Genie G1T

Genie Single Button Garage Door Opener Remote (Model G1T) Instruction Manual

Model: G1T | Brand: Genie

1. Įvadas ir pabaigaview

The Genie G1T Single Button Garage Door Opener Remote provides convenient and secure access to your garage. Designed for ease of use, this remote is compatible with all Genie Intellicode equipped openers. Its Intellicode technology enhances security by changing the access code each time the door is activated, preventing unauthorized entry. The remote also features Auto-Seek Dual Frequency (315/390 MHz) to minimize interference and improve performance.

This remote is an ideal replacement for existing Genie Intellicode remotes that are no longer functioning correctly. It comes with a simple single-button design and a visor clip for easy placement within your vehicle.

„Genie G1T“ vieno mygtuko garažo vartų atidarytuvo nuotolinio valdymo pultas

Figure 1: Genie G1T Single Button Garage Door Opener Remote.

2. Sąranka ir programavimas

Programming the Genie G1T remote is a straightforward process. Follow these steps to link your remote to your Genie Intellicode garage door opener:

  1. Raskite mygtuką „Mokytis“: On your Genie garage door opener power head (the unit mounted on the ceiling), locate the "Learn Code" button. The location may vary depending on your specific opener model. Refer to your garage door opener's manual if you cannot find it.
  2. Įjungti mokymosi režimą: Press and release the "Learn Code" button once. The LED indicator on the opener will begin to flash, indicating it is in programming mode. You typically have about 30 seconds to complete the next step.
  3. Nuotolinio valdymo pulto programavimas: Within 30 seconds of activating the learn mode, press and release the button on your G1T remote that you wish to program. The opener's LED will usually go solid or blink rapidly to confirm it has recognized the remote.
  4. Patvirtinkite programavimą: Press and release the same button on your G1T remote again. The garage door opener's LED should turn off, and the garage door should activate (open or close). This confirms successful programming.
  5. Išbandykite nuotolinio valdymo pultą: Test the remote by pressing the programmed button. The garage door should respond.

If the remote does not work after following these steps, repeat the process. Ensure you are within range of the garage door opener during programming.

Genie G1T Remote with Visor Clip

Figure 2: The Genie G1T remote includes a visor clip for convenient placement in your vehicle.

3. Naudojimo instrukcijos

The Genie G1T remote is designed for simple operation:

The remote utilizes Auto-Seek Dual Frequency (315/390 MHz) to automatically select the best frequency, ensuring reliable operation and minimizing interference from other devices.

Genie G1T Remote with Auto-Seek Dual Frequency feature

Figure 3: The Auto-Seek Dual Frequency feature minimizes interference and improves overall performance.

4. Priežiūra

The Genie G1T remote requires minimal maintenance. The primary maintenance task is battery replacement.

Baterijos keitimas

The remote uses a CR2032 lithium coin cell battery. When the remote's range decreases or it stops responding, it's likely time to replace the battery.

  1. Atidarykite nuotolinio valdymo pultą Casing: Carefully open the remote's casing. There is usually a small notch or seam where you can gently pry it open with a small flathead screwdriver or a coin.
  2. Išimkite seną bateriją: Remove the old CR2032 battery from its compartment. Note the orientation of the battery (+ side up or down).
  3. Įdėkite naują bateriją: Insert a new CR2032 battery, ensuring it is placed in the correct orientation.
  4. Uždarykite Casing: Nuspauskite nuotolinio valdymo pultąasintvirtai sudėkite.
  5. Išbandyti nuotolinio valdymo pultą: Test the remote to ensure it functions correctly with your garage door opener.
Genie G1T Remote showing battery compartment

4 paveikslas: View of the remote's battery compartment, showing the CR2032 battery.

5. Problemų sprendimas

If your Genie G1T remote is not functioning as expected, consider the following troubleshooting steps:

If these steps do not resolve the issue, consult the full garage door opener manual or contact Genie customer support.

6. Specifikacijos

FunkcijaDetalė
Modelio numerisG1T
Dalies numeris39907R
Prekės ženklasGenie
SuderinamumasAll Intellicode equipped Genie openers
DažnisAuto-Seek Dual Frequency (315/390 MHz)
Mygtukų skaičius1
Baterijos tipasCR2032 (įtraukta)
SpalvaJuoda
Prekės svoris3.52 uncijos
Gaminio matmenys10.75 x 7.75 x 2.75 colio
Ypatinga funkcijaErgonomic design, Visor clip included

7. Garantija ir palaikymas

The Genie G1T Single Button Garage Door Opener Remote comes with a 1 metų gamintojo garantija.

For further assistance, technical support, or warranty claims, please contact Genie customer service. Refer to the packaging or the official Genie websvetainę, kurioje rasite naujausią kontaktinę informaciją.

2 vaizdo įrašas: šiame vaizdo įraše pateikiamas bendrasview of Genie Garage Door Opener Genuine Accessories, highlighting the quality and innovation of Genie products.

Susiję dokumentai - G1T

Preview „GenieMaster“ siųstuvo naudojimo ir programavimo vadovas
Šiame vadove pateikiamos „GenieMaster“ siųstuvo, suderinamo su „Intellicode 1“, „Intellicode 2“ ir kodinio jungiklio garažo vartų atidarytuvais, naudojimo ir programavimo instrukcijos. Jame pateikiami saugos įspėjimai, programavimo veiksmai ir informacija apie baterijų keitimą.
Preview „Genie“ 3 mygtukų nuotolinio valdymo pulto programavimo instrukcijos
Žingsnis po žingsnio vadovas, kaip programuoti „Genie“ 3 mygtukų nuotolinio valdymo pultelius garažo vartų atidarytuvams, įskaitant instrukcijas naujiems atidarytuvams ir modeliams, pagamintiems nuo 1995 iki 2011 m. Apima programavimą ir kt.asing nuotolinio valdymo pultai ir baterijų keitimas.
Preview Pakaitinis „Genie Intellicode“ garažo vartų nuotolinio valdymo pultas – RC-SM26-GN-1 naudotojo vadovas
Šiame vadove pateikiamos pakaitinio „Genie Intellicode“ garažo vartų nuotolinio valdymo pulto, modelio RC-SM26-GN-1, specifikacijos ir programavimo instrukcijos. Sužinokite, kaip užprogramuoti nuotolinio valdymo pultą „Intellicode 1“ ir „Intellicode 2“ atidarytuvams, pakeisti bateriją ir ištrinti esamus nuotolinio valdymo pultus.
Preview „Genie“ belaidės klaviatūros „Intellicode“ programavimo ir naudojimo instrukcijos
Išsamus „Genie Intellicode“ belaidžių klaviatūrų vadovas, apimantis programavimą, naudojimą, montavimą, baterijų keitimą ir trikčių šalinimą. Apima saugos įspėjimus ir informaciją apie reglamentus.
Preview Genie Intellicode® 315/390MHz Single Door External Receiver Kit Installation Guide
Installation and programming guide for the Genie Intellicode® 315/390MHz Single Door External Receiver Kit. Learn how to connect, program remotes, and troubleshoot.
Preview „Genie GK-R“ belaidės klaviatūros instrukcijos
Šiame dokumente pateikiamos „Genie GK-R“ belaidės klaviatūros, skirtos garažo vartų atidarytuvams, programavimo ir naudojimo instrukcijos. Jame aprašomas PIN kodo nustatymas, vienų ir kelių vartų programavimas, klaviatūros valdymas, montavimas, baterijų keitimas ir klaviatūros gamyklinių nustatymų atkūrimas.