1. Įvadas
The NICREW ClassicLED Plus LED Aquarium Light is designed to provide optimal lighting for freshwater or saltwater fish and low-to-medium light level aquatic plants. This full-spectrum light combines 6500K white, 450nm blue, TRUE 660nm deep red, and green LEDs to produce a fine-tuned color spectrum. It features a programmable timer with adjustable auto On/Off times, brightness, and ramp-up/dim-down periods to simulate natural sunrise and sunset cycles.
2. Saugos instrukcijos
- Always unplug the fixture from the power outlet before performing any maintenance or cleaning.
- This product is designed for indoor use only. Do not immerse the light fixture in water.
- Ensure the power cord is not damaged. If damaged, do not operate the fixture.
- Laikyti vaikams nepasiekiamoje vietoje.
- Do not operate if any part of the fixture is wet. Dry thoroughly before plugging in.
- Ensure the light is securely mounted on the aquarium to prevent accidental falls into the water.
3. Pakuotės turinys
Patikrinkite, ar visi daiktai yra ir yra geros būklės:
- NICREW ClassicLED Plus LED Aquarium Light Fixture
- Wired Controller with Timer
- Adjustable Mounting Brackets (2x)
- Maitinimo adapteris
4. Sąranka ir diegimas
- Išpakuokite šviesą: Carefully remove the light fixture and all components from the packaging.
Figure 1: NICREW ClassicLED Plus LED Aquarium Light fixture. This image shows the main light fixture with its array of white, blue, red, and green LEDs, and the extendable mounting brackets attached.
- Pritvirtinkite tvirtinimo kronšteinus: Slide the adjustable docking mounts onto both ends of the light fixture. These brackets allow for easy adaptation to fit most rimless and framed aquariums.
Figure 2: Close-up of the light showing the extendable mounting bracket and enhanced heat sink design. The image highlights the extendable mounting bracket for flexible installation and the enhanced heat sink design for better heat dissipation.
- Padėkite šviesą: Place the light fixture securely on top of your aquarium. Adjust the extendable brackets to ensure a stable fit across the tank's width.
Figure 3: Dimensions and aquarium fitment guide. This diagram illustrates the various sizes available for the ClassicLED Plus and their corresponding dimensions, ensuring proper fitment for tanks ranging from 12 to 54 inches.
- Prijunkite maitinimą: Plug the wired controller into the light fixture, then connect the power adapter to the controller and finally to a power outlet.
5. Naudojimo instrukcijos
The NICREW ClassicLED Plus features a wired controller for programming the light cycle and adjusting settings. The light offers two independent channels: Channel 1 (CH1) for White, Red, and Green LEDs, and Channel 2 (CH2) for Blue LEDs.
5.1. Valdiklis perview
This image demonstrates the independent control of Channel 1 (White, Red, Green LEDs) and Channel 2 (Blue LEDs), with brightness adjustable from 0% to 100%. Note that manual mode brightness is fixed at 100%.
5.2 Laikmačio nustatymas
The controller allows you to set a 24-hour light cycle with customizable on/off times, brightness levels, and ramp-up/dim-down periods for both channels. If you are changing pre-programmed settings, ensure the fixture is not left idle too long, or you may need to restart the process.
- Paspauskite NUSTATYTI button to enter programming mode. The display will show "00:00" and flash.
- Naudokite VALANDA ir MINUTĖ mygtukai dabartiniam laikui nustatyti.
- Paspauskite NUSTATYTI again. The display will show "ON" briefly, then flash the current time. Use VALANDA ir MINUTĖ to set the desired ON time for Channel 1 (White, Red, Green LEDs).
- Paspauskite NUSTATYTI. The display will show "OFF" briefly, then flash the current time. Use VALANDA ir MINUTĖ to set the desired OFF time for Channel 1.
- Paspauskite NUSTATYTI. The display will show "100" briefly. Use VALANDA (+) ir MINUTĖ (-) to set the brightness percentage (0-100%) for Channel 1.
- Repeat steps c-e for Channel 2 (Blue LEDs).
- Paspauskite NUSTATYTI. The display will flash the current ramp time mode (00, 15, or 30). Use VALANDA (+) arba MINUTĖ (-) to choose between 00 (straight on/off), 15 (15-minute ramp-up/dim-down), or 30 (30-minute ramp-up/dim-down).
- Paspauskite NUSTATYTI to save and exit the settings.
This graph visually represents a typical 24-hour light cycle, showing how Channel 1 (White, Red, Green LEDs) and Channel 2 (Blue LEDs) can be programmed with different on/off times, brightness levels, and ramp-up/dim-down periods to simulate natural lighting conditions.
5.3. Rankinis valdymas
To manually turn the light on or off, or switch between modes without using the timer, press the power button on the controller. In manual mode, the brightness is fixed at 100%.
5.4. Video Tutorial: Programming the Timer
This video provides a step-by-step guide on how to program the integrated timer on your NICREW ClassicLED Plus light, including setting the current time, on/off times for each channel, brightness, and ramp-up/dim-down durations.
6. Priežiūra
- Valymas: Regularly wipe the light fixture with a soft, dry cloth to remove dust and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners or solvents.
- LED paviršius: Gently clean the LED surface with a damp Jei reikia, nuvalykite šluoste. Venkite subraižyti paviršiaus.
- Power Cord and Connections: Periodically inspect the power cord and all connections for any signs of damage or wear. Replace if necessary.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia. | Power not connected, faulty outlet, damaged cable/fixture. | Check power connections. Test outlet with another device. Inspect cable for damage. Contact support if fixture is faulty. |
| Laikmačio nustatymai prarandami išjungus maitinimątage. | The internal clock resets on power loss, but programmed schedules are retained. | Manually reset the current time on the controller after a power outage. The light will then resume its programmed schedule. |
| Light is too bright/dim. | Brightness settings are incorrect or in manual mode. | Adjust brightness levels in programming mode for timed cycles. Note that manual mode is fixed at 100% brightness. |
| Šviesa mirksi arba mirksi. | Atsilaisvinęs prijungimas, įtampos svyravimai, vidinis gedimas. | Check all connections. Ensure stable power supply. If problem persists, contact support. |
8. Specifikacijos
- Modelis: N10372
- Vattage: 15 vatų
- Ryškumas: 850 liumenų
- Dimensions (Light Fixture): 17.52"L x 4.57"W x 2.52"H (for 18-24 inch tank)
- Medžiaga: Acrylic, Aluminum, Glass
- Šviesos šaltinio tipas: LED (6500K white, 450nm blue, TRUE 660nm deep red, green)
- Kontrolės metodas: Wired Controller with Timer
- Maitinimo šaltinis: Laidinis elektrinis (20 V nuolatinė srovė)
- Atsparumo vandeniui lygis: Neatsparus vandeniui (nemerkite į vandenį)
9. Garantija ir palaikymas
NICREW products are designed for ease of use and enjoyment. This product comes with a hassle-free 12-month warranty. For any questions, concerns, or technical support, please contact NICREW customer service. We are dedicated to providing quality products and support to ensure a better fish keeping experience.
For further assistance, please visit the official NICREW Store: NICREW Store on Amazon
