begin measuring and displaying energy consumption.
Ekrano skaitymas:
The LCD display shows the total accumulated energy consumption in kilowatt-hours (kWh). The reading is typically displayed with two decimal places.
S0 Pulse Output:
The S0 output provides electrical pulses proportional to the energy consumed. This can be connected to external systems for remote monitoring or data logging. The pulse rate is 1000 Imp/kWh for the LCD and 2000 Imp/kWh for the S0 output.
6. Priežiūra
The Eltako WSZ15DE-32A is a low-maintenance device. Follow these guidelines:
- Valymas: Matuoklio išorę valykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Patikra: Periodically inspect the wiring connections for any signs of loosening or damage.
- Aplinka: Užtikrinkite, kad darbo aplinka išliktų nurodytose temperatūros ir drėgmės ribose.
7. Problemų sprendimas
If you encounter issues with your Eltako WSZ15DE-32A meter, consider the following:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Ekranas tuščias | Nėra maitinimo šaltinio; neteisingas laidų išvedžiojimas. | Check power supply to the circuit. Verify wiring connections according to the diagram. |
| Meter not counting energy | Incorrect wiring; no load connected. | Ensure phase and neutral connections are correct and a load is drawing current. |
| S0 output not working | Incorrect S0 wiring; incompatible external device. | Verify S0+ and S0- connections. Consult the manual for the external pulse counter. |
If the problem persists, contact qualified technical support.
8. Specifikacijos
Detailed technical specifications for the Eltako WSZ15DE-32A Digital AC Current Meter:
| Parametras | Vertė |
|---|---|
| Modelio numeris | WSZ15DE-32A |
| Tipas | Vienfazis energijos skaitiklis |
| Tikslumo klasė | B klasė |
| Įvertintas ttage | 230 voltų |
| Dažnis | 50 Hz |
| Nominali srovė | 0.25-5(32) A |
| Didžiausia srovė | 32 A |
| S0 Output Pulse Rate (LCD) | 1000 Imp/kWh |
| S0 Output Pulse Rate (S0) | 2000 Imp/kWh |
| Darbinė temperatūra | -25°C iki +55°C |
| Montavimo tipas | DIN bėgis |
| Matmenys (I x P x A) | 6.4 x 1.8 x 8.2 cm |
| Svoris | 80 gramų |
| Sertifikatai | CE |
Figure 8.1: Dimensions of the Eltako WSZ15DE-32A meter. This image illustrates the approximate dimensions of the meter, indicating a width of 2.5 inches (6 cm), which is relevant for installation planning.
9. Garantija ir palaikymas
Eltako products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Eltako websvetainėje arba susisiekite su vietiniu platintoju.
Spare parts availability: 1 Year (as per product specifications).
