Transpocket 180 Stick Welder User Manual

1. Įvadas

The Fronius Transpocket 180 is a highly portable and robust stick welder designed for various welding applications. It incorporates advanced features such as HotStart, SoftStart, and anti-stick technology to ensure a smooth and stable welding process. This manual will guide you through the proper use and care of your welding machine.

2. Sąranka ir diegimas

Before operating the Transpocket 180, ensure proper setup to guarantee safety and optimal performance.

1. Išpakavimas: Carefully remove the welder and all accessories from the packaging. Inspect for any signs of damage during transit.
2. Maitinimo jungtis: Connect the welder to a suitable power supply. Ensure the mains voltage and frequency match the specifications of the machine (50-60Hz). The recommended mains fuse is 16A / 20A.
3. Gruntas Clamp Ryšys: Tvirtai pritvirtinkite žemės laidąamp to the workpiece or a clean, bare metal surface that is part of the electrical circuit. A good ground connection is crucial for stable arc.
4. Elektrodo laikiklio prijungimas: Connect the electrode holder cable to the appropriate terminal on the welder. Insert the desired electrode into the holder.
5. Vėdinimas: Ensure adequate ventilation around the welder to prevent overheating. Do not block air vents.

3. Naudojimo instrukcijos

The Transpocket 180 is designed for ease of use with its single knob operation and clear 7-segment Dot matrix display.

• Maitinimas: Turn on the welder using the main power switch. The display will illuminate.
• Dabartinis koregavimas: Use the single control knob to set the desired welding current. The digital display shows the current setting.
• Elektrodų pasirinkimas: The Transpocket 180 supports various electrode types. It includes operating modes specifically designed for Basic 7018 and Cellulose 6010 electrodes. The maximum electrode size supported is 5/32 inches.
• Welding Features:
  • HotStart: Provides a brief surge of current at the start of welding to ensure easy arc ignition.
  • SoftStart: Ensures a stable and smooth arc start, particularly useful for certain electrode types.
  • Apsauga nuo lipnumo: Automatically reduces the welding current if the electrode sticks to the workpiece, allowing the operator to easily remove it without damaging the electrode or the machine.
• Suvirinimo procesas: Maintain proper arc length and travel speed for optimal weld quality. Refer to welding guides for specific techniques based on material and electrode type.

4. Priežiūra

Regular maintenance ensures the longevity and reliable performance of your Transpocket 180 welder.

• Valymas: Periodically clean the exterior of the welder with a dry, soft cloth. Ensure air vents are free from dust and debris. The unit features an integrated dust filter.
• Kabelio apžiūra: Reguliariai tikrinkite suvirinimo kabelius, elektrodų laikiklį ir įžeminimo laidą.amp ar nėra kokių nors pažeidimų, dilimo ar atsilaisvinusių jungčių požymių. Nedelsdami pakeiskite pažeistus komponentus.
• Saugykla: Store the welder in a clean, dry environment away from excessive dust, moisture, and extreme temperatures.
• Profesionalus aptarnavimas: For internal cleaning or any complex repairs, contact an authorized Fronius service center.

5. Problemų sprendimas

This section provides solutions to common issues you might encounter with your Transpocket 180.

6. Techninės specifikacijos

Key technical data for the Fronius Transpocket 180 Stick Welder:

7. Garantija ir palaikymas

For detailed warranty information and technical support, please contact Fronius directly or refer to the official documentation included with your product. Specific warranty terms and conditions may vary by region and purchase date.

Gamintojas: Fronius

For service or inquiries, please visit the official Fronius websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba.