1. Įvadas
Thank you for choosing the ADATA SU650 Series Solid State Drive. This manual provides essential information for the proper installation, operation, and maintenance of your new SSD. The ADATA SU650 240GB Internal SSD is designed to significantly enhance your computer's performance, offering superior transfer speeds compared to traditional hard disk drives. Its solid-state technology ensures increased durability and quiet operation, making it an excellent choice for upgrading your system.
2. Produktas baigtasview
The ADATA SU650 SSD utilizes 3D NAND Flash technology, providing high capacity, improved efficiency, and enhanced reliability. It features a high-speed SATA III interface, delivering fast read/write performance for quicker system boot-ups and application loading.

2.1 pav.: priekis view of the ADATA SU650 Solid State Drive.
3. Pagrindinės savybės
- 3D NAND Flash Technology: Offers higher capacity, efficiency, and reliability compared to 2D NAND SSDs.
- High-Speed SATA III Interface: Provides read/write speeds up to 520/450MB/s for rapid data transfer.
- SLC Caching: Boosts performance by operating in single-level cell mode.
- Advanced Error Correction Technologies: Ensures data integrity and extends the lifespan of the SSD.
- Tylus veikimas: Absence of moving parts results in silent performance.
- Padidintas patvarumas: More resistant to shock and vibration than traditional HDDs.

Figure 3.1: Illustration highlighting 3D NAND Flash technology.
4. Sąranka ir diegimas
The ADATA SU650 SSD is compatible with most desktop computers and laptops that support a 2.5-inch SATA drive.
4.1 Prieš montavimą
- Back up all important data from your existing drive.
- Įsitikinkite, kad jūsų sistema yra išjungta ir atjungta nuo maitinimo šaltinio.
- Įžeminkite save, kad išvengtumėte elektrostatinės iškrovos (ESD).
- Gather necessary tools: screwdriver, SATA data cable, SATA power cable (if not already available).
4.2 Diegimo veiksmai (bendrieji)
- Open your computer case or laptop bay.
- Locate an available 2.5-inch drive bay. If replacing an existing HDD, remove the old drive.
- Slide the ADATA SU650 SSD into the drive bay and secure it with screws if necessary.
- Connect a SATA data cable from the SSD to an available SATA port on your motherboard.
- Prijunkite SATA maitinimo laidą prie maitinimo bloko (PSU) ir SSD disko.
- Close your computer case or laptop bay.
- Reconnect power and boot your system.

Figure 4.1: The compact 2.5-inch form factor of the ADATA SU650 SSD, ready for installation.
5. SSD disko valdymas
After physical installation, your operating system will need to recognize and prepare the new drive.
5.1 Initializing and Formatting (New Drive)
If this is a new SSD, you will need to initialize and format it before use.
- „Windows“: Open Disk Management (right-click Start button > Disk Management). Locate the new SSD, right-click it, and select "Initialize Disk." Choose MBR or GPT (GPT is recommended for modern systems). Then, right-click the unallocated space and select "New Simple Volume" to format it.
- macOS: Open Disk Utility (Applications > Utilities > Disk Utility). Select the new SSD, click "Erase," choose a format (e.g., APFS or Mac OS Extended), and a scheme (e.g., GUID Partition Map).
- Linux: Use tools like GParted or
fdisk/mkfsfrom the terminal to partition and format the drive.
5.2 Data Migration and Management
ADATA provides free data management software to help with data migration and optimization. This software can assist in cloning your existing operating system to the new SSD or managing its performance.

Figure 5.1: ADATA's free data management software simplifies data migration and backup processes.
6. Priežiūra
SSDs generally require less maintenance than traditional HDDs. However, following these practices can help ensure optimal performance and longevity:
- Nuolat atnaujinkite programinę-aparatinę įrangą: Periodically check the ADATA website for firmware updates for your SU650 SSD. Firmware updates can improve performance, stability, and compatibility.
- Įgalinti TRIM: Ensure TRIM is enabled in your operating system. TRIM helps the SSD manage its data more efficiently, preventing performance degradation over time. Modern operating systems typically enable this by default.
- Venkite pilno pajėgumo: Try to avoid filling the SSD to its absolute maximum capacity. Leaving some free space (e.g., 10-15%) allows the SSD's wear-leveling algorithms to function optimally.
- Įprastos atsarginės kopijos: While SSDs are reliable, no storage device is immune to failure. Regularly back up your important data to another drive or cloud storage.
- Venkite defragmentacijos: Do not defragment an SSD. Defragmentation is designed for HDDs and can reduce the lifespan of an SSD without providing any performance benefit.
7. Problemų sprendimas
If you encounter issues with your ADATA SU650 SSD, consider the following troubleshooting steps:
- SSD neaptiktas:
- Check SATA data and power cable connections. Ensure they are securely plugged into both the SSD and the motherboard/PSU.
- Try a different SATA port on your motherboard.
- Verify that the SATA controller mode in your BIOS/UEFI is set to AHCI (not IDE).
- Test the SSD in another computer if possible to rule out a system-specific issue.
- Lėtas našumas:
- Ensure TRIM is enabled (as mentioned in Maintenance section).
- Patikrinkite, ar SSD prijungtas prie SATA III (6 Gb/s) prievado. Prijungus prie senesnio SATA II (3 Gb/s) prievado, našumas sumažės.
- Patikrinkite, ar jūsų operacinė sistema ir tvarkyklės yra atnaujintos.
- Ensure the SSD is not excessively full.
- Run a diagnostic tool (e.g., ADATA SSD Toolbox, if available) to check the drive's health and performance.
- Sistemos nestabilumas / gedimai:
- Ensure your system's power supply is adequate and stable.
- Check for any loose connections within your computer.
- Run a memory diagnostic to rule out RAM issues.
- Consider reinstalling your operating system if other solutions fail, after backing up your data.
Jei šie veiksmai neišsprendžia problemos, daugiau pagalbos rasite skyriuje „Garantija ir palaikymas“.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | ASU650SS-240GT-C |
| Talpa | 240 GB |
| Sąsaja | SATA III 6Gb/s (backward compatible with SATA II 3Gb/s) |
| NAND Flash | 3D NAND |
| Formos faktorius | 2.5 colių |
| Matmenys (I x P x A) | 2.75 x 3.94 x 0.28 colio (69.85 x 100.45 x 7 mm) |
| Svoris | 1.41 uncijos (40 g) |
| Darbinė temperatūra | 0°C iki 70°C |
| Laikymo temperatūra | -40°C iki 85°C |
| Atsparumas smūgiams | 1500G/0.5ms |
| Atsparumas vibracijai | 10~2000Hz/1.5mm (Non-operating) |
| Energijos suvartojimas | (Details vary by capacity, typically low for SSDs) |
| MTBF (vidutinis laikas tarp gedimų) | 2,000,000 valandos |
9. Garantija ir palaikymas
The ADATA SU650 SSD comes with a 1 metų garantija nuo pirkimo datos. Ši garantija apima medžiagų ir gamybos defektus normaliai naudojant.
For technical support, warranty claims, or to download the latest drivers and firmware, please visit the official ADATA websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba.
ADATA Official Websvetainė: www.adata.com
You can also find more information and support resources on the ADATA store page: ADATA Amazon Store.
10. Saugos informacija
- Visada atsargiai elkitės su SSD disku, kad išvengtumėte fizinės žalos.
- Protect the SSD from extreme temperatures, humidity, and direct sunlight.
- Do not attempt to disassemble or modify the SSD, as this will void the warranty and may cause damage.
- Keep the SSD away from strong magnetic fields.
- Elektronines atliekas utilizuokite atsakingai, laikydamiesi vietinių taisyklių.





