Produktas baigtasview
The iOttie Easy One Touch Mini Dash & Windshield mount is a compact and simple smartphone mounting solution. It securely holds your device, allowing for safe driving. This mount is universally compatible with all smartphones.
Pagrindinės funkcijos:
- EASY ONE TOUCH LOCK RELEASE: Patented Easy One Touch mechanism allows quick one-hand open and close operation.
- UNIVERSALUS MONTAVIMAS: Holds all phone and case combinations from 2.3" - 3.5".
- STRONG SUCTION: Suction cup offers high stick strength, can be paired with separate dashboard pad for added strength.
- REGULIUOJAMAS VIEWING: Cradle rotates at the swivel Ball 360 degree for optimal viewing.
- KOMPAKTINIS DIZAINAS: Small Compact design allows to take up minimal space on your desired mounting location.
Image: The iOttie Easy One Touch Mini Dash & Windshield Car Mount with a smartphone mounted, showcasing its compact design and secure hold.
Sąrankos instrukcijos
- Connect Cradle to Ball Joint: Attach the mounting cradle to the ball joint of the suction cup arm. Ensure it is securely tightened.
- Paruoškite montavimo paviršių: Clean the desired dashboard or windshield area thoroughly. Ensure the surface is free of dust and debris.
- Remove Suction Cup Cover: Peel off the plastic protective cover from the suction cup.
- Sumontuokite įrenginį:
- For Dashboard Mounting: Place the mount on a hard dashboard surface. Push the lever down to lock the suction cup in place. (Note: For soft dashboards, an iOttie Adhesive dashboard pad, sold separately, is recommended to prevent marks).
- For Windshield Mounting: Place the mount on the windshield with the tab facing up. Push the lever down to lock the suction cup in place.
- Sureguliuoti Viewpakreipimo kampas: Turn the pivot and cradle knobs to adjust the arm and cradle for optimal viewing. Ensure the iOttie logo on the cradle faces up.
Image: Visual guide demonstrating the Easy One Touch lock and release mechanism for phone insertion and removal.
Video: Official iOttie Easy One Touch Mini Dash & Windshield Mount setup and usage guide. This video demonstrates connecting components, mounting on the dashboard and windshield, and adjusting the viewing kampas.
Naudojimo instrukcijos
- Išmaniojo telefono tvirtinimas:
- Press the release bars on the sides of the cradle to open the locking side arms.
- Place your smartphone against the Easy One Touch Trigger button located in the center of the cradle. The arms will automatically close and secure your device.
- Išmaniojo telefono atjungimas:
- Press the release bars on the sides of the cradle to unlock the side arms.
- Gently remove your smartphone from the mount.
- Reguliavimas Viewing Angle During Use: The cradle rotates 360 degrees at the swivel ball joint. Loosen the pivot knob to adjust the angle, then tighten to secure.
Image: Illustration of the mount's optimal viewing angles, demonstrating its 225-degree pivot capability.
Priežiūra
- Siurbimo taurės valymas: If the suction cup loses its stickiness, rinse it with warm water and let it air dry completely. This will restore its adhesive properties.
- Cleaning the Mount: Nuvalykite laikiklį minkšta,amp šluoste dulkėms ir nešvarumams pašalinti. Venkite naudoti stiprias chemines medžiagas ar abrazyvinius valiklius.
- Saugykla: Kai ilgesnį laiką nenaudojate laikiklio, laikykite jį vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Mount not sticking to dashboard/windshield. | Dirty surface; suction cup lost stickiness; unsuitable surface material. | Clean surface thoroughly. Rinse suction cup with water and air dry. For soft dashboards, use an adhesive dashboard pad (sold separately). Ensure surface temperature is above 40°F before installation. |
| Phone not held securely. | Side arms not fully closed; phone too large/small for universal compatibility. | Ensure phone is pressed firmly against the Easy One Touch Trigger. Verify phone width is within 2.3" - 3.5". |
| Mount wobbles or moves during driving. | Suction cup not properly locked; pivot/cradle knobs loose. | Ensure suction cup lever is fully pushed down. Tighten all pivot and cradle knobs securely. |
Specifikacijos
- Gaminio matmenys: 4.33 x 2.76 x 5.51 colio
- Prekės svoris: 8.4 uncijos
- Modelio numeris: HLCRIO128
- Spalva: Juoda
- Montavimo tipas: Dashboard / Windshield
- Suderinami įrenginiai: Smartphones (2.3" - 3.5" width)
- Gamintojas: iOttie
- Kilmės šalis: Korėja, Respublika
- Pirmą kartą pasiekiama data: 23 m. kovo 2018 d
Garantija ir palaikymas
For detailed warranty information and customer support, please refer to the official iOttie websvetainėje arba prie gaminio pridėtame naudotojo vadove.
Skaitmeninę naudotojo vadovo versiją galite rasti čia.
Teisinis atsisakymas: Before installation, we recommend that both surface area and the product itself have a temperature above 40F. In addition, please let the dashboard pad sit for 30 minutes, before installing. PLEASE NOTE: If you have a leather dashboard please mount on your windshield for a stronger hold. iOttie is not responsible for misuse or damage to location of mounting.
