1. Įvadas
This manual provides essential instructions for the safe and effective use of Inspire Sparkle Pearl Gold 4oz Airbrush Solvent. Please read this manual thoroughly before using the product to ensure proper application, optimal results, and user safety. Retain this manual for future reference.
2. Produktas baigtasview
Inspire Airbrush Sparkle Pearl Gold is a high-quality, solvent-based paint designed for airbrush applications. This product features large pearl particles that create a vivid sparkle effect, particularly under bright light. It is formulated to be applied over various base colors to achieve custom visual effects. The concentrated nature of this formulation helps reduce the number of coats required for airbrush artists. This product is supplied ready to use.
Pagrindinės funkcijos:
- Produkto tipas: Solvent-based airbrush paint.
- Efektas: Sparkle Pearl Gold finish.
- Apimtis: 4oz bottle.
- Taikymas: Designed for use with airbrush equipment.
- Universalumas: Can be applied over various base colors.
- Koncentracija: Formulated for reduced coat application.
- Paruošta naudoti: No thinning typically required.

Figure 1: Inspire Airbrush Paints 4oz bottle. This image displays the clear bottle containing the Inspire airbrush paint, with the brand logo and 'Airbrush Paints' label visible.

Figure 2: Inspire Airbrush Sparkle Pearl Gold bottle alongside a painted sample. The image shows the product bottle next to a small, curved panel painted with the Sparkle Pearl Gold, demonstrating the finish.
3. Saugos informacija
This product is a solvent-based paint. Adherence to safety guidelines is critical to prevent injury or adverse health effects.
Bendrosios saugos priemonės:
- Vėdinimas: Always use in a well-ventilated area or with appropriate respiratory protection (e.g., a respirator with organic vapor cartridges).
- Asmeninės apsaugos priemonės (AAP): Wear chemical-resistant gloves, safety glasses or goggles, and protective clothing to prevent skin and eye contact.
- Degumas: Keep away from heat, sparks, open flames, and hot surfaces. No smoking during use. Store in a cool, well-ventilated place.
- Nurijimas: Nenuryti. Prarijus, nedelsiant kreiptis į gydytoją.
- Kontaktas su oda: In case of skin contact, wash thoroughly with soap and water. If irritation persists, seek medical advice.
- Akių kontaktas: In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek immediate medical attention.
- Vaikai ir augintiniai: Laikyti vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
- Šalinimas: Turinį ir talpyklą išmeskite laikydamiesi vietinių, regioninių, nacionalinių ir tarptautinių taisyklių.
4. Sąranka
4.1 Workspace Preparation:
- Ensure your work area is clean, dust-free, and well-ventilated.
- Cover surfaces with drop cloths or protective sheeting to prevent overspray.
- Have all necessary tools and materials readily available, including your airbrush, air compressor, and cleaning supplies.
4.2 Surface Preparation:
- The surface to be painted must be clean, dry, and free of grease, oil, wax, and dust.
- For optimal results, apply Sparkle Pearl Gold over a suitable base color. A black base is often recommended to achieve the most vivid sparkle effect.
- Ensure any previous coats are fully cured according to their manufacturer's instructions.
4.3 Airbrush Preparation:
- Ensure your airbrush is thoroughly clean and free of any previous paint residues.
- For pearl paints, a nozzle size of 0.3mm or larger is generally recommended to prevent clogging due to the pearl particles.
- Connect your airbrush to a regulated air compressor. Set the air pressure to your preferred working pressure, typically between 20-30 PSI (1.4-2.1 bar), adjusting as needed for your specific airbrush and desired spray pattern.
4.4 Paint Preparation:
- Shake the Inspire Sparkle Pearl Gold bottle vigorously for at least 1-2 minutes to ensure the pearl particles are evenly dispersed.
- Pour the desired amount of paint into your airbrush cup.
- This product is ready to use; however, if further thinning is desired for specific effects or airbrush types, use a compatible solvent-based reducer sparingly. Always test on a scrap piece first.
5. Naudojimo instrukcijos
5.1 Application Technique:
- Hold the airbrush approximately 4-6 inches (10-15 cm) from the surface.
- Apply paint in light, even coats using smooth, overlapping passes. Avoid applying too much paint in one area to prevent runs or uneven pearl distribution.
- Maintain consistent air pressure and trigger control for a uniform finish.
5.2 Layering and Coverage:
- Allow each coat to flash off (become tacky but not fully dry) before applying the next. This typically takes a few minutes, depending on environmental conditions.
- Apply multiple thin coats until the desired sparkle effect and coverage are achieved. The concentrated formula is designed to reduce the total number of coats needed.
5.3 Drying and Curing:
- Drying times will vary based on film thickness, temperature, humidity, and airflow.
- Ensure the paint is fully dry before handling or applying subsequent layers.
5.4 Finishing:
- For durability and protection, it is recommended to apply a 1K or 2K clear coat over the Sparkle Pearl Gold once it has fully cured.
- Follow the clear coat manufacturer's instructions for application and curing.

Figure 3: Painted sample demonstrating the Inspire Sparkle Pearl Gold effect. This image shows a circular swatch with the 'CP' logo and 'CustomPaints.com' text, highlighting the metallic gold sparkle finish.
6. Priežiūra
6.1 Airbrush Cleaning:
- Immediately after each use, thoroughly clean your airbrush with a compatible solvent-based airbrush cleaner or lacquer thinner.
- Disassemble the airbrush as needed to ensure all paint residues are removed from the nozzle, needle, and paint cup.
- Proper cleaning prevents clogging and ensures optimal performance for future use.
6.2 Paint Storage:
- Ensure the bottle cap is tightly sealed after each use to prevent solvent evaporation and paint drying.
- Store the paint in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and open flames.
- Keep the bottle upright to prevent leaks.
7. Problemų sprendimas
Dažnos problemos ir sprendimai:
- Užsikimšimas:
- Ensure paint is thoroughly shaken before use.
- Use an airbrush with an appropriate nozzle size (0.3mm or larger).
- Clean the airbrush thoroughly, especially the nozzle and needle.
- If thinning, ensure the reducer is compatible and used sparingly.
- Netolygus purškimo modelis:
- Check air pressure settings; adjust for consistency.
- Ensure the airbrush is clean and free of blockages.
- Maintain a consistent distance and movement during application.
- Prastas sukibimas:
- Ensure the surface is properly cleaned and prepared (free of contaminants).
- Verify that any underlying coats are fully cured before application.
- Excessive Overspray:
- Sumažinti oro slėgį.
- Move the airbrush closer to the surface (within recommended distance).
8. Specifikacijos
| Prekės ženklas | Įkvėpti |
| Modelio numeris | SPL-04/INSP |
| Prekės svoris | 7 uncijos |
| Dydis | 4oz (1 count, pack of 1) |
| Baigti | Sparkle Pearl |
| Medžiaga | Urethane Basecoat |
| Aprėptis | Pilnas |
| Gamintojas | Custom Paints Inc |
| Pasiekiama pirmoji data | 8 m. birželio 2015 d |
9. Garantija ir palaikymas
For specific warranty information or technical support regarding your Inspire Sparkle Pearl Gold Airbrush Solvent, please contact Custom Paints Inc directly. Refer to the product packaging or the manufacturer's official websvetainėje rasite naujausią kontaktinę informaciją ir garantijos sąlygas.





