1. Įvadas
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
Priekyje view of the Behringer NX1000 ampgelbėtojas, šouasindėl kompaktiško dizaino ir priekinio skydelio valdiklių.
2. Kas yra dėžutėje
Išpakuodami patikrinkite, ar yra visi komponentai:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampgyvybingesnis
- Maitinimo kabelis
- Instrukcijų vadovas (šis dokumentas)
3. Pagrindinės savybės
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. Sąranka
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampgyvybingesnis:
4.1. Stovo montavimas
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
Šoninis profesionalasfile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. Garso jungtys
Prijunkite garso šaltinį (mikšerį, stiprintuvą)ampgelbėtoją ir kt.) į amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
Išsamus view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. Maitinimo prijungimas
Connect the supplied power cable to the AC inlet on the rear panel of the amplifier and then to a suitable power outlet.
4.4. Vaizdo įrašo vadovas apie sąranką
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. Valdymas Ampgyvybingesnis
5.1. Įjungimas/išjungimas
Paspauskite GALIA priekiniame skydelyje esantį jungiklį, kad įjungtumėte amplifier on or off. The GALIA LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. Garsumo valdikliai
Sureguliuokite KANALAS A ir B KANALAS gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. Režimo pasirinkimas
On the rear panel, use the REŽIMAS switch to select between STEREO, TILTAS, arba PARALELĖS operation, depending on your speaker configuration requirements.
- STEREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- Lygiagrečiai: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. Kryžminimo nustatymai
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. LED indikatoriai
Priekiniame skydelyje yra keli LED indikatoriai:
- PRO (Protect): Šviečia, jei amplifier enters protection mode due to overload, overheating, or short-circuit.
- LIMIT: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- SIGNALAS: Lights up when an audio signal is present on the respective channel.
- GALIA: Nurodo, kad ampkeltuvas įjungtas.
5.6. Produktas baigtasview Vaizdo įrašas
ir baigtaview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. Priežiūra
Siekiant užtikrinti jūsų ilgaamžiškumą ir optimalų veikimą amplifier, laikykitės šių priežiūros patarimų:
- Įrenginį valykite minkštu, sausu skudurėliu. Venkite naudoti abrazyvinius valiklius ar tirpiklius.
- Užtikrinkite tinkamą vėdinimą aplink amplifier to prevent overheating. Do not block the ventilation grilles.
- Reguliariai tikrinkite visas kabelių jungtis, ar jos tvirtai pritvirtintos ir ar nėra susidėvėjimo požymių.
7. Problemų sprendimas
If you encounter issues with your Behringer NX1000 amplifier, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
- Nėra garso išvesties:
- Check all audio input and output connections.
- Užtikrinti, amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- Iškraipytas garsas:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- Įsitikinkite, kad garsiakalbio varža atitinka ampgelbėtojo galimybes.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- Išjunkite amplifier and disconnect all speakers.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- Per didelis ventiliatoriaus triukšmas:
- Užtikrinti, amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio pavadinimas | NX1000 |
| Galia (2 omai) | 2 x 500 vatų |
| Galia (4 omai) | 2 x 300 vatų |
| Power Output (4 Ohms Bridged) | 1000 vatų |
| Svoris | 7.3 svaro / 3.3 kg |
| Amppakėlimo klasė | D klasė |
| Loudspeaker Impedance Compensation | SmartSense |
| Crossover | Built-in stereo (low-cut, high-cut, full range) |
| Maitinimo šaltinis | Ultra-efficient switch-mode |
| Gaminio matmenys | 19.02 x 9.09 x 3.7 colio |
| Ryšio technologija | Laidinis |
| Garso išvesties režimas | Stereo |
| Grandinių skaičius | 2 |
9. Garantija ir palaikymas
The Behringer NX1000 ampkeltuvas ateina su a Ribota garantija. For detailed warranty information, product support, or service inquiries, please visit the official Behringer websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba.
Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.
