„Simplex 4100-2302“ 8 lizdų išplėtimo skyriaus užpildymo skydelio naudotojo vadovas

1. Įvadas

This document provides instructions for the installation and maintenance of the Simplex 4100-2302 8 Slot Expansion Bay Filler Panel. This panel is designed to cover unused expansion bay openings in Simplex 4100U or 4100ES Dress Panels, ensuring proper system integrity and aesthetics.

1.1 paveikslas: The Simplex 4100-2302 8 Slot Expansion Bay Filler Panel. This image displays the front view of the black, rectangular filler panel, which is used to cover empty slots in a control panel.

2. Sąranka

Before beginning installation, ensure all necessary tools are available and that the system is powered down to prevent accidental activation or damage. Verify that the installation environment is clean and free of debris.

3. Montavimas

Follow these steps to properly install the Simplex 4100-2302 8 Slot Expansion Bay Filler Panel:

Paruošimas: Ensure the Simplex 4100U or 4100ES Dress Panel is open and the bay where the filler panel will be installed is accessible and clear.
Padėties nustatymas: Attach the Filler Panel to the inside of the Dress Panel. Align the panel with the existing studs within the bay opening.
Apsauga: Secure the panel using the four (4) gauge nuts provided. Ensure the brackets located on the Filler Panel are positioned at the bottom, and the textured side of the panel faces the outside of the Dress Panel. Refer to Figure 3.1 for visual guidance.

Simplex 4100U/4100ES Filler Panel Installation Instruction Diagram

3.1 paveikslas: Installation diagram for the Simplex 4100U/4100ES Filler Panel. This diagram illustrates how the filler panel attaches to the inside of the dress panel, showing the alignment with studs and the placement of gauge nuts.

4. Naudojimo instrukcijos

The Simplex 4100-2302 8 Slot Expansion Bay Filler Panel is a passive component designed to cover unused bay openings. It does not require operational procedures once correctly installed. Its function is purely structural and aesthetic.

5. Priežiūra

The filler panel requires minimal maintenance. Periodically inspect the panel for secure attachment and any signs of damage or wear. Clean the surface with a soft, dry cloth if dust or debris accumulates. Avoid using abrasive cleaners or solvents that could damage the panel's finish.

6. Problemų sprendimas

If the filler panel does not fit correctly or becomes loose, consider the following:

Netinkamas pritaikymas: Verify that the panel is properly aligned with the mounting studs within the bay. Ensure the correct panel model (4100-2302) is being used for the specific Simplex 4100U or 4100ES Dress Panel.
Loose Panel: Check that the four (4) gauge nuts are securely fastened. Over-tightening is not necessary, but they should be snug to prevent movement.
Žala: Inspect the panel for any physical damage that might prevent proper installation or secure fitting.

7. Specifikacijos

Prekės ženklas	PAPRASTAS
Modelio numeris	4100-2302
Dalies numeris	S41002302 (also referenced as 0743807)
Aprašymas	8 Slot Expansion Bay Filler Panel
Prekės svoris	1 svaras
Prekės pakuotės kiekis	1
UPC	734038306154

7.1 paveikslas: Product identification label for the Simplex 4100-2302. This label shows the PID, description, quantity, part number (0743807), and country of manufacture (Mexico).

7.2 paveikslas: The Simplex 4100-2302 Filler Panel as received in its protective packaging. The image shows the panel enclosed in a yellow envelope, with a product label visible on the outside.

8. Garantija ir palaikymas

Specific warranty details for the Simplex 4100-2302 8 Slot Expansion Bay Filler Panel are not provided in this document. For comprehensive warranty information, technical support, or to inquire about replacement parts, please contact your authorized Simplex distributor or visit the official Simplex website. Always refer to the latest documentation provided by Simplex for the most current information.

	Simplex SPS/RPS įrengimo instrukcijos „Simplex 4100“ serijos sistemos maitinimo šaltinių (SPS) ir nuotolinių maitinimo šaltinių (RPS) įrengimo instrukcijos, kuriose išsamiai aprašomas gaisro signalizacijos sistemų nustatymas, laidų sujungimas, konfigūracija ir trikčių šalinimas.
	Simplex SPS/RPS įrengimo instrukcijos This document provides detailed installation instructions for Simplex SPS (System Power Supplies) and RPS (Remote Power Supplies), covering models 4100-5111, 4100-5112, 4100-5125, 4100-5126, 4100-5113, and 4100-5127. It includes information on wiring, mounting, configuration, and troubleshooting for these fire alarm control panel components.
	„Simplex“ skaitmeninių / analoginių garso valdiklių diegimo instrukcijos „Simplex 4100-1210“ analoginio garso valdiklio, „4100-1211“ skaitmeninio garso valdiklio ir „4100-1311“ skaitmeninio garso valdiklio įrengimo instrukcijos. Apima gaisro signalizacijos sistemų specifikacijas, konfigūraciją, laidyną ir trikčių šalinimą.
	„Simplex“ katalogas 2023: Priešgaisrinės signalizacijos valdymo įrenginiai ir sistemos Peržiūrėkite išsamų „Simplex“ 2023 m. katalogą, kuriame rasite platų pažangių gaisro signalizacijos valdymo blokų, inicijavimo įtaisų, pranešimų prietaisų ir tinklo sprendimų asortimentą iš „Johnson Controls“.
	Simplex 4002 Field Wiring Diagrams and Technical Reference Technical reference manual and field wiring diagrams for the Simplex 4002 Fire Alarm Control Panel (FACP), detailing various configurations, module connections, and system layouts.
	„Simplex 4100“ gaisro indikatorių skydelio naudotojo vadovas Šiame naudotojo vadove pateikiamos išsamios „Simplex 4100“ gaisro indikatorių skydelio (FIP) instrukcijos, apimančios jo veikimą, bandymą, priežiūrą ir sistemos funkcijas. Jis skirtas naudotojams ir technikams, valdantiems gaisro signalizacijos sistemas, ir jame išsamiai aprašoma, kaip reaguoti į pavojaus signalus, gedimus ir atlikti įprastinius patikrinimus.