Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell Instruction Manual

1. Produktas baigtasview

The Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell is designed for in-ground swimming pools up to 15,000 gallons. It provides naturally sanitized water, reducing the need for traditional chlorine methods and offering a more comfortable swimming experience.

Image: The Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell, a key component for pool sanitization.

Pagrindinės funkcijos:

• Delivers silky smooth, naturally sanitized water that won’t irritate eyes, dry out skin, or cause fabrics to fade.
• Reduces chlorine costs by up to 50%.
• Nepriklausomai sertifikuotas Nacionalinio sanitarijos fondo (NSF) už patikimą veikimą.
• Compatible with Hayward AquaRite, AquaRite Pro, SwimPure Plus salt chlorination systems.
• Compatible with Hayward OmniLogic, OmniHub, ProLogic, and AquaPlus automation and control systems.

2. Sąranka ir diegimas

Proper installation is crucial for the optimal performance and longevity of your TurboCell. Always ensure the pool pump is off and power to the chlorinator is disconnected before beginning installation.

2.1 Saugos priemonės

• Always disconnect power to the pool pump and chlorinator before handling the salt cell.
• Ensure proper ventilation if working with chemicals.
• Dėvėkite tinkamas asmenines apsaugos priemones (AAP), tokias kaip pirštinės ir akių apsauga.

2.2 diegimo žingsniai

1. Išjunkite maitinimą: Disconnect power to the pool pump and the salt chlorination system at the circuit breaker.
2. Unplug Salt Cell: Unplug the salt cell connector from the chlorinator control unit.
3. Išleiskite vandenį: Open the strainer lid on the pool pump to allow air into the system, helping to drain water from the salt cell for easier removal.
4. Remove Old Cell: Loosen the unions on both ends of the existing salt cell and carefully remove it from the plumbing.
5. Install New Cell: Position the new Hayward W3T-Cell-3 TurboCell, ensuring the water flow indicator on the cell aligns with the direction of water flow in your plumbing.
6. Priveržkite jungtis: Securely tighten the unions on both ends of the salt cell to prevent leaks.
7. Iš naujo prijunkite maitinimą: Plug the salt cell connector back into the chlorinator control unit. Close the strainer lid on the pump.
8. Atkurti maitinimą: Turn on the pool pump and the salt chlorination system at the circuit breaker.
9. Check Salt Levels: After powering on, press the "Diagnostics" button on your chlorinator to check the salt level readings. The system will calibrate, and the correct reading should appear.

Vaizdas: priekis view of the Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell, showing its design and connections.

Image: Diagram illustrating the dimensions (length, height, width, cord length, weight) of the Hayward W3T-Cell-3 TurboCell.

3. Operacija

The Hayward TurboCell works by converting salt in your pool water into chlorine, providing continuous sanitization. This process is managed by your compatible Hayward chlorination or automation system.

3.1 How Salt Chlorination Works

1. Pool salt (NaCl) is added to the water.
2. Water dissolves salt into a low, teardrop-level salinity.
3. The chlorinator adjusts chlorine production for perfect balance.
4. The salt conversion cell turns salt into chlorine gas (Cl₂).
5. Chlorine gas (Cl₂) reacts with pool water to form a sanitizing compound (HOCl).

Image: Diagram illustrating the five-step process of how Hayward salt chlorination systems convert salt into chlorine for pool sanitization.

Image: Illustrates the natural sanitization process, creating a virtually endless supply of chlorine from salt.

4. Priežiūra

Regular maintenance ensures the longevity and efficiency of your TurboCell. Inspect and clean the cell every 3 months or as needed.

4.1 Cleaning the Salt Cell

1. Atjunkite maitinimą: Turn off the chlorinator and pool pump, and unplug the salt cell.
2. Remove Cell: Remove the salt cell from the plumbing as described in the installation steps.
3. Paruoškite valymo tirpalą: Use a salt cell cleaning holder (if available) or a suitable container. Fill the cell with a solution of 1/3 muriatic acid and 2/3 clean water.
4. Mirkyti: Allow the cell to soak for approximately 15 minutes to dissolve mineral deposits on the titanium plates. Do not exceed 15 minutes to avoid damage.
5. Išskalauti: Pour out the cleaning solution and thoroughly rinse the salt cell with clean water.
6. Įdiekite iš naujo: Reinstall the cleaned salt cell into the plumbing, ensuring secure connections. Reconnect the salt cell plug and restore power to the system.

Pastaba: Always follow safety guidelines when handling muriatic acid. Refer to your chlorinator's manual for specific cleaning instructions and recommended pool chemistry levels.

5. Problemų sprendimas

If your Hayward W3T-Cell-3 TurboCell is not performing as expected, consult the following common issues and solutions:

For detailed diagnostic codes and advanced troubleshooting, refer to your specific Hayward chlorinator control unit's manual.

6. Specifikacijos

7. Parama

For further assistance, technical support, or warranty inquiries, please contact Hayward customer service. You can also visit the official Hayward website for additional resources and product information.

• Haywardas Websvetainė: hayward.com
• Klientų aptarnavimas: Refer to your product packaging or the Hayward websvetainę, kurioje rasite naujausią kontaktinę informaciją.