1. Produktas baigtasview
The Moen M84763SRN Genta Widespread Bathroom Faucet is a two-handle widespread bathroom sink faucet designed for modern bathrooms. It features a 1.2 GPM maximum flow rate and includes a pop-up drain assembly. The faucet is equipped with Duralock Technology for easy installation and a Spot Resist Brushed Nickel finish to resist fingerprints and water spots.

Image: Moen Genta 1.2 GPM Widespread Bathroom Faucet in Spot Resist Brushed Nickel. This image displays the faucet installed on a countertop, showcasing its curved edges and sleek design.
2. Saugos informacija
- Always turn off the water supply at the main shut-off valves before beginning any work on the faucet.
- Montuodami dėvėkite apsauginius akinius, kad apsaugotumėte akis.
- Įsitikinkite, kad visos jungtys yra sandarios, kad išvengtumėte nuotėkio, bet neperveržkite.
- Jei abejojate dėl kurio nors žingsnio, kreipkitės į kvalifikuotą santechniką.
3. Pakuotės turinys
Prieš pradėdami montavimą, patikrinkite, ar yra visi komponentai.
- Maišytuvo snapelio surinkimas
- Handle Assemblies (2)
- Montavimo įranga
- Hot and Cold Supply Lines
- Iššokančio drenažo mazgas
- Montavimo instrukcijos
Pastaba: Valve cartridges are typically sold separately for widespread faucets to allow for customization. Please ensure you have the correct valve cartridges for your installation.
4. Reikalingi įrankiai
Diegimui rekomenduojami šie įrankiai:
- Adjustable Wrenches (x2)
- Apsauginiai akiniai
- Phillips Head Screwdriver (long recommended)
- Silikoninis sandariklis
- Žibintuvėlis
- Kibiras
- Rankšluostis
5. Montavimas
This faucet is designed for a 3-hole widespread installation with a minimum of 6 inches and a maximum of 16 inches between the center of the outer holes. Ensure your sink configuration matches these requirements.
Diegimo vaizdo vadovas
For a detailed visual guide on installing a similar 2-handle widespread lavatory faucet, please refer to the video below. While this video features a Delta faucet, the general installation steps for a widespread faucet with traditional valves are applicable.
Video: How To Install Delta 2-Handle Widespread Lav Faucet. This video provides step-by-step instructions for installing a widespread bathroom faucet, covering valve installation, handle placement, spout mounting, and drain assembly.
Step-by-Step Installation Overview:
- Paruoškite montavimo vietą: Turn off the water supply. Clear the area under the sink.
- Install End Valves: Attach the supply lines to the end valves. Ensure the hot and cold sides are correctly identified (hot on the left, cold on the right). Apply silicone sealant if your countertop is irregular.
- Mount End Valves: Insert the end valves into the outer holes of the countertop. Secure them from underneath using the provided mounting hardware. Hand-tighten first, then snug with a Phillips head screwdriver, being careful not to overtighten.
- Rankenų montavimas: Place the handles over the end valves. Ensure they rotate freely and are aligned correctly in the full off position. Tighten the set screws on the handles using the appropriate hex wrench.
- Įdiekite snapelį: Apply a plastic gasket to the base of the spout. Insert the spout into the center hole of the countertop. Secure it from underneath with the mounting bracket and nut, ensuring the spout tube and lift rod have clearance.
- Connect Spout Tubes and Supply Lines: Use the provided spout connector adapter to connect the spout tube to the hot and cold supply lines. Ensure all connections are secure and leak-proof.
- Įdiekite drenažo mazgą: Disassemble the drain assembly, apply silicone sealant to the flange, and insert it into the sink drain hole. Reassemble and tighten the drain body from underneath, ensuring the pivot hole faces the rear.
- Install Pivot Rod and Stopper: Insert the pivot rod into the drain assembly's pivot hole, securing it with the plastic gasket and nut. Connect the lift rod to the pivot rod using the included strap, ensuring smooth operation of the stopper.
- Flush Supply Lines: Before reinstalling the aerator, turn on the hot and cold water supplies one at a time and let water run through the system for about 30 seconds to clear any debris.
- Reinstall Aerator: Gently screw the aerator back into the spout. Use the aerator wrench to snug it into place, but do not overtighten.
6. Naudojimo instrukcijos
The Moen Genta faucet features two handles for precise control over water flow and temperature.
- Vandens srautas: Turn the handles forward to increase water flow and backward to decrease it.
- Temperatūros valdymas: The left handle controls hot water, and the right handle controls cold water. Adjust both handles to achieve your desired water temperature.
- Iššokantis kanalizacija: Use the lift rod located behind the faucet spout to open and close the pop-up drain.
7. Priežiūra
To maintain the Spot Resist Brushed Nickel finish and ensure the longevity of your Moen Genta faucet, follow these cleaning guidelines:
- Reguliarus valymas: Reguliariai valykite minkštu skudurėliu ir šiltu muiluotu vandeniu.
- Venkite griežtų valiklių: Nenaudokite abrazyvinių valiklių, stiprių cheminių medžiagų ar šveitimo kempinėlių, nes jos gali pažeisti apdailą.
- Atsparus dėmėms apdaila: The Spot Resist Brushed Nickel finish is designed to resist fingerprints and water spots, making cleaning easier.
- Aeratoriaus valymas: Periodically remove and clean the aerator to remove mineral deposits and maintain optimal water flow.
8. Problemų sprendimas
Jei kyla problemų dėl maišytuvo, vadovaukitės šiais įprastais trikčių šalinimo patarimais:
- Mažas vandens srautas: Patikrinkite, ar aeratorius neužsikimšęs šiukšlėmis. Jei reikia, išvalykite arba pakeiskite. Įsitikinkite, kad vandens tiekimo vožtuvai yra visiškai atidaryti.
- Nuotėkis: Check all connections for tightness. Ensure O-rings and gaskets are properly seated. If leaks persist from the handles, the valve cartridges may need inspection or replacement.
- Dripping Faucet: A dripping faucet often indicates a worn-out valve cartridge. Replace the cartridge if necessary.
- Stiff Handles: Lubricate the valve stems or replace the cartridges if handles are difficult to turn.
9. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Moen |
| Modelio pavadinimas | Genta |
| Modelio numeris | M84763SRN |
| Aprašymas | Two Handle Widespread Bathroom Sink Faucet |
| Apdailos tipas | Spot Resist Brushed Nickel |
| Medžiaga | Plastic (components) |
| Rankenų skaičius | 2 |
| Skylių skaičius | 3 |
| Diegimo tipas | Plačiai paplitęs |
| Maksimalus srautas | 1.2 galono per minutę (GPM) |
| Snapo pasiekimas | 4.6 colių |
| Prekės svoris | 4.7 svaro |
| Gaminio matmenys | 8 "D x 5" P x 5" A |
| UPC | 026508284940 |
10. Garantija ir palaikymas
The Moen M84763SRN Genta Faucet comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your product or visit the official Moen website. You can also contact Moen customer service directly for assistance.





