1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of the Yealink Wall Mount Bracket, designed specifically for Yealink SIP-T27G and SIP-T29G IP phones. Please read this manual thoroughly before installation to ensure proper and safe use of the product.
2. Saugos informacija
- Always ensure the mounting surface is strong enough to support the weight of the bracket and the phone.
- Montavimui naudokite tinkamus įrankius ir įrangą. Jei abejojate, kreipkitės į kvalifikuotą specialistą.
- Smulkias dalis laikykite vaikams nepasiekiamoje vietoje, kad išvengtumėte užspringimo pavojaus.
- Do not overtighten screws, as this may damage the bracket or the mounting surface.
- Ensure all cables are routed safely to prevent tripping hazards or damage.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- Yealink Wall Mount Bracket (1)
- Mounting Screws (e.g., 2-4 screws, depending on design)
- Wall Anchors (if applicable, for drywall installation)
- Greitos pradžios vadovas (1)
1 pav.: pvz.ample of Yealink Wall Mount Bracket and included hardware.
4. Sąranka ir diegimas
Follow these steps to install the wall mount bracket and secure your IP phone.
4.1 Reikalingi įrankiai
- Pieštukas
- Gręžtuvas
- Drill bit (appropriate size for anchors/screws)
- Atsuktuvas (rekomenduojama „Phillips“ galvutė)
- Level (optional, for precise alignment)
4.2 diegimo žingsniai
- Pasirinkite vietą: Select a suitable wall location that is structurally sound and allows for easy access to power and network cables. Ensure the height is convenient for phone use.
- Gręžimo taškų žymėjimas: Hold the wall mount bracket against the wall at the desired height and use a pencil to mark the positions for the mounting screws. Use a level to ensure the bracket is straight.
- Gręžimo bandomosios skylės: Using the appropriate drill bit, drill pilot holes at the marked locations. If installing into drywall, insert wall anchors into the pilot holes until flush with the wall surface.
- Pritvirtinkite laikiklį: Align the bracket with the drilled holes (or anchors) and insert the mounting screws. Tighten the screws firmly with a screwdriver until the bracket is securely fastened to the wall. Do not overtighten.
- Prijunkite telefoną: Carefully slide your Yealink SIP-T27G or SIP-T29G IP phone onto the bracket. Ensure it clicks into place or is otherwise securely seated according to the bracket's design.
- Prijunkite kabelius: Route the power and network cables to the phone, ensuring they are not strained or pinched.
5. Naudojimo instrukcijos
Once installed, the Yealink Wall Mount Bracket provides a stable platform for your IP phone.
- Telefono padėjimas: Gently align the phone's mounting slots with the bracket's tabs and slide it downwards until it locks into position.
- Telefono pašalinimas: To remove the phone, lift it slightly and slide it upwards to disengage it from the bracket. Exercise caution to avoid dropping the phone.
- Koregavimai: If the bracket offers any adjustable features (e.g., tilt), refer to the specific instructions provided with your bracket model for adjustment procedures.
6. Priežiūra
Regular maintenance ensures the longevity and proper function of your wall mount bracket.
- Valymas: Wipe the bracket with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which may damage the finish.
- Patikra: Periodically check all mounting screws to ensure they remain tight. Inspect the bracket for any signs of wear or damage. If damage is observed, replace the bracket immediately.
7. Problemų sprendimas
If you encounter issues with your wall mount bracket, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Bracket feels loose on the wall. | Screws are not tight enough, or wall anchors are not properly seated. | Tighten screws. If still loose, consider using larger anchors or relocating to a stud. |
| Phone does not fit or is unstable on the bracket. | Incorrect phone model for the bracket, or phone not properly engaged. | Ensure your phone is a Yealink SIP-T27G or SIP-T29G. Re-seat the phone carefully. |
| Cables are difficult to manage. | Cables are too short or not routed efficiently. | Use longer cables if necessary. Utilize cable ties or clips to organize cables neatly. |
8. Specifikacijos
- Prekinis ženklas: Yealink
- Suderinami telefonų modeliai: SIP-T27G, SIP-T29G
- Montavimo tipas: Sieninis laikiklis
- Spalva: Juoda
- Prekės svoris: 3.41 uncijos (apie 96.67 gramų)
- Pakuotės matmenys: 8.07 x 6.5 x 2.2 colio (apytiksliai 20.5 x 16.5 x 5.6 cm)
- Ypatingos savybės: Reguliuojamas
- ASIN: B07H6T41CC
- Gamintojas: Yealink
9. Garantija ir palaikymas
Dėl garantijos informacijos ir techninės pagalbos kreipkitės į oficialią „Yealink“ svetainę. websvetainėje arba susisiekite su vietiniu platintoju. Išsaugokite pirkimo kvitą, jei prireiktų pateikti pretenziją dėl garantijos.
Yealink oficialus Websvetainė: www.yealink.com