1. Įvadas
This manual provides essential information for the proper installation, operation, and maintenance of your DS18 PRO-X12.4M 12-inch Midrange Loudspeaker. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.
2. Pagrindinės savybės
- Vidutinio diapazono našumas: Designed to handle the audible sound spectrum, providing clear instrumentals and vocals.
- Didelės galios valdymas: Delivers 900W Max Power with 450W RMS at 4 Ohms.
- Patvari garso ritė: Features a high-temperature Kapton voice coil for structural integrity and extended speaker life.
- Patobulintas garsas: Upgrades stock stereo systems by providing a true midrange sound experience.
- Ferrite Magnet: Equipped with high-strength Ferrite magnets for a wider range of tones and robust power handling at high volumes.
3. Specifikacijos
| Specifikacija | Vertė |
|---|---|
| Modelis | PRO-X12.4M |
| Tipas | Vidutinio diapazono garsiakalbis |
| Dydis | 12 colių |
| RMS galia | 450W |
| MAX galia | 900W |
| Dažnio atsakas | 63.5Hz-11.3KHz |
| Varža | 4 omų |
| Jautrumas | 97.5 dB |
| Erdvinė medžiaga | Audinio kraštas |
| Rėmo medžiaga | Raudono plieno krepšelis |
| Kūgio medžiaga | Non-Pressed Paper Cone |
| Magnetinė medžiaga | Feritas |
| Balso ritės laidas | CCAR |
| Balso ritės dydis | 2.5 colių |
| Magneto dydis | 60 uncijos |
| Montavimo gylis | 5.35 coliai (126 mm) |
| Iškirpimo matmenys | 11.22 coliai (285 mm) |
| UPC | 810005182249 |
4. Sąranka ir diegimas
Proper installation is crucial for the performance and safety of your loudspeaker. It is recommended that installation be performed by a qualified professional.
4.1 Montavimas
The DS18 PRO-X12.4M is designed for car door or similar panel mounting. Ensure the mounting location provides sufficient depth and clearance for the speaker and its magnet structure. The cut-out dimension required is 11.22 coliai (285 mm) and the mounting depth is 5.35 coliai (126 mm).
Figure 1: Diagram showing the overall diameter, mounting depth, and front mount baffle cut-out dimensions for the DS18 PRO-X12.4M loudspeaker.
4.2 Laidai
- Maitinimo šaltinis: Prijunkite garsiakalbį prie tinkamo amplifier capable of delivering 450W RMS at 4 Ohms. Ensure the amplifier's impedance matches the speaker's 4 Ohm impedance.
- Poliškumas: Observe correct polarity when connecting the speaker wires to the amplifier. Positive (+) terminals should connect to positive, and negative (-) to negative. Incorrect polarity can lead to reduced sound quality and phase issues.
- Saugūs ryšiai: Ensure all connections are tight and free from corrosion. Use high-quality speaker wire of appropriate gauge for the power level.
2 pav.: šonas view of the loudspeaker, highlighting the magnet structure and the speaker terminals for wiring connections.
5. Eksploatacijos gairės
- Įsilaužimo laikotarpis: Allow a break-in period of approximately 10-20 hours of moderate listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.
- Garsumo valdymas: Avoid prolonged listening at extremely high volumes, which can cause hearing damage and potentially damage the speakers.
- Amppadidinimo prieaugis: Nustatykite savo amplifier's gain correctly to prevent clipping and distortion. Consult your amplifier's manual for proper gain setting procedures.
6. Priežiūra
Regular maintenance helps ensure the longevity and performance of your loudspeaker.
- Valymas: Garsiakalbio kūgį ir rėmą švelniai nuvalykite minkštu, sausu skudurėliu. Venkite naudoti stiprias chemines medžiagas ar abrazyvines medžiagas.
- Patikra: Periodically check speaker connections for tightness and signs of corrosion. Inspect the speaker cone and surround for any tears or damage.
- Aplinkos veiksniai: Protect the speakers from direct sunlight, extreme temperatures, and moisture.
3 pav.: Kampinis priekis view of the DS18 PRO-X12.4M loudspeaker, showcasing its black non-pressed paper cone and red steel basket.
7. Problemų sprendimas
If you experience issues with your loudspeaker, refer to the following common problems and solutions:
- Nėra garso:
- Patikrinkite visas laidų jungtis nuo ampgyvesnis kalbėtojui.
- Patikrinkite ampkeltuvas įjungtas ir tinkamai veikia.
- Ensure the audio source is playing and volume is up.
- Iškraipytas garsas:
- Reduce the volume level. Distortion often occurs when the amplifier or speaker is overdriven.
- Patikrinkite amplifier gain settings to ensure they are not too high.
- Inspect speaker cone and surround for physical damage.
- Mažas garsumas:
- Confirm correct wiring polarity.
- Patikrinkite amplifier output and settings.
- Ensure the audio source volume is adequate.
If problems persist after performing these checks, contact DS18 customer support or a qualified car audio technician.
8. Informacija apie garantiją
The DS18 PRO-X12.4M Loudspeaker comes with a limited manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official DS18 websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
9. Parama
For further assistance, technical support, or inquiries about your DS18 PRO-X12.4M Loudspeaker, please visit the official DS18 website or contact their customer support department. You can find contact information and additional resources on their websvetainę.
4 pav.: galinis view of the loudspeaker, displaying the product label with model information and specifications.
