Shinko R525 Cheater Rear Tire (110/90-19 62M)

Shinko R525 Cheater Rear Tire User Manual

Model: Shinko R525 Cheater Rear Tire (110/90-19 62M)

Prekės ženklas: Shinko

1. Produktas baigtasview

The Shinko R525 Cheater Rear Tire is a specialized off-road motorcycle tire designed for extreme single track and hard enduro conditions. It combines the soft, sticky rubber compound found in trials tires with a knobby tread pattern, offering superior traction across a wider range of soil conditions compared to traditional trials tires. This hybrid design aims to improve braking performance and traction in loose soil, making it an ideal choice for challenging off-road environments.

The R525 model excels in looser, loamier soil conditions, providing enhanced confidence for riders navigating demanding terrain.

Shinko R525 Cheater Rear Tire, side view

1.1 pav.: šonas view of the Shinko R525 Cheater Rear Tire, showcasing its aggressive knobby tread pattern.

2. Diegimas ir sąranka

Proper installation of the Shinko R525 Cheater Rear Tire is critical for safety and performance. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and safety procedures.

2.1 Saugos priemonės

2.2 Mounting Instructions (General Guidelines)

  1. Nuimkite seną padangą: Deflate the old tire, break the beads, and carefully remove it from the rim.
  2. Apžiūrėkite ratlankį: Thoroughly inspect the rim for any damage, cracks, or sharp edges. Clean the rim thoroughly.
  3. Sutepkite: Apply a generous amount of tire mounting lubricant to both beads of the new Shinko R525 tire and the rim flanges.
  4. Position Tire: Place one bead of the tire over the rim. For the second bead, use tire irons carefully, taking small bites to avoid pinching the inner tube (if applicable) or damaging the tire bead or rim.
  5. Vidinio vamzdžio montavimas (jei taikoma): If using an inner tube, slightly inflate it before inserting it into the tire to prevent pinching.
  6. Pripūsti padangą: Slowly inflate the tire, ensuring both beads seat properly on the rim. Listen for two distinct "pops" as the beads seat. Do not exceed the maximum seating pressure indicated on the tire sidewall.
  7. Check Bead Seating: Visually inspect the tire around the entire circumference on both sides to ensure the beads are evenly seated. There should be a uniform line visible just above the rim flange.
  8. Sureguliuokite slėgį: Once seated, adjust the tire pressure to the recommended operating pressure for your specific riding conditions and motorcycle.
Close-up of Shinko R525 Cheater Rear Tire tread

2.1 pav. Iš arti view of the Shinko R525 Cheater Rear Tire's aggressive tread blocks, designed for maximum grip.

3. Operating Conditions and Performance

The Shinko R525 Cheater Rear Tire is engineered for optimal performance in specific off-road conditions. Understanding its design intent will help maximize its benefits.

3.1 Naudojimas pagal paskirtį

3.2 Veiklos charakteristikos

Iš viršaus į apačią view of Shinko R525 Cheater Rear Tire tread pattern

3.1 pav.: Iš ​​viršaus į apačią view highlighting the unique tread pattern of the Shinko R525 Cheater Rear Tire, optimized for off-road grip.

4. Priežiūra

Regular maintenance extends the life of your Shinko R525 Cheater Rear Tire and ensures consistent performance.

4.1 Padangų slėgis

4.2 Patikra

4.3 Valymas ir laikymas

Full top-down view of Shinko R525 Cheater Rear Tire

Figure 4.1: Full top-down view of the Shinko R525 Cheater Rear Tire, showing the complete tread pattern from bead to bead.

5. Problemų sprendimas

This section addresses common issues you might encounter with your Shinko R525 Cheater Rear Tire.

problemaGalima priežastisSprendimas
Loss of Traction / Poor GripIncorrect tire pressure (too high or too low), worn tread, unsuitable terrain for tire type, suspension issues.Adjust tire pressure to recommended levels for terrain. Inspect tread wear. Ensure tire is suitable for conditions. Check motorcycle suspension.
Netolygus protektoriaus nusidėvėjimasImproper tire pressure, unbalanced wheel, worn suspension components, aggressive riding style.Maintain correct tire pressure. Have wheel balanced. Inspect and service suspension. Adjust riding style.
Dažni pradūrimaiLow tire pressure, sharp objects in riding area, old or damaged inner tube (if applicable), rim strip issues.Maintain proper tire pressure. Avoid riding over sharp debris. Replace inner tube if damaged. Inspect and replace rim strip. Consider heavy-duty tubes or tubeless conversion if applicable.
Tire Wobble / VibrationImproperly seated bead, unbalanced wheel, damaged tire, bent rim.Re-seat tire bead. Have wheel balanced. Inspect tire for damage. Check rim for trueness. Seek professional assistance if issue persists.

6. Specifikacijos

Key technical specifications for the Shinko R525 Cheater Rear Tire (110/90-19 62M):

AtributasVertė
Prekės ženklasShinko
ModelisR525 Cheater Rear Tire
Padangos dydis110/90-19
Apkrovos įvertinimas62 (Equivalent to 584 lbs / 265 kg)
Greičio įvertinimasM (Up to 81 mph / 130 km/h)
Ratlankio dydis19 colių
Padangų tipasOff-road, Hybrid Hard Enduro / Extreme Single Track
TaikymasGalinis
UPC644978374246
Gamintojo dalies numeris87-4328S

7. Informacija apie garantiją

Shinko Tires typically come with a limited warranty covering manufacturing defects. Specific warranty terms and conditions may vary by region and product. For detailed warranty information, please refer to the official Shinko Tires website or contact your authorized Shinko dealer. Keep your proof of purchase for any warranty claims.

8. Pagalba klientams

For technical assistance, product inquiries, or support regarding your Shinko R525 Cheater Rear Tire, please contact Shinko Tires customer service or your local authorized dealer. You can usually find contact information on the official Shinko Tires websvetainę.

When contacting support, please have your tire's model number (R525 Cheater Rear Tire), size (110/90-19), and any relevant purchase information ready.

Susiję dokumentai - R525 Cheater Rear Tire (110/90-19 62M)

Preview „Shinko HR-706“ hibridinio įrašymo įrenginio (taškinio spausdinimo) naudojimo instrukcija
Šioje išsamioje naudojimo instrukcijoje pateikiamos išsamios „Shinko HR-706“ hibridinio įrašymo įrenginio instrukcijos. Joje pateikiama esminė informacija apie saugų naudojimą, montavimą, laidus, įrenginio nustatymus, ryšio protokolus, priežiūros procedūras, dažniausiai pasitaikančių problemų šalinimą ir technines specifikacijas, siekiant užtikrinti optimalų prietaiso veikimą ir ilgaamžiškumą.
Preview Shinko HR-700シリーズ ハイブリッド記録計:コンパクト、高視認性産業用データロガー
Shinko HR-700シリーズハイブリッド記録計の仕様、特徴、寸法。コンパクト設計、大型LED表示、IP65準拠、産業オートメーション向けの多様な入力オプションを特長としています。
Preview „Shinko SIF-600“ PLC sąsajos blokas: naudojimo instrukcija
Šioje išsamioje naudojimo instrukcijoje išsamiai aprašomas „Shinko SIF-600“ PLC sąsajos blokas, apimantis pramoninės automatikos taikymų įrengimą, sąranką, veikimą ir trikčių šalinimą. Būtinas saugiam ir efektyviam naudojimui.
Preview „Shinko ACS2“ skaitmeninio indikatoriaus valdiklio naudojimo instrukcija
Detailed instruction manual for the Shinko ACS2 Digital Indicating Controller, covering installation, wiring, operation, settings, and troubleshooting for industrial temperature control applications.
Preview Shinko QMC1 Communication Expansion Module Instruction Manual
This instruction manual provides comprehensive details on the Shinko QMC1 Communication Expansion Module, covering its installation, wiring, operation, communication protocols, and specifications for industrial control systems. Learn about its features, setup, and integration with host computers and PLCs.
Preview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
SHINKO WIL-101-TU デジタル指示濁度/SS計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およびトラブルシューティングに関する詳細情報を提供します。