Įvadas
This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.
Svarbios saugos instrukcijos
- Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas.
- Išsaugokite šį vadovą ateityje.
- Šis gaminys skirtas naudoti tik patalpose (IP20 apsaugos klasė). Saugokite nuo drėgmės ar ekstremalių temperatūrų.
- Prieš bet kokius montavimo ar techninės priežiūros darbus įsitikinkite, kad maitinimo šaltinis yra atjungtas.
- Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
- Do not attempt to open or modify the controller or remote control. This will void the warranty.
- Baterijas laikykite vaikams nepasiekiamoje vietoje. Panaudotas baterijas utilizuokite atsakingai.
Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi komponentai:
- 1x Paulmann MaxLED RGBW Controller (Model 79797)
- 1x belaidis nuotolinio valdymo pultas
- 1x Assembly Instructions (this manual)
Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.
Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.
Sąranka ir diegimas
Follow these steps for proper installation of your MaxLED RGBW Controller:
- Paruoškite montavimo vietą: Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
- Prijunkite LED juostelę: Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
- Prijunkite maitinimo šaltinį: Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
- Sumontuokite valdiklį: The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
- Maitinimas: Once all connections are secure, plug the power supply into a suitable electrical outlet.
- Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.
Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.
Naudojimo instrukcijos
The wireless remote control allows full command over your MaxLED RGBW strips.
Nuotolinio valdymo pulto funkcijos:
Paveikslėlis: detalus view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.
- Įjungimo mygtukas (O): Press to turn the LED strips On or Off.
- Ryškumo valdymas (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
- Spalvų ratas: Touch the color wheel to select a desired static color for your LED strips.
- Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
- Speed Control (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.
Nuotolinio valdymo pulto susiejimas:
If your remote control is not responding, it may need to be paired with the controller:
- Įsitikinkite, kad valdiklis įjungtas.
- Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
- The LED strips should flash to indicate successful pairing.
Priežiūra
Valymas:
To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.
Nuotolinio valdymo pulto baterijos keitimas:
The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:
- Nuotolinio valdymo pulto gale raskite baterijų skyrių.
- Open the compartment using a small screwdriver or by sliding the cover.
- Išimkite seną bateriją ir įdėkite naują, užtikrindami teisingą poliškumą (+/-).
- Saugiai uždarykite akumuliatoriaus skyrių.
- Išmeskite seną bateriją laikydamiesi vietinių taisyklių.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| LED strips do not light up. | No power, loose connection, faulty power supply, remote not paired. | Check power supply connection. Ensure all cables are securely plugged in. Verify power outlet is functional. Re-pair the remote control (see Operating Instructions). |
| Nuotolinio valdymo pultas nereaguoja. | Dead battery, remote not paired, out of range. | Replace remote control battery. Re-pair the remote control. Move closer to the controller (within 30m). |
| Spalvos yra neteisingos arba nenuoseklios. | Loose connection to LED strip, faulty LED strip. | Check the connection between the controller and the LED strip. Ensure the strip is fully compatible. |
| Dimming or effects not working. | Remote control issue, incompatible LED strip. | Ensure the remote control battery is good and it is paired. Verify the LED strip is an RGBW dimmable type. |
Specifikacijos
| Prekės ženklas | Paulmannas |
| Modelio numeris | 79797 |
| Gaminio matmenys (I x P x A) | 5.3 x 11 x 2 cm (Controller); 20 x 110 x 53 mm (Remote) |
| Svoris | 102 gramų |
| IP reitingas | IP20 (naudoti tik patalpose) |
| Medžiaga | Plastikiniai |
| Maks. Vattage | 144 vatų |
| ttage | 24 voltų |
| Šviesos šaltinio tipas | LED (for compatible strips) |
| Maitinimo šaltinis | AC (via external 24V power supply) |
| Ypatingos savybės | Dimmable, Variable Intensity, Remote Control, RGBW Color Change |
| Nuotolinio valdymo dažnis | 2.4 GHz RF |
| Nuotolinio valdymo pulto diapazonas | Up to 30 meters (non-line-of-sight) |
| Reikalingos baterijos (nuotolinio valdymo pultui) | Taip (neįtraukta) |
Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.
Garantija ir palaikymas
Garantija:
Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann websvetainėje arba susisiekite su savo pardavėju.
Klientų aptarnavimas:
For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann websvetainę.
Paulmannas Websvetainė: www.paulmann.com
