Moxa EDS-208

Moxa EDS-208 8-Port Unmanaged Ethernet Switch

Vartotojo vadovas

1. Įvadas

This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.

2. Saugos informacija

  • Prieš naudodami įrenginį, atidžiai perskaitykite visas instrukcijas.
  • Užtikrinkite maitinimo šaltinio ttage is within the specified range for the device. A power supply is not included and must be purchased separately.
  • Nelaikykite prietaiso nuo drėgmės ar ekstremalių temperatūrų.
  • Montuoti ir prižiūrėti turėtų tik kvalifikuoti darbuotojai.
  • Prieš valydami ar atlikdami prietaiso techninę priežiūrą, atjunkite maitinimą.

3. Pakuotės turinys

Before installation, verify that the package contains the following items:

  • Moxa EDS-208 Unmanaged Ethernet Switch
  • Greito diegimo vadovas (jei pridėtas)
  • Garantijos kortelė (jei yra)

If any of these items are missing or damaged, please contact your sales representative for assistance.

4. Produktas baigtasview

Moxa EDS-208 8-Port Unmanaged Ethernet Switch showing front panel with RJ45 ports and power connector.

1 paveikslas: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.

4.1. Priekinio skydelio išdėstymas

  • Power Input Terminal Block: Located at the top, a green removable terminal block for connecting the DC power supply.
  • Power LED (P): Nurodo įrenginio maitinimo būseną.
  • 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
  • Nuorodos / veiklos šviesos diodai: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.

5. Sąranka

5.1. Jungiklio montavimas

The EDS-208 supports DIN-rail mounting. To mount the switch:

  1. Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
  2. Hook the top of the DIN-rail clip over the top edge of the DIN rail.
  3. Press the switch firmly against the DIN rail until the clip snaps into place.

5.2. Maitinimo prijungimas

Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage ir dabartinius reikalavimus.

  1. Įsitikinkite, kad maitinimo šaltinis išjungtas.
  2. Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
  3. Insert the terminal block firmly into its receptacle on the switch.
  4. Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.

5.3. Tinklo įrenginių prijungimas

Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.

6. Jungiklio valdymas

6.1. LED indikatoriai

The EDS-208 features several LED indicators to provide status information:

  • Power LED (P):
    • Įjungta: Jungiklis gauna maitinimą.
    • Išjungta: Jungiklis negauna maitinimo.
  • Link/Activity LEDs (per RJ45 port):
    • Įjungta: Užmegztas galiojantis tinklo ryšys.
    • Mirksi: Duomenys perduodami arba gaunami per prievadą.
    • Išjungta: Tinklo ryšys nenustatytas.

6.2. Pagrindinis funkcionalumas

The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:

  • Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
  • Automatinės derybos: Automatically determines the best speed and duplex mode for each connected device.
  • Automatinis MDI/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
  • Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.

7. Priežiūra

7.1. Valymas

To clean the switch:

  1. Disconnect power to the device.
  2. Jungiklio išorę nuvalykite minkštu, sausu skudurėliu.
  3. Nenaudokite skystų ar aerozolinių valiklių, nes jie gali pažeisti prietaisą.

7.2. Aplinkosaugos svarstymai

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.

8. Problemų sprendimas

ProblemaGalima priežastisSprendimas
No power (Power LED off)
  • Neprijungtas maitinimo šaltinis.
  • Sugedęs maitinimo šaltinis.
  • Neteisingas laidų sujungimas.
  • Connect a compatible power supply.
  • Test power supply with another device or replace.
  • Verify power wiring polarity and connection.
No link (Link LED off)
  • Cable not connected or faulty.
  • Connected device is off or faulty.
  • Incorrect cable type.
  • Ensure cable is securely connected at both ends. Replace cable if necessary.
  • Verify the connected device is powered on and functioning.
  • Use a standard Ethernet cable (Cat5e or better).
Lėtas tinklo veikimas
  • Tinklo perkrova.
  • Sugedęs laidas.
  • Device speed mismatch.
  • Check for excessive network traffic.
  • Pakeiskite eterneto kabelį.
  • Ensure connected devices are operating at optimal speeds.

9. Specifikacijos

FunkcijaSpecifikacija
ModelisEDS-208
Ethernet prievadai8 x 10/100BaseT(X) RJ45 ports
StandartaiIEEE 802.3, 802.3u, 802.3x
Duomenų perdavimo sparta100 Megabits Per Second (Max)
Maitinimo įvestisNot specified (Power Supply not Included)
Dabartinis reitingas0.07 Amps
Darbinė temperatūra-10–60 °C (14–140 °F)
Laikymo temperatūraNenurodyta
DrėgmėNenurodyta
Būsto medžiagaPlastikiniai
Matmenys (I x P x A)3.94 x 1.57 x 3.41 colio (100 x 40 x 86.6 mm)
Prekės svoris1 svaras (0.45 kg)
MontavimasDIN bėgis

10. Garantija ir palaikymas

10.1. Informacija apie garantiją

Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

10.2. Techninė pagalba

If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa websvetainė (www.moxa.com) arba per vietinį platintoją.

Susiję dokumentai - EDS-208

Preview „Moxa EDS-600“ serijos greito diegimo vadovas
Šiame dokumente pateikiamas trumpas „Moxa EDS-600“ serijos pramoninių Ethernet komutatorių diegimo vadovas. Jame aprašomas pakuotės turinys, išplėstinės tinklo funkcijos, skydelio informacija. views for different models (EDS-608, EDS-611, EDS-616, EDS-619), mounting instructions (DIN-rail and wall), wiring requirements for power, relay, and digital inputs, communication port details, DIP switch settings for Turbo Ring, LED indicators, and detailed technical specifications.
Preview Moxa Managed Switch Next Generation OS (v3.x) User Manual
Comprehensive user manual for Moxa's Managed Switch Next Generation OS (v3.x), covering installation, configuration, web interface, security, and diagnostics for models like EDS-4008 and EDS-G4014.
Preview „Moxa EDS-4009“ serijos greito diegimo vadovas
Quick installation guide for the Moxa EDS-4009 Series industrial DIN-rail EtherDevice Switches, covering package contents, default settings, panel views, mounting instructions, wiring requirements, communication connections, reset button, DIP switch settings, LED indicators, and detailed specifications.
Preview Moxa EDS-405A/408A Series Quick Installation Guide
This guide provides quick installation instructions for Moxa EDS-405A and EDS-408A series EtherDevice switches. It covers product overview, package checklist, default settings, detailed panel layouts for various models, mounting instructions (DIN-Rail and wall), wiring requirements, communication port details, Turbo Ring settings, LED indicators, technical specifications, environmental limits, and regulatory approvals.
Preview Moxa EDS-G4012 Series Quick Installation Guide - Industrial Ethernet Switch Setup
Comprehensive guide for installing and setting up Moxa EDS-G4012 Series industrial Ethernet switches. Learn about package contents, default settings, mounting options (DIN-rail, wall), wiring, communication ports, and LED indicators for reliable industrial network deployment.
Preview „Moxa EDS-205“ serijos greito diegimo vadovas
Išsamus „Moxa EDS-205“ serijos „EtherDevice™“ pramoninių Ethernet komutatorių diegimo vadovas, kuriame išsamiai aprašomas patikimų pramoninių tinklo jungčių įrengimas, laidai, skydelio išdėstymas ir specifikacijos.