GRACO 202577 cinkuoto plieno Z formos šarnyrinis jungtis 1/4-18 NPT naudojimo instrukcija

1. Produktas baigtasview

The GRACO 202577 Z-Swivel is a zinc-plated steel component designed for use in various industrial fluid transfer applications. This Z-swivel features a 1/4-18 NPT connection, allowing for flexible movement and reduced hose stress in high-pressure systems. Constructed from durable carbon steel, it is engineered to withstand demanding operational environments.

Image of the Graco 202577 Zinc Plated Steel Z-Swivel, showing its three articulating joints and threaded NPT connections.

1 paveikslas: The Graco 202577 Z-Swivel. This image displays the Graco 202577 Z-Swivel, a zinc-plated steel component designed for fluid transfer systems. It features a male NPT threaded end, two central swivel joints allowing for multi-directional movement, and a female NPT threaded end. The swivel is constructed from carbon steel and is rated for a maximum working pressure of 6500 PSI (450 bar).

2. Saugos informacija

Adherence to safety guidelines is crucial during the installation, operation, and maintenance of this product. Failure to follow these instructions may result in equipment damage, personal injury, or property damage.

Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling or working near the swivel.
Ensure that the system pressure does not exceed the maximum working pressure of 6500 PSI (450 bar) specified for this swivel.
Verify that all connections are securely tightened to prevent leaks.
Do not attempt to disassemble or repair the swivel while it is under pressure. Depressurize the system completely before any service.
Inspect the swivel regularly for signs of wear, damage, or corrosion. Replace damaged components immediately.
Use only compatible fluids and components with the swivel.

3. Sąranka ir diegimas

Proper installation ensures optimal performance and longevity of the Z-swivel.

Patikrinkite komponentus: Before installation, carefully inspect the GRACO 202577 Z-Swivel for any visible damage or manufacturing defects. Ensure the threads are clean and free of debris.
Paruoškite jungtis: Identify the male and female 1/4-18 NPT connections on your system. Apply an appropriate thread sealant (e.g., PTFE tape or pipe thread compound) to the male NPT threads of the swivel.
Attach Swivel: Thread the male end of the swivel into the female port of your hose or equipment. Hand-tighten first, then use a wrench to tighten securely. Avoid over-tightening, which can damage threads.
Prijunkite likusius komponentus: Attach the other hose or component to the female end of the swivel, following the same procedure for thread sealant and tightening.
Sistemos patikrinimas: Once installed, slowly pressurize the system and carefully check all connections for leaks. Address any leaks immediately by re-tightening or re-applying thread sealant.

4. Naudojimo instrukcijos

The GRACO 202577 Z-Swivel is designed to provide multi-directional rotation, reducing torque and stress on hoses and connections in dynamic applications.

The swivel allows for 360-degree rotation at each of its two pivot points, enabling flexible positioning of connected hoses or equipment.
Ensure that the swivel is not subjected to bending or side loads beyond its design capabilities. The swivel is intended to relieve torsional stress, not to support heavy loads.
Operate the system within the specified maximum working pressure of 6500 PSI (450 bar). Exceeding this pressure can lead to failure.
Monitor the swivel during operation for any unusual noises, vibrations, or restricted movement, which may indicate a problem.

5. Priežiūra

Regular maintenance helps ensure the reliable performance and extends the lifespan of your GRACO 202577 Z-Swivel.

Vizuali apžiūra: Periodically inspect the swivel for signs of wear, corrosion, cracks, or deformation. Pay close attention to the swivel joints and threaded connections.
Švara: Keep the swivel clean and free from dirt, grime, and corrosive substances. Wipe down the exterior with a clean cloth as needed.
Tepimas: While the swivel is designed for low maintenance, in certain harsh environments, a light application of a compatible lubricant to the swivel points may help maintain smooth operation. Consult Graco for specific recommendations if needed.
Nuotėkių patikrinimai: Regularly check for leaks at the threaded connections, especially after periods of high pressure or temperature fluctuations.
Pakeitimas: If any part of the swivel shows significant wear, damage, or restricted movement, replace the entire swivel unit with a genuine GRACO replacement part. Do not attempt to repair internal components.

6. Problemų sprendimas

This section addresses common issues that may arise during the use of the GRACO 202577 Z-Swivel.

Problema	Galima priežastis	Sprendimas
Nuotėkis jungtyse	Improperly tightened connections, damaged threads, insufficient thread sealant.	Depressurize system. Re-tighten connections. If leak persists, disassemble, inspect threads for damage, re-apply thread sealant, and reassemble. Replace if threads are damaged.
Restricted swivel movement	Accumulation of dirt/debris, internal wear, excessive side loading.	Depressurize system. Clean exterior of swivel. Check for external obstructions. If movement remains restricted, the swivel may be worn internally and requires replacement. Ensure proper application to avoid side loading.
Neįprastas triukšmas veikimo metu	Internal wear, cavitation, foreign material inside the swivel.	Depressurize system. Inspect for external damage. If noise persists, the swivel may be failing internally and requires replacement. Ensure fluid compatibility and proper system design to prevent cavitation.
Visible damage (cracks, deformation)	Over-pressurization, impact, material fatigue.	Immediately depressurize the system and replace the swivel. Do not operate with damaged components.

7. Specifikacijos

Atributas	Detalė
Modelio numeris	202577
Prekės ženklas	Graco
Medžiaga	Anglies plienas
Baigti	Padengta cinku
Ryšio tipas	1/4-18 NPT (National Pipe Taper)
Maksimalus darbinis slėgis	6500 PSI (450 bar)
Prekės svoris	12.8 uncijos
Pakuotės matmenys	6.14 x 4.25 x 0.98 colio
Įtraukti komponentai	GRACO 202577 - Zinc Plated Steel Z-Swivel 1/4-18 NPT

8. Garantija ir palaikymas

For information regarding product warranty, technical support, or to purchase genuine Graco replacement parts, please refer to the official Graco website or contact Graco customer service directly. Always use genuine Graco parts to ensure compatibility and maintain product performance and warranty validity.

You can visit the official Graco Store for more information: „Graco“ parduotuvė

	„Graco Ascent“ vaiko apsaugos priemonių tinkamumo transporto priemonėms sąrašas Išsamus „Graco Ascent“ vaiko apsaugos sistemos suderinamumo transporto priemonėse ir tvirtinimo padėčių vadovas, užtikrinantis saugų ir teisingą montavimą.
	„Graco Extend“ vaiko apsaugos priemonė: naudotojo vadovas ir montavimo vadovas Sužinokite, kaip saugiai sumontuoti ir naudoti „Graco Extend“ vaiko apsaugos sistemą, naudodamiesi šiuo išsamiu naudotojo vadovu. Jame yra montavimo vadovai ir svarbi saugos informacija jūsų vaiko apsaugai.
	„Graco 4EVER DLX Extend2Fit 4-in-1“ automobilinė kėdutė: naudojimo instrukcija ir saugos vadovas Išsami „Graco 4EVER DLX Extend2Fit 4-in-1“ automobilinės kėdutės naudojimo instrukcija. Sužinokite apie montavimą, saugos funkcijas, naudojimo režimus (atsukta į galą, į priekį, paaukštinimas) ir priežiūros instrukcijas, kad užtikrintumėte savo vaiko saugumą.
	„Graco Extend LX R129“ vaiko apsaugos sistema: transporto priemonės montavimo vadovas Find out which vehicles are compatible with the Graco Extend LX R129 child restraint system. This comprehensive guide provides detailed fitting information for rearward and forward-facing modes across numerous car makes and models.
	Graco Turn2Me Grow i-Size R129 Child Restraint: Vehicle Fitting Guide Comprehensive vehicle compatibility list for the Graco Turn2Me Grow i-Size R129 child restraint system. Find fitting information for ISOFIX and 3-point belt installations across numerous car models.
	„Graco Ready2Grow“ vežimėlio naudotojo vadovas ir surinkimo vadovas Išsamus „Graco Ready2Grow“ vežimėlio naudotojo vadovas ir surinkimo vadovas, kuriame pateikiami išsamūs saugos įspėjimai, naudojimo instrukcijos, dalių sąrašas ir „Graco Ready2Grow“ kelionių sistemos priežiūros patarimai.

Graco 202577