1. Produktas baigtasview
The EPEVER Tracer4210AN-G3 is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This model supports both 12V and 24V battery systems automatically and is compatible with various battery types, including lead-acid and lithium-ion.
This package includes the Tracer4210AN-G3 controller, an MT52 remote meter for monitoring and parameter setting, and a temperature sensor cable (RTS300R47K3.81A) for accurate temperature compensation.
2. Pagrindinės savybės
- Itin greitas stebėjimo greitis ir garantuotas stebėjimo efektyvumas.
- Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time.
- Compatible with lead-acid (Sealed, Gel, Flooded, User) and lithium-ion (LiFePO4, Li(NiCoMn)O2, User) batteries.
- Įprasta neigiamo įžeminimo konstrukcija.
- Rated charge current: 40A.
- Max. PV input power: 520W (12V battery) / 1040W (24V battery).
- Maks. PV atviros grandinės ttage: 100VDC.
- Automatinis 12 V / 24 V sistemos garsumo reguliavimastage pripažinimas.
- Auto-saving function with two voltage disconnect levels.
- Įkrovimo galios ir srovės ribojimo funkcija.
- Nepriklausomas ttage regulation constant voltagišvesties funkcija.
- Battery temperature compensation function (for lead-acid batteries).
- Overheating power reduction function.
- MT52 Remote Meter for real-time data display, alarm information, and diversified load control modes.
3. Pakuotės turinys
Produkto pakuotėje paprastai yra šie elementai:
- 1 x Tracer4210AN-G3 MPPT Solar Charge Controller
- 1 x Remote Meter MT52
- 1 x Temperature Sensor Cable (RTS300R47K3.81A)
- 1 x RS485 kabelis
- 2 x User Manuals (one for controller, one for MT52)
4. Montavimo instrukcijos
Always Connect the Battery First!
Please read the complete installation instructions to familiarize yourself with the installation steps before proceeding. Do not use electric screwdrivers for connections.
4.1. Laidų schema
The diagram above illustrates the typical system connection. Ensure all components are connected in the correct order to prevent damage.
4.2. Prijungimo žingsniai
- Prijunkite akumuliatorių: Pirmiausia prijunkite akumuliatorių prie įkrovimo valdiklio. Įsitikinkite, kad poliškumas yra teisingas (+ prie + ir - prie -).
- Prijungti apkrovą: Prijunkite nuolatinės srovės apkrovą prie įkrovimo valdiklio.
- Connect Solar Panel (PV Array): Connect the solar panel to the charge controller last.
4.3. Disconnection Steps
To disconnect the system, reverse the connection order:
- Disconnect Solar Panel (PV Array): Disconnect the solar panel first.
- Atjungti apkrovą: Disconnect the DC load.
- Atjunkite akumuliatorių: Disconnect the battery last.
4.4. Detailed Wiring
Ensure all wires are securely fastened in their respective terminals. The controller features terminals for Solar Panel (10mm²/8AWG), Battery (10mm²/8AWG), and Load (10mm²/8AWG).
4.5. Connecting Remote Meter (MT52)
The MT52 remote meter connects to the COM port on the charge controller using an RS485 cable. This allows for remote monitoring and parameter adjustments.
4.6. Connecting to PC for Monitoring
For advanced monitoring and parameter setting, the controller can be connected to a PC using a CC-USB-RS485-150U cable. This allows access to the EPEVER PC software for detailed system analysis.
5. Naudojimo instrukcijos
5.1. LCD ekranas viršview
The controller features an LCD display for real-time monitoring of system status and parameters. Use the 'SELECT' and 'ENTER' buttons to navigate through the menus.
5.2. Baterijos tipo nustatymas
Valdiklis palaiko įvairių tipų baterijas. Norėdami nustatyti baterijos tipą:
- Press the "ENTER" button and hold for 5 seconds under the battery voltage sąsaja.
- Press the "SELECT" button when the battery type interface is flashing to cycle through options (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
- Press the "ENTER" button to confirm the battery type.
For lithium batteries, specific series configurations are available (e.g., LiFePO4 4s/8s, Li(NiCoMn)O2 3s/6s).
5.3. Setting Load Working Mode
The MT52 remote meter allows for diversified load control modes:
- Rankinis valdymas
- Šviesa ON/OFF
- Šviesa ON + laikmatis
- Laiko kontrolė
Refer to the MT52 User Manual for detailed instructions on setting these modes.
5.4. Setting Battery Parameters (via MT50/MT52)
For advanced battery parameter settings, use the MT50/MT52 remote meter. Navigate to 'Control Para.' in the menu interface. You can adjust parameters such as Over Voltage Disconnect, Charging Limit, Equalize Charging, Boost Charging, Float Charging, Low Voltage Reconnect, and Discharge Limit. When setting parameters for 'USER' battery type, ensure the voltage parameters follow the specified logic (e.g., Over Voltage Atjunkite ttage > Įkrovimo riba Voltagir).
6. Specifikacijos
| Parametras | Vertė |
|---|---|
| Nominali įkrovimo srovė | 40A |
| Sistemos ttage | 12 V / 24 V automatinis darbas |
| Maksimali PV įėjimo galia (12 V) | 520W |
| Maksimali PV įėjimo galia (24 V) | 1040W |
| Maks. PV atviros grandinės ttage | 100VDC |
| Baterijos tūristage Diapazonas | 8 V ~ 32 V |
| Terminalo dydis | 6AWG (16 mm²) |
| Matmenys (L*P*A) | 252 x 180 x 63 mm (9.92 x 7.09 x 2.48 coliai) |
| Grynasis svoris | 1.65 kg (3.64 svaro) |
| Ekrano tipas | LCD |
| Medžiaga | Lithium (compatible) |
7. Elektroninės apsaugos
The Tracer4210AN-G3 controller includes multiple electronic protections to ensure safe operation:
- PV virš srovės / galios
- PV trumpasis jungimas
- PV atvirkštinis poliškumas
- Naktinis atvirkštinis įkrovimas
- Baterijos atvirkštinis poliškumas
- Baterija per ttage
- Baterija per daug išsikrovusi
- Akumuliatoriaus perkaitimas
- Valdiklio perkaitimas
- Ličio baterija žema temperatūra
- Apkrovos trumpasis jungimas
- Apkrovos perkrova
- TVS High Voltage Pereinamieji procesai
8. Problemų sprendimas
If you encounter issues with your EPEVER MPPT Solar Charge Controller, consider the following:
- Nėra ekrano / maitinimo: Ensure the battery is correctly connected and has sufficient voltage. Check all wiring for loose connections or incorrect polarity.
- Nėra įkrovimo: Verify solar panel connections and ensure adequate sunlight. Check PV input voltage and current on the display. Confirm battery type settings are correct.
- Įkrovimas neveikia: Check load connections and ensure the load is not overloaded or short-circuited. Verify load control mode settings on the MT52.
- Nenormalūs rodmenys: Ensure temperature sensor is correctly connected and not damaged. Check communication cables for secure connections.
For persistent issues, refer to the detailed troubleshooting section in the full user manual or contact EPEVER technical support.
9. Pagalbos informacija
For technical assistance, product inquiries, or warranty claims, please contact EPEVER's authorized sales agent, Goland Century. They offer free technical support and have service centers in various regions.
Kontaktinė informacija:
- Techninė pagalba: Available through Goland Century technicians.
- Programinės įrangos atsisiuntimas: EPEVER PC software can be downloaded from the official EPEVER websvetainę.
Please refer to the official EPEVER website or your product documentation for the most up-to-date contact details and support resources.
