BESTTEN LD-3012

BESTEN 15 Amp Decorator Receptacle Outlet Instruction Manual

Modelis: LD-3012

Įvadas

This instruction manual provides important information for the safe installation, operation, and maintenance of your BESTTEN 15 Amp Decorator Receptacle Outlet. Please read this manual thoroughly before installation and keep it for future reference.

BESTEN 15 Amp Decorator Receptacle Outlet with wallplate

Image: BESTTEN 15 Amp Decorator Receptacle Outlet with included wallplate, showcasing its clean design and UL listing.

Saugos informacija

ĮSPĖJIMAS: Elektros smūgio arba gaisro pavojus.

Kas yra dėžutėje

Specifikacijos

Modelio numerisLD-3012
Elektrinis įvertinimas15A/125V/1875W
Gaminio matmenys4.5"L x 1.29"W x 0.04"D (Outlet: 4.06"H x 1.29"W x 0.98"D)
MedžiagaPolikarbonatas (PC)
SpalvaBaltas
SertifikataiUL/cUL įtraukta į sąrašą
Product dimensions of BESTTEN 15 Amp Decorator Receptacle Outlet and wallplate

Image: Detailed product dimensions for the BESTTEN 15 Amp Decorator Receptacle Outlet and its accompanying wallplate.

Montavimo instrukcijos

  1. Išjungti maitinimą: Locate the circuit breaker or fuse box controlling the outlet you intend to replace or install. Turn off the power to that circuit. Verify power is off using a voltage testeris.
  2. Nuimkite seną lizdą (jei taikoma): Unscrew and carefully remove the old wallplate and outlet from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
  3. Paruoškite laidus: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure wires are straight and free of nicks.
  4. Laidų jungtys: Connect the wires to the new BESTTEN receptacle. This outlet supports both side wiring and quick back push-in wiring.
    • Įžeminimo laidas (žalias arba plikas varis): Connect to the green grounding screw.
    • Neutralus laidas (baltas): Connect to the silver terminal screws or use the back push-in holes for neutral.
    • Karšta viela (juoda): Connect to the brass terminal screws or use the back push-in holes for hot.
    Diagram showing side wiring and back wiring options for the BESTTEN 15 Amp Decorator Receptacle Outlet

    Image: Wiring diagram illustrating both side wiring (for 12 AWG & 14 AWG) and back wiring (for 14 AWG only) methods for the receptacle.

    Note: For split receptacle applications, break off the tabs between the hot terminals to allow two-circuit conversion.

  5. Mount the Outlet: Carefully fold the wires into the electrical box. Secure the receptacle to the electrical box using the provided mounting screws. The plaster ears can be broken off for flush alignment if needed.
  6. Sieninės plokštės montavimas: Attach the decorator wallplate over the installed receptacle using the provided screws.
  7. Atkurti maitinimą: Įjunkite maitinimą grandinės pertraukikliu arba saugiklių dėžute.
  8. Testas: Plug a device into the outlet to ensure it is functioning correctly.

Operacija

The BESTTEN 15 Amp Decorator Receptacle Outlet functions as a standard electrical outlet. Once properly installed and powered, simply insert the plug of your electrical device into the receptacle slots. Ensure the plug is fully inserted for a secure connection.

Priežiūra

Trikčių šalinimas

Garantija ir palaikymas

BESTTEN products are designed for durability and performance. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Susiję dokumentai - LD-3012

Preview BESTTEN 15A standartinio dekoratyvinio lizdo montavimo instrukcijos
Detailed installation instructions for BESTTEN 15A Standard Decor Receptacle Outlet (Models LD-3012, LD-3012TR), including safety warnings, wiring diagrams, specifications, and warranty information.
Preview BESTTEN 15A standartinio dekoratyvinio lizdo montavimo instrukcijos
BESTTEN 15A standartinio dekoratyvinio lizdo montavimo instrukcijos, įskaitant laidų schemas, specifikacijas ir garantijos informaciją.
Preview BESTTEN LD-3013/LD-3013TR 20A Standard Decor Receptacle Outlet Installation Instructions
Official installation instructions for BESTTEN's 20A Standard Decor Receptacle Outlet models LD-3013 and LD-3013TR. Includes wiring diagrams, specifications, warnings, and warranty information.
Preview BESTTEN 4-Port USB Wall Receptacle Outlet (LD-U002) - Installation and Specifications
Detailed information on the BESTTEN 4-Port USB Wall Receptacle Outlet (Model LD-U002), including specifications, features, installation guide, wiring diagram, and warranty.
Preview „BESTTEN USP-LS01“ vieno poliaus dekoravimo svirties tylaus jungiklio montavimo vadovas
BESTTEN USP-LS01 15 įrengimo ir laidų sujungimo instrukcijos Amp 120/277 voltų kintamosios srovės dekoravimo jungiklio tylusis jungiklis. Pridedami saugos įspėjimai ir informacija apie garantiją.
Preview BESTTEN 15A standartinio dekoratyvinio lizdo montavimo instrukcijos
Step-by-step installation guide for the BESTTEN 15A Standard Decor Receptacle Outlet, including safety warnings, installation steps, specifications, and warranty information.