Phanteks Eclipse P400A Digital ATX Mid-tower Instruction Manual

1. Įvadas

This manual provides detailed instructions for the Phanteks Eclipse P400A Digital ATX Mid-tower chassis. It covers essential information regarding the product's features, setup, operation, and maintenance to ensure optimal performance and longevity. The Eclipse P400A is designed for high airflow and features a full metal mesh front panel, tempered glass side panel, and integrated Digital-RGB lighting.

2. Pagrindinės savybės

• Optimal Cooling Performance: Features an ultra-fine performance mesh front panel for maximum airflow and a tempered glass side panel.
• Erdvus interjeras: Supports up to E-ATX motherboards, 280/360mm radiators in the front, and vertical GPU mounting (with optional bracket PH-VGPUKT_02).
• Integrated Digital-RGB Controller: Includes three pre-installed D-RGB fans that can sync with compatible motherboards for customizable lighting effects.
• Plačios saugojimo galimybės: Provides six HDD positions (two trays included) and eight SSD mounting locations (two dedicated brackets included).
• Easy Accessibility I/O: Front panel includes 2x USB 3.0 ports, microphone and headphone jacks, power button, reset button, and D-RGB controller.

3. Sąranka ir diegimas

Before beginning installation, ensure all components are accounted for and refer to your motherboard and component manuals for specific installation procedures. Always handle components with care and use anti-static precautions.

3.1 Unpacking the Chassis

Carefully remove the chassis from its packaging. Inspect for any damage during transit. Retain the packaging for future transport or storage.

Figure 3.1: Phanteks Eclipse P400A Digital ATX Mid-tower (White)

3.2 Šoninių skydų nuėmimas

The tempered glass side panel is secured with thumbscrews. Carefully unscrew these and gently remove the panel. The opposite side panel can also be removed for cable management access.

3.3 Pagrindinės plokštės montavimas

1. Install the I/O shield into the rear opening of the chassis.
2. Align your ATX, micro-ATX, or mini-ITX motherboard with the pre-installed standoffs. For E-ATX motherboards up to 272mm wide, ensure optional HDD trays are not in use.
3. Pritvirtinkite pagrindinę plokštę pridėtais varžtais.

3.4 Komponentų diegimas

• Vaizdo plokštė (GPU): Install your graphics card into the appropriate PCIe slot on the motherboard. The case supports GPUs up to 420mm in length. Vertical GPU mounting is supported with the optional PH-VGPUKT_02 bracket.
• CPU aušintuvas: Install your CPU cooler. The case accommodates CPU coolers up to 160mm in height.
• Saugojimo diskai: Utilize the dedicated SSD brackets and HDD trays for 2.5-inch and 3.5-inch drives respectively. The case offers extensive storage options with 6x HDD and 8x SSD mounting locations.
• Maitinimo blokas (PSU): Install the PSU in the designated compartment. The PSU clearance is 270mm.

3.5 Kabelių valdymas

The chassis provides 25mm of space for cable management behind the motherboard tray. Utilize the included velcro ties and routing channels to organize cables for improved airflow and aesthetics.

4. Operacija

4.1 Priekinis įvesties / išvesties skydelis

The top front panel provides convenient access to essential controls and ports:

• Maitinimo mygtukas: Paspauskite, kad įjungtumėte arba išjungtumėte sistemą.
• Atkūrimo mygtukas: Paspauskite, kad paleistumėte sistemą iš naujo.
• USB 3.0 prievadai (x2): Prijunkite su USB 3.0 suderinamus įrenginius, kad galėtumėte greitai perduoti duomenis.
• Mikrofono lizdas: Prijunkite mikrofoną.
• Ausinių lizdas: Prijunkite ausines arba garsiakalbius.
• D-RGB Controller Buttons: Used to cycle through various Digital-RGB lighting modes and colors for the pre-installed fans and compatible D-RGB products.

Figure 4.1: Front I/O Panel Overview

4.2 Digital-RGB Lighting Control

The integrated D-RGB controller allows for direct control of the lighting effects. Alternatively, if your motherboard supports Digital-RGB synchronization, you can connect the case's D-RGB cables to your motherboard's header and control lighting via motherboard software.

5. Priežiūra

5.1 Dulkių filtrų valymas

To maintain optimal airflow and cooling performance, regularly clean the dust filters. The front mesh panel is designed for easy removal and cleaning. Other filters, such as those for the top and bottom fan mounts, should also be checked and cleaned periodically.

1. Gently pull the front mesh panel to detach it.
2. Use a soft brush or compressed air to remove accumulated dust.
3. Reattach the panel securely.

5.2 Bendras valymas

Wipe the exterior surfaces of the chassis with a soft, damp audiniu. Venkite naudoti stiprių cheminių medžiagų ar abrazyvinių medžiagų, kurios gali pažeisti apdailą ar grūdintą stiklą.

6. Problemų sprendimas

• Ventiliatoriai nesisuka / RGB nešviečia:
  • Ensure all fan power cables are securely connected to the motherboard fan headers or a fan controller.
  • Verify that the D-RGB cables are correctly connected to the integrated controller or the motherboard's D-RGB header.
  • Check your motherboard's BIOS/UEFI settings or RGB software for fan speed and lighting control.
• Prastas oro srautas / aukšta temperatūra:
  • Clean all dust filters, especially the front mesh panel.
  • Įsitikinkite, kad ventiliatoriai yra tinkamai orientuoti, kad būtų užtikrintas optimalus oro įsiurbimas ir ištraukimas.
  • Verify that there are no obstructions to airflow inside the case, such as poorly managed cables.
• Front I/O Ports Not Functioning:
  • Check that all front panel connectors (USB, audio, power, reset) are correctly plugged into the corresponding headers on your motherboard.

7. Specifikacijos

8. Garantija ir palaikymas

Specific warranty details are not provided in this document. For warranty information, technical support, or further assistance, please visit the official Phanteks website or contact their customer service directly. Ensure you have your product model number (PH-EC400ATG_DWT01) and proof of purchase available when seeking support.

Oficialus „Phanteks“ Websvetainė: www.phanteks.com