Britax B-Free & B-Safe Ultra Travel System Instruction Manual

1. Svarbi saugos informacija

Read all instructions and warnings in this manual before using the Britax B-Free & B-Safe Ultra Travel System. Failure to follow these instructions could result in serious injury or death to your child.

1.1 Car Seat Safety

• The B-Safe Ultra Infant Car Seat is designed for rear-facing use only, for infants weighing 4–35 svarai (1.81–15.88 kg) ir iki 32 colio (81 cm) ūgio.
• The car seat features 2 layers of side impact protection, an impact-stabilizing steel frame, ir an impact-absorbing base didesniam saugumui.
• Always secure your child in the car seat harness system. Ensure the harness straps are snug and the chest clip is at armpit level.
• Always install the car seat or car seat base correctly in your vehicle using either the LATCH system or the vehicle's seat belt. Refer to your vehicle owner's manual for specific instructions.
• The B-Safe Ultra Infant Car Seat is FAA patvirtinta for aircraft travel when used without the base.

1.2 Stroller Safety

• The B-Free Stroller is suitable for children from birth up to 65 pounds (29.48 kg) ir iki 44 colio (111.76 cm) ūgio.
• Visada naudokite 5 taškų saugos diržų sistemą, kad pritvirtintumėte vaiką vežimėlyje.
• Įjunkite stovėjimo stabdį, kai vežimėlis nejuda.
• Do not overload the stroller's cargo basket or pockets. The XL cargo basket has a 10 lbs (4.5 kg) carrying capacity.
• Niekada nepalikite vaiko be priežiūros vežimėlyje.

2. Sąranka ir diegimas

2.1 B-Free Stroller Assembly

1. Unfold the Stroller: Release the folding latch and lift the handlebar until the stroller frame locks into place.
2. Pritvirtinkite ratus: Įkiškite priekinį ir galinį ratukus į atitinkamus griovelius, kol jie tvirtai užsifiksuos.
3. Reguliuokite vairą: Press the buttons on the side of the handlebar to adjust it to your desired height.

Image: The Britax B-Free Stroller, showing its overall dimensions and weight capacity.

Image: The adjustable handlebar feature of the Britax B-Free Stroller.

2.2 B-Safe Ultra Infant Car Seat Installation

The B-Safe Ultra Infant Car Seat can be installed with its base using LATCH connectors or a vehicle seat belt, or without the base using the European Belt Guide.

2.2.1 Installation with Base (LATCH System)

1. Place the car seat base firmly on the vehicle seat.
2. Išplėskite Premium Quick-Push LATCH Connectors nuo pagrindo.
3. Attach the LATCH connectors to your vehicle's lower anchors. Ensure they click securely.
4. Press down firmly on the base while tightening the LATCH strap until the base is secure and does not move more than one inch side-to-side or front-to-back at the belt path.
5. Naudokite Dual Auto-Level Indicators to ensure the base is at the correct recline angle. Adjust the Spring-Assisted Recline foot if necessary.
6. Once the base is secure, place the infant car seat onto the base until it clicks into place. Pull up on the car seat to confirm it is locked.

Image: Features of the Britax B-Safe Ultra Infant Car Seat base, including LATCH connectors and recline adjustment.

Image: The LATCH connectors and steel frame of the Britax B-Safe Ultra Infant Car Seat.

2.2.2 Installation without Base (European Belt Guide)

1. Place the infant car seat rear-facing on the vehicle seat.
2. Route the vehicle's lap belt through the designated belt path on the car seat.
3. Buckle the vehicle seat belt and remove all slack.
4. Route the shoulder belt around the back of the car seat and through the Europos diržų vadovas, ensuring it is snug against the vehicle seat back.
5. Check that the car seat is secure and does not move more than one inch side-to-side or front-to-back.

Image: Illustration of the European Belt Guide for car seat installation without the base.

2.3 Attaching Car Seat to Stroller

1. Ensure the stroller is fully unfolded and locked in the open position.
2. Engage the stroller's parking brake.
3. Align the infant car seat with the stroller's receiver.
4. Nuleiskite automobilinę kėdutę ant vežimėlio, kol ji tvirtai užsifiksuos.
5. Gently pull up on the car seat to confirm it is properly attached.

3. Naudojimo instrukcijos

3.1 Vežimėlio valdymas

• Sulankstoma: With one hand, locate the quick-fold strap/handle and pull it upwards. The stroller will fold compactly.
• Išskleidžiamas: Release the folding latch and lift the handlebar until the frame locks into place.
• Stovėjimo stabdys: The One-Touch Parking Brake is located near the rear wheels. Press down to engage and lift up to release.
• Atlošo reguliavimas: The stroller features Infinite Recline Positions. Adjust the recline strap at the back of the seat to find the desired angle.
• Canopy: The XL Canopy with 50+ UV Protection can be extended or retracted. It includes a Peek-a-boo Mesh Window for ventilation and viewing your child.
• Saugykla: Pasinaudokite dideliu XL Cargo Basket and additional pockets for storing essentials.

Image: Key operational features of the Britax B-Free Stroller.

Image: Stroller canopy, cargo, and recline features.

Image: Stroller with extra pockets for convenient storage.

Image: The stroller's infinite recline positions.

3.2 Car Seat Harness Adjustment

• To tighten the harness, pull the adjustment strap at the front of the car seat.
• To loosen the harness, press the harness release button and pull the shoulder straps forward.
• Ensure the shoulder straps are at or below your child's shoulders when rear-facing.

4. Priežiūra

4.1 Valymas

• Audinys: Refer to the care labels on the fabric for specific cleaning instructions. Typically, spot clean with mild soap and cold water. Air dry. Do not machine wash or tumble dry unless specified.
• Rėmas: Wipe the stroller and car seat frame with a damp šluoste ir švelniu muilu. Kruopščiai nusausinkite.
• Ratai: Periodically clean debris from the wheels and axle areas to ensure smooth operation.

4.2 Patikra

• Regularly inspect all components for wear, damage, or missing parts.
• Check that all fasteners, buckles, and straps are secure and functioning correctly.
• Do not use the product if any part is damaged or broken. Contact customer support for replacement parts.

5. Problemų sprendimas

• Vežimėlį sunku sulankstyti / išlankstyti: Ensure all locks are disengaged and the handlebar is in the correct position. Check for any obstructions in the folding mechanism.
• Automobilinė kėdutė nefiksuojasi ant pagrindo / vežimėlio: Verify that the car seat and base/stroller receivers are clear of debris. Ensure proper alignment before pushing down firmly.
• Diržus sunku reguliuoti: Check for twists in the harness straps. Ensure the harness release button is fully pressed when loosening.
• Ratai rieda nelygiai: Clean any dirt or debris from the wheel axles. Lubricate with a silicone-based spray if necessary.

If you encounter issues not covered here, please refer to the Britax websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.

6. Specifikacijos

7. Garantija ir palaikymas

For warranty information, please refer to the official Britax USA website or the documentation included with your purchase. Britax products are manufactured by Britax USA.

For customer support, replacement parts, or further assistance, please visit the Britax USA websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo skyriumi.