Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the Foxeer Predator Micro V2 FPV Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Produktas baigtasview
The Foxeer Predator Micro V2 is a high-performance FPV camera designed for racing drones and other multirotors. It features Super WDR, 1000TVL resolution, and an On-Screen Display (OSD) for easy configuration.
Image: Foxeer Predator Micro V2 FPV Camera, front view.
Pagrindinės funkcijos:
- Didelė raiška: 1000TVL for clear image quality.
- Super WDR: Excellent performance in varying light conditions.
- Maža delsa: Minimum to 4ms for responsive FPV flying.
- OSD: Built-in On-Screen Display for easy settings adjustment.
- Kompaktiškas dydis: Lightweight at 5.5g (excluding bracket) and small dimensions (18.6 x 19.0mm).
- Platus ttage Įvestis: Supports 5-40V.
Image: Visual representation of the Predator Micro V2 highlighting clearer image quality, brighter dark zones, and new DSY/NIGHT, LED, and V CAL features.
Image: Depiction of the camera's low latency, showing the camera transmitting to a monitor with minimal delay.
Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai. Jei kurių nors daiktų trūksta arba jie pažeisti, susisiekite su pardavėju.
- 1x Foxeer Predator Micro V2 Camera
- 1x OSD Board
- 1x Servo Cable
- 1x OSD Cable
- 1x laikiklis
- 4x Gasket Rings
- 4x laikiklio varžtai
- 2x Case Screws
- 1x vartotojo vadovas
Image: All components included in the Foxeer Predator Micro V2 package, including the camera, OSD board, cables, bracket, and screws.
Specifikacijos
Detailed technical specifications for the Foxeer Predator Micro V2 FPV Camera:
Image: A table summarizing the technical specifications of the Foxeer Predator Micro V2 camera.
| Funkcija | Specifikacija |
|---|---|
| Modelis | Foxeer Predator Micro V2 |
| Rezoliucija | 1000TVL |
| TV sistema | NTSC |
| CVBS | 4:3 ekranas |
| Latencija | Minimum to 4ms |
| OSD | Taip |
| WDR | Taip |
| Įvesties tomastage | 5-40V |
| Svoris | 5.5g (excluding bracket) |
| Dydis | 18.6x19.0mm |
| V CAL | ttage calibration, range -0.5~0.5 |
| DIENA/NAKTIS | AUTOMATINIS ir rankinis |
| Vaizdo apversti | Off/ H-Flip / V-Flip/ HV-Flip |
| Kalbos | English/ Deutsch/ Francais / Pyccknn / Portugues / Espanol / Chinese |
The camera features a 1.8mm lens with a FOV-D (Diagonal Field of View) of 150°.
Image: Diagram illustrating the Field of View (FOV-V, FOV-H, FOV-D) for the 1.8mm M8 lens, indicating a 150° diagonal field of view.
Sąranka
Montavimas
- Montavimas: Use the provided bracket and screws to securely mount the Predator Micro V2 camera onto your drone frame. Ensure the camera is oriented correctly. The multi-functional bracket allows for easy switching between standard and mini sizes.
- Laidai: Connect the camera to your flight controller or video transmitter using the provided servo cable and OSD cable. Ensure correct polarity for power (5-40V input). Refer to your flight controller/VTX manual for specific wiring diagrams.
Pradinis įjungimas
After installation, connect power to your drone. The camera should power on and display video output.
Veikiantis
Ekrano ekrano (OSD) meniu
The Predator Micro V2 features an integrated OSD for easy configuration. Use the OSD board (joystick) to navigate and adjust settings.
Image: Screenshots of the OSD menu, showing options for setup (Camera ID, Picture Adjust, Day/Night, LED, V CAL, Camera Reset) and display settings (Time, Power, V CAL, LED).
Naršymas OSD
- Connect the OSD board to the camera.
- Įjunkite fotoaparatą.
- Use the joystick on the OSD board to navigate through the menu options.
- Press the center button to select an option or confirm a setting.
- Move the joystick left/right to change values.
- Select "EXIT" to save changes and exit the menu.
Pagrindiniai OSD nustatymai
- DIENA NAKTIS: Set to AUTO for automatic switching, or MANUAL to select permanent COLOR or B/W mode.
- LED: Adjust LED brightness (OFF/MID/DARK).
- V CAL (Voltage Calibration): Sureguliuoti ttage reading with a range of -0.5 to 0.5.
- Vaizdo apvertimas: Options include Off, H-Flip (horizontal), V-Flip (vertical), and HV-Flip (horizontal and vertical).
- Kalbos: Select from English, Deutsch, Francais, Pyccknn, Portugues, Espanol, or Chinese.
Priežiūra
- Valymas: Regularly clean the camera lens with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
- Patikra: Periodically inspect all cables and connections for signs of wear or damage. Ensure the camera is securely mounted.
- Saugykla: When not in use, store the camera in a dry, dust-free environment, away from extreme temperatures.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Nėra vaizdo išvesties | Neteisingas laidų pajungimas; Nėra maitinimo; Pažeistas kabelis; Neteisingas televizoriaus sistemos nustatymas. | Check all wiring connections for correct polarity and secure fit. Ensure power is supplied within the 5-40V range. Replace damaged cables. Verify TV System (NTSC) matches your receiver. |
| Image is dark/bright | Incorrect exposure settings; DAY/NIGHT mode issue. | Adjust exposure settings via the OSD menu. Check DAY/NIGHT mode; try setting it to AUTO or manually to COLOR/B&W. |
| Image is upside down/reversed | Image Flip setting enabled. | Access the OSD menu and set "Image Flip" to "Off". |
| OSD not appearing | OSD board not connected or faulty. | Ensure the OSD board is correctly connected to the camera. Test with another OSD board if available. |
| ttage reading inaccurate | V CAL setting needs adjustment. | Use the OSD menu to adjust the "V CAL" setting to match a known voltage skaitymas. |
Garantija ir palaikymas
For warranty information and technical support, please refer to the official FOXEER websvetainėje arba susisiekite su vietiniu platintoju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
For further assistance, you may visit the FOXEER store on Amazon: FOXEER Amazon Store.
