Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Įvadas

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Saugos informacija

• Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Prietaisą laikykite vaikams nepasiekiamoje vietoje.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x tvirtinimo laikiklis
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Produktas baigtasview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

1 paveikslas: Priekyje view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Pagrindiniai komponentai:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED indikatorius: Provides status feedback (e.g., detection, low battery).
• Baterijų skyrius: Talpina maitinimo šaltinį.
• Tvirtinimo taškai: For secure installation on a wall.
• Tamper jungiklis: Triggers an alarm if the sensor cover is opened.

5. Sąranka

5.1. Akumuliatoriaus įdėjimas

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Jutiklio montavimas

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Naudokite tvirtinimo kronšteiną kaip šabloną, norėdami pažymėti varžtų vietas ant sienos.
3. Pažymėtose vietose išgręžkite skyles ir įstatykite sieninius kaiščius.
4. Pritvirtinkite tvirtinimo laikiklį prie sienos naudodami pateiktus varžtus.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Jutiklio valdymas

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED indikatoriaus būsena

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Nėra šviesos: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view o ne tiesiai į ją.

7. Priežiūra

7.1. Valymas

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Baterijos keitimas

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Reguliarūs patikrinimai

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Problemų sprendimas

9. Specifikacijos

• Prekinis ženklas: Intelbros
• Modelis: IVP2000SF
• Maitinimo šaltinis: Maitinamas baterijomis
• Baterijos tipas: Šarminis
• Montavimo tipas: Sieninis laikiklis
• Suderinami įrenginiai: Intelbras security systems and smart home hubs
• Gaminio matmenys: Apytiksliai 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 colio)
• Aptikimo metodas: Pasyvus infraraudonasis (PIR)
• Aptikimo diapazonas: Iki 12 metrų (39 pėdų)
• Aptikimo kampas: Maždaug 90 laipsnių
• Veikimo aplinka: Naudoti tik patalpose

10. Informacija apie garantiją

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

11. Parama

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Websvetainė: Apsilankykite oficialioje „Intelbras“ svetainėje websvetainė, kurioje rasite pagalbos išteklių, DUK ir kontaktinės informacijos.
• Telefonas: Refer to the contact section on the Intelbras webvietinės pagalbos numerių svetainė.