Plugable HDMI Video Capture Card (USBC-CAP60) Instruction Manual

1. Įvadas

The Plugable HDMI Video Capture Card (USBC-CAP60) is designed for high-quality video capture and streaming. It supports recording and live streaming at 1080p resolution and 60 frames per second, featuring an HDMI pass-through for zero-latency monitoring. This device is compatible with a wide range of operating systems including Windows, macOS, and Linux, and integrates seamlessly with popular streaming software like OBS, Streamlabs OBS, and Xsplit. It is an ideal solution for capturing gameplay, presentations, or any HDMI video source.

Image: The Plugable HDMI Video Capture Card, highlighting its USB 3.0 and USB-C connectivity for recording and streaming live content.

2. Sąranka

Follow these steps to set up your Plugable HDMI Video Capture Card:

1. Prijunkite vaizdo įrašo šaltinį: Connect your HDMI video source (e.g., game console, DSLR camera, camcorder) to the HDMI-IN port on the capture card using an HDMI cable.
2. Prijungti ekraną (neprivaloma): For real-time monitoring without latency, connect a display (e.g., TV, monitor) to the HDMI OUT port on the capture card using another HDMI cable.
3. Prisijunkite prie kompiuterio: Connect the capture card to your computer using either the provided USB 3.0 (USB-A to USB-A) or USB-C (USB-C to USB-A) cable. The card is plug-and-play and typically does not require additional drivers for Windows, macOS, or Linux.
4. Programinės įrangos konfigūracija: Open your preferred streaming or recording software (e.g., OBS Studio, Streamlabs OBS, Xsplit). Add the capture card as a video source. It will usually appear as "FHD Capture" or a similar device name.

Image: The Plugable NIX Capture Card connected to a laptop via USB and an external monitor via HDMI pass-through, illustrating a typical setup.

3. Naudojimo instrukcijos

The Plugable HDMI Video Capture Card is designed for ease of use with various applications:

• Srautinio perdavimo programinė įranga: Once connected, the capture card will appear as a webcam or video input device in applications like OBS Studio, Streamlabs OBS, Xsplit, Zoom, and Google Meet. Select it as your video source to begin streaming or recording.
• Rezoliucija ir kadrų dažnis: The card supports up to 1080p at 60 frames per second. Ensure your software settings match these capabilities for optimal performance.
• HDMI praėjimas: Utilize the HDMI OUT port to connect to a separate display for real-time, zero-latency monitoring of your video source while capturing or streaming.
• HDCP turinys: Svarbi pastaba: This capture card does not support recording from HDCP-enabled sources. This includes most Blu-ray players, set-top boxes, older consoles with HDMI output (e.g., PlayStation 3, Xbox 360), and streaming devices. For PlayStation 4, HDCP must be manually disabled in its system settings to allow capture. Attempting to capture HDCP-protected content will result in a blank screen.

Image: The Plugable NIX Capture Card shown with logos of compatible platforms like OBS, Zoom, and Google Meet.

4. Priežiūra

To ensure the longevity and optimal performance of your capture card:

• Valymas: Use a soft, dry cloth to clean the exterior of the device. Avoid liquid cleaners or solvents.
• Saugykla: Laikykite prietaisą vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Tvarkymas: Handle the device with care to prevent physical damage to ports or the casing.

5. Problemų sprendimas

If you encounter issues with your Plugable HDMI Video Capture Card, refer to the following common solutions:

• Nėra vaizdo signalo:
  • Ensure all HDMI and USB cables are securely connected.
  • Verify that your video source is powered on and outputting a signal.
  • Check for HDCP protection on your source device. If the source is HDCP-protected, the capture card will not display video. Disable HDCP on your source if possible (e.g., PlayStation 4 settings).
  • Try a different HDMI cable or USB port on your computer.
• Garso sinchronizavimo problemos:
  • Some streaming software may require manual adjustment of audio delay. Refer to your software's documentation for specific settings.
  • Ensure your audio output settings in your streaming software are correctly configured to use the capture card's audio.
• Įrenginys neatpažintas:
  • Try connecting the capture card to a different USB 3.0 or USB-C port on your computer.
  • Iš naujo paleiskite kompiuterį ir bandykite dar kartą.
  • Įsitikinkite, kad jūsų operacinė sistema yra atnaujinta.
• Compatibility with iOS Devices:
  • The capture card may not function correctly with iOS devices using AV Lightning cables due to HDCP restrictions inherent in Apple's ecosystem.

6. Specifikacijos

7. Garantija ir palaikymas

Plugable products are backed by a 2 metų ribota garantija. For technical assistance or warranty claims, please visit the official Plugable support website or contact their customer service. Plugable offers North American lifetime support from their engineering team.

Norėdami gauti daugiau informacijos, apsilankykite: Prijungiamas palaikymas