„Danfoss DEVIwet #088U2001“ temperatūros reguliatoriaus naudotojo vadovas

1. Įvadas

This manual provides instructions for the installation, operation, and maintenance of the Danfoss DEVIwet #088U2001 Temperature Controller. This device is designed for precise temperature regulation, featuring a clear DEVI DEVIWET display for user interaction.

2. Saugos informacija

Please read these safety instructions carefully before installing or operating the device. Failure to follow these instructions may result in property damage, injury, or death.

• Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis vietinių elektros kodeksų ir taisyklių.
• Prieš bet kokius montavimo, techninės priežiūros ar remonto darbus įsitikinkite, kad maitinimo šaltinis yra atjungtas.
• Nelaikykite prietaiso nuo drėgmės ar ekstremalių temperatūrų.
• Nebandykite patys atidaryti ar taisyti įrenginio. Kreipkitės į kvalifikuotus techninės priežiūros darbuotojus.
• Pakavimo medžiagas laikykite vaikams nepasiekiamoje vietoje.

3. Produktas baigtasview

The DEVIwet #088U2001 is a wall-mounted temperature controller with a digital display and touch controls. It is designed for accurate temperature management in various environments.

1 paveikslas: Priekyje view of the Danfoss DEVIwet #088U2001 Temperature Controller. The device is white, square, and features a central digital display showing "21.5°" with up/down arrows and a heating icon. A back arrow and the DEVI logo are also visible.

2 paveikslas: The Danfoss DEVIwet #088U2001 Temperature Controller mounted on a light grey wall. This image provides a perspective of the device's size and appearance in a typical installation setting.

3 paveikslas: Iš arti view of the DEVIwet #088U2001's digital display. The display shows "21.5°" in red, along with touch-sensitive up and down arrows, a heating symbol, and a back arrow. The DEVI logo is located at the bottom right of the display area.

Pagrindinės funkcijos:

• Original DEVI DEVIWET display
• Jutiklinio valdymo sąsaja
• Battery-powered operation (also supports 230V)
• LCD ekranas su apšvietimu

4. Sąranka ir diegimas

This section outlines the general steps for setting up your DEVIwet #088U2001 Temperature Controller. For detailed wiring diagrams and specific installation requirements, refer to the separate installation guide provided with the product or consult a qualified electrician.

4.1 Maitinimo šaltinis

The device can be powered by batteries or connected to a 230 Volts AC power supply. Ensure the correct power source is used and all connections are secure.

• Akumuliatoriaus montavimas: Open the battery compartment (typically on the rear or side) and insert the required batteries, observing polarity.
• Laidinis ryšys: Connect the 230V power supply wires to the designated terminals inside the unit. This step requires professional installation.

4.2 Montavimas

Mount the controller on a flat, vertical surface, away from direct sunlight, drafts, or heat sources that could affect temperature readings. Use appropriate screws and wall plugs for secure mounting.

5. Naudojimo instrukcijos

The DEVIwet #088U2001 features a user-friendly touch control interface and an LCD display.

5.1 Ekranas baigtasview

The LCD display shows the current temperature, set temperature, heating status, and other operational indicators. The backlight activates upon touch for improved visibility.

5.2 Temperatūros nustatymas

1. Touch the display to activate the backlight and controls.
2. Naudokite Up (⌃) ir Žemyn (⌄) arrows on the screen to adjust the desired temperature.
3. The new set temperature will be saved automatically after a few seconds of inactivity, or you can press the Atgal (↶) arrow to confirm and exit.

5.3 Šildymo indikatorius

A heating symbol (≈) will appear on the display when the controller is actively calling for heat to reach the set temperature.

6. Priežiūra

Reguliarus temperatūros reguliatoriaus techninis aptarnavimas užtikrina optimalų veikimą ir ilgaamžiškumą.

6.1 Valymas

Nuvalykite ekraną ir casing su minkštu, sausu arba šiek tiek sudrėkintuamp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.

6.2 Akumuliatoriaus keitimas

If the device is battery-powered, replace batteries when the low battery indicator appears on the display. Use only the specified battery type. Dispose of old batteries responsibly.

7. Problemų sprendimas

If you encounter issues with your DEVIwet #088U2001, refer to the following common problems and solutions:

Jei problema išlieka ir išbandžius šiuos sprendimus, kreipkitės į kvalifikuotus techninės priežiūros darbuotojus.

8. Specifikacijos

9. Garantija ir palaikymas

Information regarding product warranty and specific support contacts is not available in the provided product data. Please refer to the documentation included with your purchase or visit the official DEVI websvetainėje, kurioje rasite informacijos apie garantiją ir klientų aptarnavimo galimybes.