Technoline WS8019

„Technoline Petite WS8019“ radijo bangomis valdomo sieninio laikrodžio naudotojo vadovas

Produktas baigtasview

This manual provides detailed instructions for the Technoline Petite WS8019 Radio-Controlled Wall Clock. Please read carefully before use to ensure proper operation and longevity of your device.

Pagrindinės savybės

Priekyje view of the Technoline WS8019 radio-controlled wall clock, displaying time, date, day, and indoor temperature.

Priekyje view of the Technoline WS8019 radio-controlled wall clock, displaying time, date, day, and indoor temperature.

Saugos informacija

ĮSPĖJIMAS: Naudoti tik patalpose.

Sąrankos vadovas

1. Akumuliatoriaus įdėjimas

  1. Atidarykite baterijų skyriaus dangtelį laikrodžio gale.
  2. Insert 2 x AA batteries (not included) according to the polarity markings (+ and -).
  3. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.

Note: Use new, high-quality batteries for optimal performance.

Galinis view of the Technoline WS8019 clock, illustrating the battery compartment and wall mounting slot.

Galinis view of the Technoline WS8019 clock, illustrating the battery compartment and wall mounting slot.

2. Initial Power-On and Radio Signal Reception

  1. Once batteries are inserted, the clock will automatically begin searching for the DCF-77 radio signal.
  2. Place the clock near a window, away from electronic devices that may cause interference, for best reception.
  3. The radio signal icon (often a tower or waves) will flash during reception and become solid once synchronized.
  4. This process may take several minutes or up to 24 hours, depending on signal strength and location.
  5. The clock will automatically set the correct time, date, and weekday once the signal is received.

3. Manual Time Setting (if radio signal is unavailable)

If the radio signal cannot be received, you can manually set the time and date.

  1. Press and hold the 'SET' button (or similar, refer to physical buttons on the device) for a few seconds to enter manual setting mode.
  2. Norėdami reguliuoti mirksinčią reikšmę (pvz., valandą, minutę, metus, mėnesį, dieną), naudokite mygtukus „+“ arba „-“.
  3. Press 'SET' again to confirm the setting and move to the next value.
  4. Exit manual setting mode by pressing 'SET' after the last setting or by waiting for the clock to time out.

4. Montavimo parinktys

The clock can be placed on a flat surface using its integrated stand or mounted on a wall.

Naudojimo instrukcijos

1. Time Display (12/24h)

The clock can display time in either 12-hour (with AM/PM indicator) or 24-hour format. Press the '12/24' button (or similar, usually located on the back) to switch between formats.

2. Laiko juostos koregavimas

If you are in a different time zone from the DCF-77 signal, you can adjust the time by +/- 9 hours. Press the 'ZONE' button (or similar) and use '+' or '-' to set the offset.

3. Date and Day of Week Display

The clock automatically displays the current date and day of the week. The weekday can be displayed in 5 different languages. Refer to the physical buttons for language selection (e.g., 'LANG' button).

4. Vidaus temperatūros rodymas

The current indoor temperature is displayed in Celsius (°C) or Fahrenheit (°F). Press the '°C/°F' button (or similar) to switch between units.

5. Adjustable Night Light Function

The clock features an adjustable night light. This function can be activated or deactivated, and its brightness may be adjustable. Refer to the 'LIGHT' button or settings menu for control.

Priežiūra ir priežiūra

Trikčių šalinimas

problemaGalima priežastisSprendimas
Clock does not display time or is blank.Baterijos išsikrovė arba įdėtos neteisingai.Check battery polarity and replace with new batteries.
Radio-controlled time (DCF-77) does not synchronize.Weak signal, interference, or incorrect placement.Move the clock closer to a window, away from electronic devices. Allow up to 24 hours for synchronization. Manually set the time if necessary.
Time is incorrect after synchronization.Neteisingas laiko juostos nustatymas.Adjust the time zone offset using the 'ZONE' button.
Ekranas blankus arba mirga.Maža akumuliatoriaus energija.Pakeiskite baterijas.

Jei problemos išlieka, susisiekite su klientų aptarnavimo tarnyba.

Techninės specifikacijos

FunkcijaDetalė
Prekės ženklasTechnoline
Modelio numerisWS8019
SpalvaSidabras
Gaminio matmenys (I x P x A)21.2 x 3.2 x 14 cm
Prekės svoris444 g
MedžiagaSilver (finish)
Ypatingos savybėsTemperature display, Radio-controlled clock
Ekrano tipasSkaitmeninis
StiliusModernus
Maitinimo šaltinisMaitinamas baterijomis
Naudojimas viduje / laukeVidinis

Susiję dokumentai - WS8019

Preview Mėnulio fazės laikrodžio naudojimo instrukcija – radijo bangomis valdomas laikas, data, temperatūra
Išsami mėnulio fazės laikrodžio naudojimo instrukcija, kurioje išsamiai aprašomas „Technoline“ radijo bangomis valdomo DCF-77 laikrodžio nustatymas, funkcijos, rankiniai nustatymai ir priežiūra.
Preview Radijo bangomis valdomas projekcinis laikrodis su lauko temperatūros davikliu – naudojimo instrukcija
Šioje naudojimo instrukcijoje pateikiama išsami informacija apie radijo bangomis valdomo projekcinio laikrodžio su lauko temperatūros siųstuvu nustatymą, naudojimą ir priežiūrą, įskaitant tokias funkcijas kaip DCF-77 laiko sinchronizavimas, temperatūros stebėjimas ir projekcijos ekranas.
Preview Belaidės 868 MHz meteorologinės stoties naudojimo instrukcija
Išsami belaidės 868 MHz meteorologinės stoties naudojimo instrukcija, kurioje aprašoma sąranka, funkcijos, veikimas ir specifikacijos. Sužinokite, kaip įdėti baterijas, nustatyti laiką, suprasti orų prognozes ir prižiūrėti įrenginį.
Preview „TechnoLine DCF-77“ radijo bangomis valdomo projekcinio laikrodžio su skaitmeniniu termometru naudotojo vadovas
Išsamus „TechnoLine DCF-77“ radijo bangomis valdomo projekcinio laikrodžio su skaitmeniniu termometru naudotojo vadovas. Sužinokite, kaip nustatyti, valdyti ir prižiūrėti laikrodį, įskaitant tokias funkcijas kaip laiko projekcija, žadintuvas, patalpų temperatūros rodymas ir radijo bangomis valdoma laiko sinchronizacija.
Preview „Technoline“ radijo bangomis valdomo projekcinio laikrodžio su skaitmeniniu termometru naudotojo vadovas
Išsamus „Technoline WT-590e7“ radijo bangomis valdomo projekcinio laikrodžio ir skaitmeninio termometro vadovas. Sužinokite apie sąranką, funkcijas, DCF-77 laiko sinchronizavimą, žadintuvą, rankinius nustatymus ir specifikacijas.
Preview WT 498 radijo bangomis valdomo laikrodžio naudojimo instrukcija
Šioje naudojimo instrukcijoje pateikiamos išsamios instrukcijos, kaip nustatyti, naudoti ir šalinti WT 498 radijo bangomis valdomo laikrodžio su automatine laiko sinchronizacija, žadintuvo funkcijomis ir temperatūros rodmeniu parametrus.