Įvadas
Thank you for choosing the Sunco LED Wraparound Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Saugos informacija
- ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.
- Šį gaminį pagal taikomą montavimo kodą turi sumontuoti asmuo, susipažinęs su gaminio konstrukcija ir veikimu bei susijusiais pavojais.
- Užtikrinkite tiekimo tūrįtage suderinamas su šviestuvu (120–277 V).
- Nelieskite laidų, kuriais teka įtampa.
- Nekeiskite įrenginio. Bet kokie pakeitimai gali panaikinti garantiją ir sukelti pavojų saugai.
- Tinka damp vietos.
Pakuotės turinys
Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:
- LED Wraparound Shop Light Fixture (2 units for 2-pack)
- Montavimo įranga
- Linking Cables (for connecting multiple fixtures)
- Instrukcijų vadovas
Specifikacijos
| Modelio numeris | SHW-40W-5K-2PK |
| Energijos suvartojimas | 40 vatų |
| Šviesos išvestis | 3500 liumenų |
| Spalvos temperatūra | 5000K dienos šviesa |
| ttage | 120-277V |
| Matmenys | 48 colio ilgio x 5.35 colių pločio x 2.36 colio aukščio |
| Spindulio kampas | 110 laipsnių |
| CRI | 80+ |
| Diegimo tipas | Flush Mount / Hardwired |
| Ypatingos savybės | Prismatic Lens, Linkable (up to 8 units), Non-Dimmable |
| Sertifikatai | ETL |
Montavimo instrukcijos
This fixture is designed for direct surface mounting to the ceiling. Always ensure power is disconnected before starting installation.
- Paruoškite tvirtinimą: Carefully remove the diffuser (Part B) from the lamp base (Part A) to access the wiring and mounting points.
- Sumontuokite armatūrą: Padėkite lamp base against the ceiling where you intend to install it. Mark the mounting holes. Use appropriate mounting hardware (screws, anchors) to securely attach the lamp base to the ceiling.
- Laidai: Bring the electrical supply wires from the junction box to the fixture. Connect the wires according to local electrical codes: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Ensure all connections are secure with wire nuts.
- Pakeiskite difuzorių: Once wiring is complete and secure, carefully reattach the diffuser to the lamp base. Ensure it snaps firmly into place along both sides.
Linking Multiple Fixtures
These fixtures are linkable, allowing you to connect up to 8 units from a single power source. Use the provided linking cables or flush linking connectors to connect fixtures end-to-end. Ensure the total wattagSusijungusių įrenginių skaičius neviršija grandinės pajėgumo.
Operacija
Once properly installed and powered, the Sunco LED Wraparound Shop Light will provide instant-on, flicker-free illumination. This fixture is non-dimmable and operates at a 5000K Daylight color temperature, designed to mimic natural daylight for enhanced visibility and alertness.
Priežiūra
The Sunco LED Wraparound Shop Light is designed for long-lasting performance with minimal maintenance. The integrated LED design means there are no bulbs to replace.
- Valymas: Ensure power is off before cleaning. Wipe the fixture and diffuser with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
- Patikra: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Sunco Lighting support.
Trikčių šalinimas
If you experience issues with your Sunco LED Wraparound Shop Light, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia | Nėra maitinimo šaltinio; Atsilaisvinę laidai; Sugedęs šviestuvas. | Check circuit breaker/fuse. Ensure all wire connections are secure. If problem persists, contact Sunco support. |
| Šviesa silpna arba mirga | Incompatible dimmer switch (fixture is non-dimmable); Loose wiring; Power fluctuation; Fixture nearing end of life. | Ensure no dimmer switch is used. Check wiring connections. If dimming occurs after extended use (e.g., 1.5-2 years), it may indicate a component issue. Contact Sunco support for warranty assistance. |
| Only some linked lights are working | Loose linking cable connection; Faulty individual fixture in the chain. | Check all linking cable connections. Isolate the non-working fixture to determine if it's an individual unit issue. |
Jei trikčių šalinimo veiksmai neišsprendžia problemos, susisiekite su „Sunco Lighting“ klientų aptarnavimo tarnyba.
Garantija ir palaikymas
Sunco Lighting stands behind the quality of its products. This LED Wraparound Shop Light comes with a 7 metų apsauga warranty. For warranty claims, technical assistance, or any questions regarding your product, please contact our knowledgeable support specialists.
Kontaktinė informacija: Please refer to the Sunco Lighting webNaujausią kontaktinę informaciją rasite svetainėje arba pirkimo dokumentuose.
