Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the Amcrest AMCPFA130-E Waterproof Junction Box. This junction box is designed to protect and conceal wiring and connectors for compatible Amcrest bullet and dome cameras, ensuring a clean and secure installation, particularly in outdoor or exposed environments.
Sąranka ir diegimas
The Amcrest AMCPFA130-E junction box is constructed from durable aluminum and SECC materials, providing robust protection for camera connections. It is designed for surface mounting and offers rear/bottom access for cable routing.
Pakuotės turinys:
- Amcrest AMCPFA130-E Junction Box
- Tvirtinimo varžtai ir sieniniai inkarai
- Allen Wrench (for opening the box)
Diegimo žingsniai:
- Paruošimas: Ensure the installation surface is clean and stable. Identify the desired mounting location, considering cable routing and camera field of view.
- Gręžimo skylių žymėjimas: Place the junction box against the mounting surface and mark the positions for the three mounting holes.
- Gręžimas: Drill pilot holes at the marked positions. If mounting on masonry or concrete, insert the provided wall anchors.
- Dėžutės montavimas: Secure the junction box to the surface using the provided mounting screws. Ensure it is firmly attached.
- Kabelių valdymas: Route the camera's cables through the rear or bottom access points of the junction box. Connect the necessary power and data cables.
- Kameros priedas: Attach your compatible Amcrest camera to the front plate of the junction box using the camera's mounting screws. Ensure all connections are secure and waterproof.
- Sandarinimas: For outdoor installations, apply a weather-resistant sealant around the edges of the junction box where it meets the mounting surface to prevent water ingress.

This image displays the Amcrest AMCPFA130-E Waterproof Junction Box, highlighting its key dimensions. The box has a diameter of 4.87 inches and a height of 1.62 inches, providing space for cable management and connections.
Šis vaizdo įrašas suteikia pabaigąview of Amcrest's commitment to simple, reliable, and secure surveillance solutions, demonstrating how their products, including accessories like junction boxes, contribute to comprehensive home and business security.
Operacija
The Amcrest AMCPFA130-E Waterproof Junction Box is a passive component designed to house and protect the electrical connections and excess cabling of your security camera. Once installed, its primary function is to provide a secure, weather-resistant enclosure, ensuring the longevity and reliable operation of your camera's wiring.
Priežiūra
To ensure optimal performance and longevity of your junction box and camera system, periodic maintenance is recommended:
- Vizuali apžiūra: Regularly check the exterior of the junction box for any signs of damage, cracks, or loose components.
- Sandarinimo vientisumas: Inspect the sealant around the box and mounting surface for any deterioration. Reapply sealant if necessary to maintain waterproof integrity.
- Valymas: Dėžutės išorę nuvalykite minkšta,amp cloth to remove dirt, dust, or debris. Avoid using harsh chemicals that could damage the finish.
- Tvirtinimo detalių patikrinimas: Periodically verify that all mounting screws are tight and secure.
Trikčių šalinimas
Most issues related to the junction box are installation-dependent. If you experience problems with your camera system after installing the junction box, consider the following:
- Camera Not Functioning: Verify that all cable connections inside the junction box are secure and correctly wired. Ensure power is supplied to the camera.
- Vandens patekimas: If moisture is found inside the box, immediately disconnect power to the camera. Inspect all seals and cable entry points for damage or improper sealing. Re-seal as needed.
- Laisvas tvirtinimas: If the junction box feels loose, tighten the mounting screws. If the wall anchors are compromised, consider relocating or using stronger anchors.
For camera-specific issues, refer to your camera's instruction manual or contact Amcrest support.
Specifikacijos
| Modelio numeris | AMCPFA130-E |
| Medžiaga | Aluminum & SECC |
| Spalva | Baltas |
| Stilius | Kompaktiškas |
| Apdailos tipas | Dengtas milteliniu būdu |
| Diegimo tipas | Sumontuotas |
| Prekės svoris | 0.4 kilogramo (14 uncijos) |
| Pakuotės matmenys | 5.75 x 5.71 x 2.56 colio |
| UPC | 851352008516 |
Garantija ir palaikymas
Amcrest products come with a 1-YEAR US WARRANTY ir LIFETIME SUPPORT, provided directly by Amcrest. For technical assistance, warranty claims, or further information, please visit the official Amcrest websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba.





