„Fluance RT85“ patefono naudotojo vadovas

Įvadas

The Fluance RT85 Turntable is designed to deliver a pure analog listening experience with exceptional musical accuracy. Featuring an Ortofon 2M Blue elliptical cartridge, a high-density acrylic platter, and precise speed control, this turntable ensures high-fidelity audio reproduction. Its high-mass MDF wood plinth and vibration isolation feet provide superior stability and sound clarity.

Image: Fluance RT85 Turntable in Piano Black, showcasing its elegant design and high-quality components.

Kas įtraukta

Your Fluance RT85 Turntable package includes the following components:

• Plinth (Turntable Base)
• Acrylic Platter
• Guminis diržas
• Headshell & Ortofon 2M Blue Cartridge
• Dust Cover & 2 Hinges
• 3ft Ground Cable
• 3ft RCA Cables
• Cotton Gloves (for handling components)
• Variklio skriemulio dangtis
• 45 adapteris
• Atsvara
• Burbulo lygis
• 5ft Power Adapter
• Vartotojo vadovas (šis dokumentas)

Image: A visual representation of all items included in the Fluance RT85 Turntable package.

Sąranka

Follow these steps to set up your Fluance RT85 Turntable for optimal performance.

1. Išpakavimas ir pradinis išdėstymas

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and vibrations.

2. Plokštelės ir diržo montavimas

1. Place the acrylic platter onto the spindle in the center of the turntable.
2. Place the motor pulley cap over the motor pulley. Ensure it locks into place.
3. Lift the rubber belt, which is pre-installed around the platter, and carefully place it around the motor pulley.
4. Rotate the platter a few times clockwise to ensure the belt is properly seated.

Vaizdas: Iš viršaus į apačią view of the Fluance RT85 turntable with the acrylic platter and drive belt in place.

3. Counterweight and Headshell Installation

1. Ensure the tonearm is locked in its rest.
2. Slide the counterweight onto the end of the tonearm with the numbers facing forward.
3. Install the headshell (with the Ortofon 2M Blue Cartridge pre-attached) onto the tonearm and tighten the locking nut until it is secure.

Vaizdas: Išsamus view of the Ortofon 2M Blue elliptical cartridge, highlighting its precision.

4. Leveling the Turntable

Use the included bubble level to ensure the turntable is perfectly level. Adjust the turntable's adjustable feet as needed until the bubble is centered.

Image: The high-mass MDF wood plinth and adjustable sound isolation feet of the Fluance RT85.

5. Balancing the Tonearm and Setting Tracking Force

1. Nuimkite rašiklio apsaugą.
2. Unlock the tonearm, lift the cueing lever, and position the tonearm over the platter.
3. Hold the headshell and gently lower the cueing lever completely. Do not let the stylus touch the platter.
4. Turn the counterweight until the tonearm is balanced and floats horizontally when released.
5. Move only the counterweight indicator ring to zero (without turning the entire counterweight).
6. Rotate the entire counterweight until the ring is set to the recommended tracking force for the Ortofon 2M Blue cartridge, which is 1.8 gramų.
7. Adjust the anti-skating dial to the same number as the tracking force (1.8).

6. Dulkių dangtelio montavimas

Attach the hinges to the dust cover, then carefully install the dust cover onto the turntable.

7. Prisijungimas prie AmpGyvesnis/imtuvas

The Fluance RT85 does not have a built-in phono preamp. You will need an external phono preamp arba an amplifier/receiver with a dedicated phono input.

• Connect the RCA cables from the turntable's audio output to the phono input on your receiver/preamp.
• Connect the ground wire from the turntable to the grounding post on your receiver/preamp to minimize hum.

For a visual guide on setup, please watch the official Fluance setup video:

Naudojimo instrukcijos

Once your turntable is set up, follow these steps to play your vinyl records.

1. Place a record on the acrylic platter.
2. Select the desired speed (33 1/3 RPM or 45 RPM) using the speed selector knob. For 45 RPM records, place the 45 adapter on the spindle if the record has a large center hole.
3. Švelniai pakelkite tonarmą naudodami tonarmo svirtį.
4. Uždėkite tonarmą virš norimo plokštelės pradinio griovelio.
5. Slowly lower the cueing lever to allow the stylus to gently descend onto the record.
6. At the end of the record, the auto-stop feature will stop the platter rotation. Lift the tonearm and return it to its rest.

Už pabaigąview of the Fluance Reference Series turntables, watch this video:

Priežiūra

Proper maintenance will ensure the longevity and optimal performance of your turntable.

• Apsauga nuo dulkių: Keep the dust cover closed when not in use to protect the turntable from dust and debris. Clean with a soft, dry cloth.
• Rašiklis: Reguliariai švelniai valykite rašiklį minkštu šepetėliu, skirtu rašiklių valymui, braukdami iš galo į priekį.
• Platter and Plinth: Wipe the acrylic platter and MDF wood plinth with a soft, lint-free cloth. Avoid abrasive cleaners.
• Diržas: Inspect the drive belt periodically for wear or stretching. Replace if necessary.

Trikčių šalinimas

Jei kyla kokių nors problemų, vadovaukitės šiais įprastais trikčių šalinimo patarimais:

Specifikacijos

• Modelis: RT85T
• Prekinis ženklas: Fluance
• Gaminio matmenys: 13.75 x 16.5 x 5.5 colio
• Prekės svoris: 16.76 svaro
• Medžiaga: MDF mediena
• Lėkštė: High Density Acrylic
• Kasetė: Ortofon 2M Blue elliptical cartridge
• Variklio tipas: AC Motor with Speed Control Mechanism
• Wow/Flutter: 0.07 %
• Ryšio technologija: Laidinis
• Kilmės šalis: Taivanas

Image: Key dimensions of the Fluance RT85 Turntable.

Garantija ir palaikymas

Fluance offers a 2-year manufacturer's direct warranty and lifetime customer support for your RT85 Turntable.

For additional support, FAQs, and international manuals, please visit the official Fluance support page:

Fluance Support Page

Image: QR code and text indicating support resources for Fluance products.