1. Produktas baigtasview
The WAGO 284-681 is a 3-conductor through terminal block designed for reliable electrical connections. This terminal block facilitates secure wiring within control cabinets and industrial applications, offering a compact and efficient solution for distributing electrical potential.
Key features include its DIN rail mount compatibility and screw-type connection, ensuring robust and stable installations.
1 pav.: Skerspjūvis view of the WAGO 284-681 3-Conductor Through Terminal Block, showing the internal spring clamp mechanism and conductor pathways. The grey housing encases the metallic current bar and the spring-loaded clamping units for secure wire termination.
2. Saugos informacija
Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.
- Montuoti turi tik kvalifikuotas personalas.
- Ensure power is disconnected before working on electrical circuits.
- Naudokite tinkamas asmenines apsaugos priemones (AAP).
- Verify correct wire gauge and insulation for the application.
- Neviršykite nurodyto tūriotagGnybtų bloko e ir srovės vardinės vertės.
- Inspect terminal blocks for damage before installation. Do not use damaged products.
3. Sąranka ir diegimas
The WAGO 284-681 terminal block is designed for DIN rail mounting. Follow these steps for proper installation:
- Montavimas ant DIN bėgio:
Align the terminal block with the DIN rail. Press the block firmly onto the rail until it clicks into place. Ensure it is securely seated and does not wobble.
- Vielos paruošimas:
Strip approximately 9-10 mm (0.35-0.39 inches) of insulation from the conductor ends. Ensure the conductor strands are not damaged during stripping.
- Conductor Connection (Screw Type):
Insert the prepared conductor into the designated clamping unit. Use an appropriate screwdriver to tighten the screw firmly. Ensure the conductor is fully seated and the screw is tightened to the recommended torque (refer to technical specifications for exact values, typically found on product packaging or WAGO's official documentation). Gently pull on the wire to confirm a secure connection.
- Testavimas:
After all connections are made, perform continuity and insulation resistance tests to verify proper wiring and prevent short circuits.
4. Naudojimo instrukcijos
Once installed and wired, the WAGO 284-681 terminal block functions as a passive component for electrical distribution. No active operation is required beyond ensuring proper connections and adherence to electrical safety standards.
- ttage ir dabartinė: Įsitikinkite, kad taikomas ttage and current do not exceed the maximum ratings specified for the terminal block.
- Aplinkos sąlygos: Operate the terminal block within its specified environmental conditions (temperature, humidity) to ensure optimal performance and longevity.
5. Priežiūra
The WAGO 284-681 terminal block is designed for maintenance-free operation under normal conditions. However, periodic inspection is recommended to ensure continued reliability.
- Vizuali apžiūra: Periodically inspect the terminal blocks for any signs of physical damage, discoloration, or loose connections.
- Ryšio vientisumas: If accessible and safe to do so (with power disconnected), gently check the tightness of screw connections, especially in environments subject to vibration or significant temperature fluctuations.
- Valymas: If necessary, clean the exterior of the terminal block with a dry, lint-free cloth. Do not use solvents or abrasive cleaners.
6. Problemų sprendimas
Most issues related to terminal blocks stem from improper installation or exceeding operational limits. Refer to the following common issues and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Loose connection / Intermittent contact | Insufficient tightening of screw; improper wire stripping; wire pull-out. | Disconnect power. Re-strip wire if necessary. Re-insert and tighten screw to recommended torque. Verify connection by gently pulling the wire. |
| Overheating / Discoloration | Overcurrent; loose connection; environmental factors. | Disconnect power immediately. Check circuit for overcurrent conditions. Inspect connections for looseness. Ensure ambient temperature is within specified limits. Replace damaged terminal block. |
| Sunku įkišti laidą | Wire gauge too large; screw not sufficiently loosened. | Ensure wire gauge matches terminal block specifications. Loosen the screw completely before attempting to insert the wire. |
If problems persist, consult a qualified electrician or contact WAGO technical support.
7. Techninės specifikacijos
The following specifications apply to the WAGO 284-681 3-Conductor Through Terminal Block:
- Modelis: 284-681
- Prekinis ženklas: WAGO
- Lenkų skaičius: 3
- Jungties tipas: Varžtas
- Montavimo tipas: DIN bėgio kalnas
- Atitinkama specifikacija: DIN
- ASIN: B07QJB7CTQ
- Gamintojas: Wago
- Pirmas prieinamas: 9 m. vasario 2020 d
- Note: For detailed electrical ratings (voltage, current, wire size range), please refer to the product packaging or official WAGO datasheets.
