mooas MT-C1

mooas Cube Timer (Violet) Instruction Manual

Modelis: MT-C1

Įvadas

The mooas Cube Timer is a simple and intuitive gravity-sensor timer designed for various time management needs. Its cube design allows for quick and easy activation of pre-set timers by simply flipping the cube to the desired time face. This manual provides essential information for setting up, operating, and maintaining your mooas Cube Timer.

Violet mooas Cube Timer on a white surface

Image: The violet mooas Cube Timer, showing its compact design.

Sąranka

1. Akumuliatoriaus įdėjimas

The mooas Cube Timer requires 2 AAA batteries (not included). To install:

  1. Locate the battery compartment on the bottom of the timer.
  2. Atidarykite akumuliatoriaus skyriaus dangtelį.
  3. Įdėkite 2 AAA tipo baterijas, užtikrindami teisingą poliškumą (+/-).
  4. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.
Close-up of the yellow mooas Cube Timer showing the battery compartment and control switches

Image: Underside of the cube timer showing the battery compartment and alarm volume switch.

2. Signalo garsumo reguliavimas

The alarm volume can be adjusted using the switch located on the bottom of the timer. You can select between:

Naudojimo instrukcijos

1. Starting a Timer

The mooas Cube Timer is designed for ease of use. To start a timer:

  1. Ensure the timer is powered on (HI or LO volume selected).
  2. Simply turn the cube so that the side with your desired pre-set time (e.g., 5 min, 10 min, 20 min, 30 min) faces upwards.
  3. The timer will immediately begin counting down. A red light will blink to indicate the timer is active.
Illustration showing how to use the cube timer by flipping it to the desired time

Image: Visual guide on how to activate the timer by placing the desired time face up.

2. Pre-set Times (Violet Model)

The Violet mooas Cube Timer features the following pre-set time options:

Other color variants of the mooas Cube Timer may offer different time sets.

Multiple mooas Cube Timers in different colors, each showing different time settings

Image: Various cube timers demonstrating different time configurations available across models.

3. Skaitmeninis ekranas

A small digital display on the side of the timer shows the remaining time. This display is always oriented correctly for viewing, regardless of which side is facing up.

4. Stopping the Timer

When the timer reaches zero, the alarm will sound (if not set to OFF). To stop the alarm and reset the timer, simply turn the cube so that the side with the LCD screen or the side without any numbers faces upwards.

Savybės

Priežiūra

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Timer makes a rattling sound.Internal weight for gravity sensing.This is normal and not a defect. The internal weight is necessary for proper functioning.
Timer does not start or functions inconsistently.Low batteries, incorrect orientation, or internal mechanism issue.
  • Pakeiskite baterijas naujomis AAA tipo baterijomis.
  • Ensure the desired time face is placed firmly and correctly upwards.
  • To "reboot" the timer, turn it so the blank side (or LCD side) is up, wait for a beep, then turn it to the desired time.
Red light is distracting.Personal preference.The red light indicates the timer is active. If distracting, consider placing the timer in a position where the light is not directly visible, or covering the light with a small piece of opaque tape.

Specifikacijos

Dimensions of the mooas Cube Timer, showing 2.6 inches on each side

Image: Diagram illustrating the dimensions of the mooas Cube Timer.

Garantija ir palaikymas

For warranty information or product support, please refer to the packaging or contact mooas customer service directly. Keep your purchase receipt for warranty claims.

Susiję dokumentai - MT-C1

Preview „Mooas Multi Cube“ laikmatis MT-C2 naudotojo vadovas ir instrukcijos
Išsamus „Mooas Multi Cube“ laikmačio (MT-C2) naudotojo vadovas. Sužinokite, kaip nustatyti laikrodį, naudotis laikmačio funkcijomis, suprasti funkcijas ir laikytis saugos priemonių. Pateikiamos produkto specifikacijos.
Preview „Mooas“ kelių šešiakampių laikmačių MT-H7X620 naudotojo vadovas
„Mooas“ kelių šešiakampių laikmačių (MT-H7X620 modelis) naudotojo vadovas, kuriame išsamiai aprašomos šio šešiakampio skaitmeninio laikmačio funkcijos, veikimas, saugos įspėjimai ir trikčių šalinimas.
Preview „Mooas TC2“ virimo laikmačio ir žadintuvo naudotojo vadovas
Išsamus „Mooas TC2“ maisto gaminimo laikmačio ir žadintuvo naudotojo vadovas. Sužinokite apie jo funkcijas, kaip naudoti atgalinio ir skaičiavimo pirmyn režimus, nustatyti žadintuvus, pakeisti baterijas ir suprasti specifikacijas bei atsargumo priemones. Įtraukta trikčių šalinimo ir garantijos informacija.
Preview „Mooas“ kelių šešiakampių laikrodžių laikmačio (2-os kartos) naudotojo vadovas
„Mooas Multi-Hexagon“ laikrodžio laikmačio (2-os kartos) naudotojo vadovas, kuriame išsamiai aprašomos jo savybės, veikimas ir specifikacijos, skirtos įvairiems laiko valdymo poreikiams.
Preview Mooas Mini Automatic Multi Flip Clock MT-CF1 User Manual
Official user manual for the Mooas Mini Automatic Multi Flip Clock (Model MT-CF1). Learn how to set time, alarm, and use its features. Includes specifications, components, and precautions.
Preview „Mooas“ LED skaitmeninio veidrodinio laikrodžio naudotojo vadovas
„Mooas“ LED skaitmeninio veidrodinio laikrodžio naudotojo vadovas, kuriame išsamiai aprašomos funkcijos, naudojimas, žadintuvo nustatymai, temperatūros rodymas ir atsargumo priemonės. Apima gaminio specifikacijas ir naudojimo instrukcijas.