Įvadas
This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.
Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.
Saugos instrukcijos
To prevent injury or damage to the chair, please observe the following safety guidelines:
- Ensure all components are securely fastened before use. Regularly check and tighten screws.
- Do not exceed the maximum weight capacity of the chair (refer to specifications).
- Venkite stovėti ant kėdės arba naudoti ją kaip laiptelį.
- Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
- Kėdę statykite ant lygaus paviršiaus, kad ji neapvirstų.
- Laikykite pakavimo medžiagas vaikams nepasiekiamoje vietoje, kad išvengtumėte uždusimo pavojaus.
- Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.
Komponentų sąrašas
Prieš pradėdami surinkimą, patikrinkite, ar visos dalys yra ir nepažeistos. Jei trūksta kokių nors dalių arba jos pažeistos, netęskite surinkimo ir susisiekite su klientų aptarnavimo tarnyba.
- Atlošas
- Sėdynės pagalvėlė
- Porankiai (kairysis ir dešinysis)
- Mechanizmo plokštė (po sėdyne)
- Dujų kėlimo cilindras
- Dujų keltuvo dangtis
- Penkių žvaigždučių bazė
- Ratukai (5 vnt.)
- Aparatūra (varžtai, poveržlės, šešiakampis raktas)
Surinkimo instrukcijos
Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Step 1: Attach Casters to the Base
Įkiškite kiekvieną iš penkių ratukų į skylutes kiekvienos penkių žvaigždučių pagrindo kojelės gale. Tvirtai spauskite, kol jie užsifiksuos.
Step 2: Insert Gas Lift
Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.
Step 3: Attach Mechanism Plate to Seat
Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.
Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.
Step 4: Attach Armrests to Seat and Backrest
Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.
5 veiksmas: prijunkite sėdynės mazgą prie dujų keltuvo
Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.
Vaizdas: priekis view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.
Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.
Naudojimo instrukcijos
Your TecTake office chair offers several adjustments to customize your seating experience:
Aukščio reguliavimas
To adjust the seat height, locate the lever on the right side, beneath the seat.
- Norėdami pakelti sėdynę: Pakelkite svirtį, kartu atitraukdami svorį nuo sėdynės. Sėdynė pakils automatiškai. Atleiskite svirtį pasiekę norimą aukštį.
- Norėdami nuleisti sėdynę: Lift the lever while remaining seated. The seat will lower. Release the lever at the desired height.
Tilt Function and Lock
The chair features a tilt mechanism allowing the backrest and seat to recline together.
- To enable tilt: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
- To lock tilt: Push the lever inwards towards the chair. The chair will lock in its upright position.
Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.
Pasvirimo įtempimo reguliavimas
Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.
- To increase tension (harder to recline): Pasukite rankenėlę pagal laikrodžio rodyklę.
- To decrease tension (easier to recline): Pasukite rankenėlę prieš laikrodžio rodyklę.
Priežiūra
Reguliarus valymas padės prailginti biuro kėdės tarnavimo laiką ir išlaikyti jos išvaizdą.
- Valymas: Dirbtinės odos apmušalus nuvalykite minkšta, sausu skudurėliu.amp šluoste. Įsisenėjusioms dėmėms naudokite švelnų muilo tirpalą ir nedelsdami nusausinkite. Venkite abrazyvinių valiklių, tirpiklių ar stiprių cheminių medžiagų, nes jos gali pažeisti medžiagą.
- Rėmas ir pagrindas: Metalines ir plastikines dalis nuvalykite reklaminiu valikliuamp audinys.
- Ratukai: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
- Techninė įranga: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
- Venkite perkrovos: Do not exceed the chair's stated weight capacity.
Trikčių šalinimas
Jei kyla problemų dėl kėdės, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
- Kėdės girgždesys:
Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
- Kėdės aukštis nereguliuojamas:
Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.
- Kėdė nestabili / svirduliuoja:
Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.
- Ratukai rieda nelygiai:
Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.
Specifikacijos
| Prekės ženklas | TecTake |
| Modelio numeris | 800747 |
| Spalva | Juoda |
| Medžiaga | Polyurethane, Faux Leather, Pine Wood (frame) |
| Prekės svoris | 16.7 kilogramo |
| Rekomenduojamas naudojimas | Biuras |
| Ypatinga funkcija | Tvirta konstrukcija |
Matmenys (apytiksliai)
Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).
- Overall Height: 115-123 cm
- Seat Height (adjustable): 47-55 cm
- Sėdynės plotis: 55 cm
- Sėdynės gylis: 52 cm
- Backrest Width: 48 cm
- Armrest Height (from seat): 68.5-76.5 cm
- Base Diameter: 67 cm
Garantija ir palaikymas
Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.
Galite aplankyti TecTake Brand Store on Amazon Norėdami gauti daugiau informacijos.
