Įvadas
Thank you for choosing the NICREW Electric Gravel Vacuum. This 2-in-1 device is designed to simplify aquarium maintenance by efficiently cleaning gravel and facilitating water changes. Please read this manual thoroughly before use to ensure proper operation and longevity of your product.
Image: The NICREW Electric Gravel Vacuum effectively cleaning aquarium gravel.
Produkto komponentai
The NICREW Electric Gravel Vacuum comes with the following parts:
- Gravel Cleaner Device (Main Unit)
- Pratęsimo antgalis
- Siurbimo antgalis
- Prailginimo vamzdis
- Siphon Cap
- Filter Element (pre-installed, with spares)
- Maitinimo adapteris
Image: All components of the NICREW Electric Gravel Vacuum, including the main unit, various nozzles, extension tube, siphon cap, and filter elements.
Sąranka ir surinkimas
Follow these steps to assemble your gravel vacuum:
- Pritvirtinkite prailginimo vamzdį: Connect the extension tube to the main gravel cleaner device by twisting until secure.
- Pasirinkite purkštuką: Choose either the Extension Nozzle (for deeper tanks) or the Suction Nozzle (for general use) and attach it to the end of the extension tube.
- Insert Filter Element: Ensure the super-fine mesh filter element is correctly inserted into the main unit.
- Maitinimo jungtis: Prijunkite maitinimo adapterį prie pagrindinio įrenginio ir įjunkite jį į tinkamą maitinimo lizdą.
Video: Official NICREW demonstration of assembling the electric gravel cleaner and its various components.
Naudojimo instrukcijos
The NICREW Electric Gravel Vacuum offers two primary functions: gravel cleaning and water changing.
1. Gravel Cleaning Mode
- Paruošimas: Ensure the filter element top cover is installed.
- Panardinti: Place the nozzle end into the aquarium water. The motor will only activate when the water level reaches the minimum start-up line (approximately 8.5 inches from the bottom of the main unit). Ensure the vents at the base of the unit are fully submerged for optimal suction.
- Suaktyvinti: Norėdami įjungti įrenginį, paspauskite maitinimo mygtuką.
- Clean Gravel: Gently move the nozzle through the gravel. The suction will pull debris and waste into the filter element while allowing clean water to return to the tank. Avoid pressing too hard into the substrate to prevent disturbing beneficial bacteria.
- Vietų valymas: Ideal for quick spot maintenance to remove particles from the topmost layer of substrate.
Image: The gravel vacuum efficiently removing debris from the aquarium substrate.
2. Water Changing Mode
- Paruošimas: Remove the filter element top cover and attach the siphon cap with the hose connector. Connect the provided hose to the siphon cap. Direct the other end of the hose into a bucket or drain.
- Submerge & Activate: Follow the same submerging and activation steps as for gravel cleaning.
- Išleiskite vandenį: The device will pump water out of the aquarium through the hose. Monitor the water level to avoid removing too much water. It is recommended to change up to a maximum of 25% of your total aquarium water every 2 to 4 weeks to maintain a stable environment.
Image: The electric gravel vacuum being used to siphon water out of an aquarium for a water change.
Priežiūra
Regular cleaning of your gravel vacuum ensures optimal performance and extends its lifespan.
Cleaning the Filter Element
- Turn Off & Remove: Always turn off and unplug the device before performing any maintenance. Carefully remove the filter element from the main unit.
- Išskalauti: Rinse the filter element thoroughly under running tap water to remove all trapped debris and waste.
- Surinkti iš naujo: Once clean, reinsert the filter element into the main unit.
Image: The filter element being detached from the main unit for cleaning.
Video: A user demonstrating the ease of rinsing the filter element under running water.
Darbaračio valymas
If you notice a significant reduction in suction power, the impeller may be obstructed or dirty.
- Išardyti: Carefully disassemble the lower part of the main unit to access the impeller.
- Išvalyti: Remove any debris, hair, or other obstructions from the impeller and its housing.
- Surinkti iš naujo: Ensure all parts are reassembled correctly and securely.
Image: The impeller, a key component for suction, shown for inspection and cleaning.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Mažas siurbimas arba jo nėra |
|
|
| Variklis neužsiveda |
|
|
| Vandens nutekėjimai |
|
|
Specifikacijos
- Modelio numeris: HXS-01
- Prekės svoris: 2.05 svaro
- Prekės pakuotės matmenys: 17.27 x 5.99 x 2.67 colio
- Galia: 6W
- ttage / dažnis: 120V 60Hz
- Srauto greitis: 90 GPH (galonų per valandą)
- Didžiausias vandens gylis: Up to approximately 28 inches
- Medžiagos ypatybė: Ekologiškas
- Specifiniai naudojimo būdai: Aquarium cleaning and water changes
Garantija ir palaikymas
The NICREW Electric Gravel Vacuum comes with a Hassle-Free 12-Month Warranty. For any questions, concerns, or technical assistance, please contact our Draugiškas klientų aptarnavimas 24 valandas per parą. Refer to your product packaging or the official NICREW websvetainę, kurioje pateikiami konkretūs kontaktiniai duomenys.
