WAC Lighting Aether 2in Round Light Engine Trim & LED Instruction Manual

1. Įvadas ir pabaigaview

The WAC Lighting Aether 2in Round Light Engine Trim & LED is a high-performance recessed downlight designed for various indoor and outdoor applications. Its ultra-low profile design allows for installation in tight plenum spaces. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture.

Pagrindinės funkcijos:

• Available in Round, Square, Flangeless Invisible, Adjustable, and Wall Wash configurations.
• Designed for use with New Construction Housings: HR-2LED-H13A or HR-2LED-H13AC.
• Itin žemas profile design with a 2.5-inch housing height for 2-inch trims.
• Smooth and continuous dimming capability down to 1% with compatible dimmers (Electronic Low Voltage or 0-10V).
• High-powered, replaceable LED light engine with 2700K color temperature, 90 CRI, and 65,000 rated hours.

2. Saugos informacija

Prieš pradėdami montuoti, perskaitykite ir supraskite visas instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras ar kiti pavojai, dėl kurių gali būti sugadintas turtas ar sužaloti asmenys.

• ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami arba atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
• Visos elektros jungtys turi atitikti vietinius kodeksus, potvarkius arba Nacionalinį elektros kodeksą (NEC). Jei nesate susipažinę su tinkamu elektros laidų prijungimu, pasitarkite su kvalifikuotu elektriku.
• Užtikrinkite tiekimo tūrįtage yra teisinga, lyginant ją su šviestuvo etiketės informacija.
• Do not install in areas where the operating temperature exceeds the fixture's rated temperature.
• Jokiu būdu nemodifikuokite įrenginio. Bet kokie pakeitimai gali panaikinti garantiją ir sukelti pavojų saugai.
• Šį gaminį turi sumontuoti asmuo, susipažinęs su gaminio konstrukcija ir veikimu bei susijusiais pavojais.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• Instrukcijų vadovas
• Light fixture (Aether 2in Round Light Engine Trim & LED)
• Montavimo įranga

Image 3.1: WAC Lighting Aether 2in Round Light Engine Trim & LED. This image shows the complete recessed lighting trim with its black and white finish, ready for installation.

4. Sąranka ir diegimas

Prieš pradėdami:

• Išjunkite maitinimą prie grandinės pertraukiklio arba saugiklių dėžutės.
• Ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.
• Confirm that the compatible new construction housing (HR-2LED-H13A or HR-2LED-H13AC) is already installed.

Žingsnis po žingsnio diegimas:

1. Paruoškite būstą: Ensure the power to the recessed housing is off. Remove any existing trim or components from the housing.
2. Prijunkite laidus: Locate the wiring connector from the LED light engine. Connect it to the corresponding connector inside the recessed housing. Ensure a secure connection.
3. Įterpti apdailą: Carefully push the Aether 2in Round Light Engine Trim into the recessed housing. The spring clips on the trim will engage with the housing to hold it securely in place. Apply gentle, even pressure until the trim is flush with the ceiling surface.
4. Saugus apipjaustymas: For some installations, additional mounting hardware may be used to further secure the trim. Refer to the specific instructions provided with your housing for details.
5. Atkurti maitinimą: Once the trim is securely installed, restore power at the circuit breaker.
6. Bandymo funkcionalumas: Turn on the light switch to verify proper operation and dimming capabilities.

Image 4.1: Dimensional drawing of the WAC Lighting Aether 2in Round Light Engine Trim. This diagram illustrates the physical measurements of the trim, including its 4 1/8 inch overall diameter and 2 5/8 inch aperture, crucial for proper installation planning.

5. Naudojimo instrukcijos

Standartinis veikimas:

Once installed and power is restored, the Aether LED trim operates like any standard light fixture. Use your wall switch to turn the light on or off.

Pritemdymo funkcija:

This fixture is designed for smooth and continuous dimming down to 1% when used with compatible Electronic Low Voltage (ELV) or 0-10V dimmers. Ensure your dimmer switch is compatible with LED lighting and specifically with ELV or 0-10V systems for optimal performance. Refer to your dimmer's instruction manual for specific operating procedures.

6. Priežiūra

The WAC Lighting Aether LED trim requires minimal maintenance.

• Valymas: Norėdami valyti įrenginį, įsitikinkite, kad jis išjungtas. Naudokite minkštą, sausą arba šiek tiek sudrėkintą šluostę.amp šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių, nes jie gali pažeisti apdailą ar elektrinius komponentus.
• LED Light Engine: The LED light engine is replaceable. If replacement is necessary, ensure power is off and follow the reverse of the installation steps to remove the old engine and install a new, compatible WAC Lighting LED light engine.
• Patikra: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician or WAC Lighting customer support.

7. Problemų sprendimas

If you experience issues with your Aether LED trim, refer to the following common problems and solutions:

8. Techninės specifikacijos

9. Informacija apie garantiją

This WAC Lighting product is covered by a 1477-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official WAC Lighting warranty documentation or contact customer support.

10. Pagalba klientams

For further assistance, technical support, or warranty inquiries, please visit the official WAC Lighting store or contact their customer service department.

WAC Lighting Store: Visit WAC Lighting on Amazon