2hp Play

2hp Play Sample Player Eurorack Synth Module Instruction Manual

Išsamus įrengimo, naudojimo ir priežiūros vadovas.

1. Produktas baigtasview

2hp Play Sample Player Eurorack Synth Module front view

The 2hp Play is a high-fidelity sample player designed for Eurorack modular synthesizer systems. It offers a robust feature set for loading, manipulating, and playing back audio samples with precision and low latency. This module is an essential tool for integrating sampled audio into your modular workflow.

Pagrindinės funkcijos:

2. Sąranka ir diegimas

Galios reikalavimai:

The 2hp Play module requires standard Eurorack power. Ensure your Eurorack case provides sufficient power (+12V, -12V, and +5V) for all installed modules. Refer to your Eurorack case manual for specific power supply details. The module connects via a 16-pin power connector.

Modulio montavimas:

  1. Power off your Eurorack case completely before installing or removing any modules.
  2. Locate an available space in your Eurorack case that matches the module's width (2hp).
  3. Carefully align the 16-pin power connector on the module with the corresponding header on your case's power bus board. Ensure the red stripe on the power cable aligns with the -12V pin on both the module and the bus board. Incorrect connection can damage the module.
  4. Gently press the module into place, ensuring it is seated securely.
  5. Use the provided screws to fasten the module to your Eurorack case rails. Do not overtighten.

Pradiniai nustatymai:

The 2hp Play comes with a pre-loaded SD card. Insert the SD card into the module's SD card slot. The module is ready for use once powered on. For custom samples, refer to the 'Sample Loading and Selection' section.

Eurorack System Integration ExampLe:

The following video demonstrates the setup and integration of Eurorack modules within an Arturia MiniBrute 2 ecosystem. While not featuring the 2hp Play specifically, it provides a visual guide to the general process of installing and connecting Eurorack modules, which is applicable to your 2hp Play module.

Video: Arturia MiniBrute 2 Ecosystem Overview. This video illustrates the process of setting up and integrating Eurorack modules into a compatible system, including power connections and module placement.

3. Operacija

Sample Loading and Selection:

The 2hp Play can load up to 32 samples. Samples are selected using the dedicated 'File' knob on the module. For dynamic sample switching, connect a Control Voltage (CV) source to the associated CV input. The module supports various audio file formats without specific naming conventions or special formatting.

Atkūrimo režimai:

The module offers several playback modes to suit different musical applications:

All playback modes feature extremely low latency for responsive performance.

Tono valdymas:

The 2hp Play provides extensive control over sample pitch. The dedicated pitch knob allows for adjustment across a wide range, from two octaves up to three octaves down. This knob can operate in a free-running mode for continuous adjustment or be quantized to semitones for melodic applications. The Pitch CV input tracks volt per octave (V/octave) accurately, enabling external sequencers or other CV sources to control the sample's pitch musically.

Configuration and Expansion:

The module's feature set can be expanded and customized by editing a configuration file located on the SD card. Refer to the official 2hp documentation or website for detailed instructions on modifying the config file to unlock additional functionalities or tweak existing parameters.

4. Priežiūra

SD kortelės tvarkymas:

Regularly back up the contents of your SD card to prevent data loss. When adding or removing samples, it is recommended to safely eject the SD card from your computer before reinserting it into the module. If formatting the SD card, use a reliable formatting tool and ensure it is formatted to a compatible file sistema (pvz., FAT32).

Valymas:

To clean the module, gently wipe the front panel with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the module's finish or internal components. Ensure no liquids enter the jacks or potentiometers.

5. Problemų sprendimas

6. Techninės specifikacijos

SpecifikacijaDetalė
Prekės ženklas2 AG
Modelio pavadinimasŽaisti
Prekės modelio numeris1ce68984-ba4a-4b22-b43b-8bbd6edad90e
Prekės svoris1 svaro
Gaminio matmenys10 x 6 x 4 colio
Korpuso MedžiagaLegiruotasis plienas
Medžiagos tipasLegiruotasis plienas
Spalvametallic silver
Jungties tipas1/8" jack, 16-pin power connector
Įtraukti komponentaiSD card with sampturinys

7. Garantija ir palaikymas

For information regarding product warranty, repairs, or technical support, please refer to the official 2hp websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą, jei prireiktų garantijos.