NICREW N10373

NICREW ClassicLED Plus LED Aquarium Light with Timer User Manual

Model: N10373 | Brand: NICREW

Įvadas

Thank you for choosing the NICREW ClassicLED Plus LED Aquarium Light with Timer. This manual provides essential information for the safe and efficient operation of your new aquarium light. Please read these instructions thoroughly before installation and use, and retain them for future reference.

The NICREW ClassicLED Plus is designed to provide full-spectrum lighting for your aquarium, featuring 6500K white, 450nm blue, TRUE 660nm deep red, and green LEDs. It includes an integrated timer for automated daylight and moonlight cycles, with adjustable ramp-up and dim-down functions to simulate natural sunrise and sunset. The light is suitable for freshwater or saltwater fish and low-to-medium light level plants, and is designed for aquariums measuring 30 to 36 inches.

Saugos instrukcijos

  • Elektros sauga: Always unplug the light from the power outlet before performing any maintenance or handling the unit. Ensure your hands are dry when plugging or unplugging the power adapter.
  • Vandens kontaktas: This light is NE atsparus vandeniui. Do not immerse the light unit or the power adapter in water. Avoid splashing water directly onto the light fixture. If the light falls into water, unplug it immediately before attempting to retrieve it.
  • Tinkamas išdėstymas: Ensure the light is securely mounted on your aquarium. Do not operate the light if it is damaged or has a frayed cord.
  • Vėdinimas: The aluminum alloy shell aids in heat dissipation. Ensure adequate ventilation around the light fixture to prevent overheating.
  • Numatytas naudojimas: This product is designed for indoor aquarium use only. Do not use it for purposes other than its intended use.
  • Vaikai ir augintiniai: Laikyti vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.

Pakuotės turinys

  • NICREW ClassicLED Plus Aquarium Light Unit
  • Adjustable Mounting Brackets (2x)
  • Power Adapter with Integrated Timer Controller
  • Vartotojo vadovas

Sąranka

1. Išpakavimas ir patikrinimas

Carefully remove all components from the packaging. Inspect the light unit and all accessories for any signs of damage. If any damage is found, do not proceed with installation and contact customer support.

2. Šviesos montavimas

  1. Attach the adjustable mounting brackets to both ends of the light fixture. The brackets slide into the slots on the light unit.
  2. Extend the brackets to fit the length of your aquarium. The light is designed for tanks between 30 to 36 inches.
  3. Place the light fixture securely on the rim of your aquarium. Ensure the light is stable and centered over the tank.
NICREW ClassicLED Plus light with adjustable mounting brackets extended over an aquarium.

Image: NICREW ClassicLED Plus light with adjustable mounting brackets extended, showing how it fits over an aquarium.

Diagram showing dimensions of NICREW ClassicLED Plus light for various tank sizes.

Image: A diagram illustrating the dimensions of the light unit and its compatibility with different aquarium sizes, including the 30-36 inch model.

3. Maitinimo prijungimas

Connect the power adapter to the light unit and then plug the adapter into a suitable power outlet. The integrated timer controller will display '00:00' and flash, indicating it's ready for time setting.

Naudojimo instrukcijos

Timer Controller Overview

Close-up of the NICREW ClassicLED Plus timer controller with buttons labeled.

Image: The timer controller showing its display and buttons for Hour, Minute, Settings (Gear icon), and Power.

The timer controller allows you to set the current time, program on/off times for two lighting channels, adjust brightness, and select ramp-up/dim-down durations.

Dabartinio laiko nustatymas

  1. When the display shows '00:00' and is flashing, press the 'Set' button (gear icon). The hour digits will start flashing.
  2. Use the 'Hour' button (+) to adjust the current hour. The clock operates on a 24-hour format (e.g., 13:00 for 1 PM).
  3. Press 'Set' again. The minute digits will start flashing.
  4. Use the 'Minute' button (-) to adjust the current minute.
  5. Press 'Set' one more time to confirm the current time. The display will stop flashing.
NICREW ClassicLED Plus timer controller displaying the current time, 09:30.

Image: The timer controller displaying '09:30', indicating the current time has been set.

Programming Lighting Channels (CH1 & CH2)

The light features two independent channels:

  • CH1: White, Red, and Green LEDs (Full Spectrum)
  • CH2: Blue LEDs (Moonlight)
Diagram showing independent dual-channel control for NICREW ClassicLED Plus. CH1 for White, Red, Green LEDs and CH2 for Blue LEDs, with brightness levels.

Image: A visual representation of the independent dual-channel control, showing CH1 (White, Red, Green LEDs) and CH2 (Blue LEDs) with different brightness percentages.

Setting CH1 (White, Red, Green LEDs)

  1. From the current time display, press the 'Mode' button. The display will show '00:00' (CH1 ON time) and flash.
  2. Use 'Hour' and 'Minute' buttons to set the desired ON time for CH1.
  3. Press 'Mode' again. The display will show '00:00' (CH1 OFF time) and flash.
  4. Use 'Hour' and 'Minute' buttons to set the desired OFF time for CH1.
  5. Press 'Mode' again. The display will show '100' (CH1 brightness percentage) and flash.
  6. Use 'Hour' and 'Minute' buttons to adjust the brightness from 0% to 100%.
  7. Press 'Mode' again. The display will show '15' or '30' (ramp-up/dim-down duration in minutes) and flash.
  8. Use 'Hour' and 'Minute' buttons to select 15 or 30 minutes for the sunrise/sunset simulation.

Setting CH2 (Blue LEDs)

  1. After setting CH1's ramp-up/dim-down, press 'Mode' again. The display will show '00:00' (CH2 ON time) and flash.
  2. Repeat steps 2-8 from the CH1 programming section to set the ON time, OFF time, brightness, and ramp-up/dim-down duration for CH2.
  3. After setting CH2's ramp-up/dim-down, press 'Mode' one last time to save all settings and return to the current time display.

Video: Official NICREW guide on how to program the timer for the ClassicLED Plus aquarium light.

Rankinis režimas

To manually turn the light on or off, press the 'Power' button. In manual mode, the brightness is fixed at 100% and spectrum adjustment is not available. The timer functions will be temporarily overridden until the next programmed cycle begins or the light is returned to automatic mode.

Priežiūra

  • Valymas: Regularly wipe the light fixture with a soft, dry cloth to remove dust and water spots. Do not use abrasive cleaners or solvents. Ensure the light is unplugged before cleaning.
  • Šviesos diodų ilgaamžiškumas: The LEDs are designed for long-lasting performance. Avoid touching the LEDs directly.
  • Maitinimo laidas: Periodically check the power cord for any signs of damage. If the cord is damaged, discontinue use and replace the unit.

Trikčių šalinimas

problemaGalima priežastisSprendimas
Šviesa neįsijungia.No power, loose connection, or faulty unit.Check power outlet, ensure all connections are secure. If still not working, contact customer support.
Timer settings are not working correctly.Incorrect time setting or programming error.Re-set the current time and re-program the lighting channels following the instructions in this manual. Ensure the light is not in manual mode.
Light is too bright/dim.Neteisingas ryškumo nustatymas.Sureguliuokite ryškumą procentaistage for CH1 and CH2 in the programming mode.
Ramp-up/dim-down not functioning.Ramp duration not set or light in manual mode.Ensure a 15 or 30-minute ramp duration is selected for each channel in programming mode. Confirm the light is in automatic mode.

Specifikacijos

FunkcijaSpecifikacija
Modelio numerisN10373
Vattage21 vatų
Ryškumas1150 liumenų
ttage20 voltų
Šviesos šaltinio tipasLED (6500K white, 450nm blue, TRUE 660nm deep red, green)
Kontrolės metodasIntegrated Timer Controller
MedžiagaAluminum Alloy, Acrylic, Glass
Gaminio matmenys4 "D x 36" P x 1.7" A
Prekės svoris2.42 svaro (1.1 kilogramo)
Akvariumo dydžio suderinamumas30–36 colių
Atsparumo vandeniui lygisNeatsparus vandeniui

Garantija ir palaikymas

NICREW provides a hassle-free 12 mėnesių garantija for this product from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

For technical support, warranty claims, or any questions regarding your NICREW ClassicLED Plus LED Aquarium Light, please contact NICREW Customer Service. Our team is available to provide 24-hour friendly customer service.

Kontaktinė informacija: Please refer to the contact details provided on the product packaging or the official NICREW websvetainę, kurioje rasite naujausią pagalbos informaciją.

Susiję dokumentai - N10373

Preview NICREW ClassicLED Plus akvariumo šviestuvas: naudojimo instrukcija ir sąrankos vadovas
Išsami „NICREW ClassicLED Plus“ akvariumo apšvietimo naudojimo instrukcija. Sužinokite, kaip įrengti, programuoti ir prižiūrėti akvariumo apšvietimą, kad augalai ir žuvys būtų optimalios sveikatos. Pateikiamos saugos gairės ir trikčių šalinimo instrukcijos.
Preview NICREW ClassicLED G2 LED lemputės naudojimo instrukcija
Šiame vadove pateikiamos NICREW ClassicLED G2 LED šviestuvo naudojimo instrukcijos, įskaitant saugos priemones, pakuotės turinį, greitą montavimą, valdiklio naudojimą, laikmačio funkcijas, priežiūrą ir dažniausiai užduodamus klausimus.
Preview NICREW akvariumo oro siurblio naudojimo instrukcija
NICREW akvariumo oro siurblio naudojimo instrukcija, kurioje aprašoma sauga, montavimas, priežiūra ir trikčių šalinimas.
Preview NICREW akvariumo oro siurblio naudojimo instrukcija
Oficiali NICREW akvariumo oro siurblio (modelis 01933EU2403V3) naudojimo instrukcija. Šiame vadove pateikiama išsami informacija apie saugos priemones, montavimo būdus, įprastinę priežiūrą, tinkamą utilizavimą (ES šalyse) ir garantijos informaciją. Sužinokite, kaip nustatyti ir prižiūrėti akvariumo oro siurblį, kad jis veiktų optimaliai ir tarnautų ilgai.
Preview NICREW akvariumo prisegamo šviestuvo naudojimo instrukcija
NICREW akvariumo prisegamo šviestuvo naudojimo instrukcija, kurioje aprašomos saugos priemonės, montavimas, priežiūra, informacija apie EEĮA ir garantijos detales.
Preview NICREW SkyLED Plus 2.0 akvariumo šviesos naudojimo instrukcija
Išsamus NICREW SkyLED Plus 2.0 akvariumo LED šviesos vadovas, kuriame išsamiai aprašomi programuojami apšvietimo grafikai, saulėtekio / saulėlydžio modeliavimas, spektro valdymas, saugos priemonės ir informacija apie garantiją optimaliam akvariumo augalų augimui.