„Sunco“ apšvietimas DL_SL6-14W

Sunco Lighting 6-Inch Ultra-Thin LED Recessed Light Manual

Modelis: DL_SL6-14W

Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Sunco Lighting 6-Inch Ultra-Thin LED Recessed Ceiling Lights. These 14W, 5000K Daylight fixtures are designed for easy installation without a can, featuring a wafer-thin profile and an integrated junction box. They offer seamless dimming capabilities and are IC rated for direct contact with insulation.

Saugos informacija

Kas yra dėžutėje

Kiekvienoje pakuotėje yra šie komponentai:

Specifikacijos

FunkcijaDetalė
Modelio numerisDL_SL6-14W
Dydis6 colio
Spalvos temperatūra5000K dienos šviesa
Vattage14 vatų
Ryškumas850 liumenų
ttage120 voltų
PritemdomasTaip (10%-100%)
MedžiagaPolycarbonate, Copper Wiring
Naudojimas viduje / laukeVidinis
SertifikataiEnergy Star, ETL (5005842), FCC (L10), RoHS
Prekės svoris0.01 uncijos (už vienetą)
Gaminio matmenys7 x 1 x 7 colio

Note: Efficiency is approximately 61 lumens per watt.

Diagram showing the dimensions of the 6-inch ultra-thin LED recessed light and its separate junction box.

Image: Detailed dimensions of the light fixture and junction box.

Sąranka ir diegimas

These ultra-thin LED recessed lights are designed for easy, canless installation. Follow these steps for proper setup:

Reikalingi įrankiai:

Diegimo žingsniai:

  1. Išjunkite maitinimą: Before starting, ensure the power to the installation area is turned off at the circuit breaker to prevent electrical shock.
  2. Iškirpkite skylę lubose: Use a hole saw to cut a 6-inch diameter hole in the desired ceiling location. Ensure there are no obstructions (e.g., joists, pipes) behind the ceiling.
  3. Prijunkite laidus: Open the junction box. Connect the house electrical wires to the fixture wires using the provided wire nuts:
    • Black (Live) to Black (Fixture)
    • White (Neutral) to White (Fixture)
    • Green or Bare Copper (Ground) to Green (Fixture)
    Saugiai uždarykite jungiamąją dėžę.
  4. Įdėkite skirstomąją dėžutę: Insert the junction box into the ceiling hole. The compact design allows it to sit above the ceiling.
  5. Šviestuvo įrengimas: Connect the light fixture to the junction box cable. Fold the spring-loaded clips on the side of the light fixture upwards and push the fixture into the ceiling hole. The clips will automatically snap down and hold the fixture securely in place.
  6. Bandymo lemputė: Atkurkite elektros srovę automatiniu jungikliu ir patikrinkite šviestuvą.
Diagram showing the installation of a recessed light with junction box and spring clips

Image: Installation diagram showing the junction box connected to house wiring and the light fixture with spring clips.

Vaizdo įrašas: Viršijimasview of Sunco Lighting's commitment to quality and customer service, including product testing and design.

Naudojimo instrukcijos

Your Sunco Lighting LED recessed lights are designed for simple operation and enhanced functionality.

Maitinimo įjungimas/išjungimas:

Operate the lights using a standard wall switch connected to the circuit. Flip the switch to turn the lights on or off.

Pritemdymo funkcija:

These LED fixtures are fully dimmable from 10% to 100%. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on the circuit. Adjust the dimmer switch to achieve your desired brightness level.

Image showing a room with recessed lights, split into two halves: one dark with lights at 10% brightness, and one bright with lights at 100% brightness, with a dimmer switch graphic.

Image: Visual representation of the smooth dimming capability from 10% to 100%.

Priežiūra

The Sunco Lighting LED recessed lights require minimal maintenance.

Trikčių šalinimas

If you encounter issues with your LED recessed lights, refer to the following common problems and solutions:

ProblemaGalima priežastisSprendimas
Šviesa neįsijungia.No power, loose wiring, faulty switch, or faulty fixture.Check circuit breaker. Verify all wire connections are secure. Test the switch. If issues persist, contact support.
Šviesa mirga arba pritemsta netolygiai.Incompatible dimmer switch, loose wiring, or voltage svyravimai.Ensure a compatible LED dimmer switch is used. Check wiring connections. Consult an electrician for voltage klausimus.
Šviesa nėra tokia ryški, kaip tikėtasi.Dimmer setting too low, or incorrect light placement.Adjust dimmer to 100%. Consider adding more fixtures for larger areas if needed.

Informacija apie garantiją

„Sunco Lighting“ teikia 7 metų apsauga warranty for this product. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Sunco Lighting customer support.

Papildomus apsaugos planus galima įsigyti iš įgaliotųjų mažmenininkų.

Palaikymas

For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable specialists are available to assist you.

Apsilankykite oficialioje „Sunco Lighting“ svetainėje webkontaktinę informaciją ir papildomus išteklius rasite svetainėje: www.suncolighting.com