Įvadas
This manual provides essential information for the safe and efficient operation of your Utilitech 500-Watt Halogen Stand Work Light. This work light is ETL rated for wet locations and features a 2 ft cord with a 3-prong grounded plug. Please read all instructions carefully before use and retain this manual for future reference.
Saugos informacija
Visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir sužalojimo pavojų.
- Ensure the work light is placed on a stable, level surface.
- Do not operate the light near flammable materials.
- Allow the bulb to cool completely before handling or replacing. Halogen bulbs become extremely hot during operation.
- Nežiūrėkite tiesiai į šviesos šaltinį, kai jis įjungtas.
- Keep the cord away from heat, oil, sharp edges, and moving parts.
- Always unplug the light from the power source before performing any maintenance or adjustments.
- This product is designed for temporary outdoor use and is ETL rated for wet locations. However, avoid submerging the unit in water.
Produktas baigtasview
The Utilitech 500-Watt Halogen Stand Work Light is designed to provide bright illumination for various tasks. It features a durable construction and adjustable head for directional lighting.
1 pav.: priekis view of the Utilitech 500-Watt Halogen Stand Work Light, showing the yellow stand, black light housing, and protective metal grill.
Figure 2: Dimensions of the Utilitech 500-Watt Halogen Stand Work Light. The light measures approximately 10 inches in length, 8.9 inches in width, and 11.8 inches in height.
Sąranka
The Utilitech 500-Watt Halogen Stand Work Light comes pre-assembled. Follow these steps for initial setup:
- Padėkite darbo žibintą ant stabilaus, lygaus paviršiaus.
- Ensure the power cord is free from kinks or damage. The light features a 2-foot cord with a 3-prong grounded plug.
- To adjust the horizontal angle of the light, loosen the knob located on the underside of the light housing. Rotate the light to the desired left or right position, then tighten the knob securely.
- To adjust the vertical angle of the light, loosen the knob located on the side of the light housing. Tilt the light up or down to the desired angle, then tighten the knob securely.
Naudojimo instrukcijos
To operate your work light:
- Plug the 3-prong grounded plug into a compatible electrical outlet.
- Ensure the light is positioned to illuminate your work area effectively.
- The light will turn on immediately upon plugging in. There is no separate on/off switch on this model.
- When finished, unplug the light from the electrical outlet.
- Allow the light to cool down completely before moving or storing.
Priežiūra
Regular maintenance ensures the longevity and safe operation of your work light.
- Valymas: Prieš valydami atjunkite maitinimą. Naudokite minkštą, damp šluoste nuvalykite šviestuvo išorę. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Lemputės keitimas:
- Ensure the light is unplugged and completely cool.
- Carefully remove the protective metal grill.
- Gently remove the old halogen bulb. Avoid touching the new bulb with bare hands, as oils can reduce its lifespan. Use a clean cloth or glove.
- Insert the new 500-watt halogen bulb, ensuring it is seated correctly.
- Replace the protective metal grill.
- Laido patikrinimas: Periodically inspect the power cord for any signs of damage, cuts, or fraying. If damage is found, discontinue use and have the cord repaired by a qualified electrician.
- Saugykla: Store the work light in a dry, cool place when not in use.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šviesa neįsijungia. | Lizdas nemaitinamas. Lemputė perdegusi. Laisvas ryšys. | Patikrinkite maitinimo lizdą kitu įrenginiu. Replace the halogen bulb. Įsitikinkite, kad kištukas iki galo įkištas į elektros lizdą. |
| Šviesos mirgėjimas. | Atsipalaidavusi lemputė. Nestabilus maitinimo šaltinis. | Ensure the bulb is securely seated. Pabandykite prijungti prie kito lizdo. |
| Šviesa blanki. | Lemputė artėja prie savo tarnavimo laiko pabaigos. Dirt/debris on bulb or reflector. | Pakeiskite lemputę. Clean the bulb and reflector when cool and unplugged. |
Specifikacijos
- Prekinis ženklas: Utilitech
- Modelio numeris: MPL1025-C500K9030
- Maitinimo šaltinis: Su laidu elektra
- Vattage: 500 vatų
- Šviesos šaltinio tipas: Halogenas
- Spalva: Geltona
- Medžiaga: Glass (Shade), Metal (Stand)
- Apdailos tipas: Nuvalytas
- Gaminio matmenys: 10 colio ilgio x 8.9 colių pločio x 11.8 colio aukščio
- Laido ilgis: 2 pėdų
- Kištuko tipas: 3 šakų įžemintas kištukas
- Saugos įvertinimas: ETL skirtas drėgnoms vietoms
- UPC: 354838487954
Oficialūs produktų vaizdo įrašai
Šiuo metu nėra jokių oficialių šio produkto vaizdo įrašų iš pardavėjo.
Garantija ir palaikymas
Konkrečios informacijos apie garantiją ir tiesioginės pagalbos kontaktiniai duomenys nepateikiami prieinamuose produkto duomenyse. Žr. produkto pakuotę arba oficialius gamintojo duomenis. websvetainėje rasite garantijos sąlygas ir klientų aptarnavimo kontaktus.
