EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Įvadas

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai. Jei kurių nors daiktų trūksta arba jie pažeisti, susisiekite su pardavėju.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Low-profile Bracket (for small form factor PCs)
• 1 x Atsuktuvas
• Tvirtinimo varžtai
• 1 x Driver CD (or download instructions)

3. Sąranka ir diegimas

3.1 Aparatinės įrangos diegimas

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Paruoškite savo kompiuterį: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Įdėkite tinklo plokštę: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Apsaugokite kortelę: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile laikiklis.
6. Pritvirtinkite antenas: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Uždaryti kompiuterio korpusą: Replace the side panel of your PC case and reconnect the power cord.

3.2 Tvarkyklės diegimas

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Using the Driver CD: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Tvarkyklių atsisiuntimas: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel websvetainė arba EDUP websvetainė (szedup.com). Ieškokite drivers compatible with the Intel AX200 chipset.
3. Diegimo procesas: Paleiskite atsisiųstą tvarkyklės sąrankos programą files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Naudojimo instrukcijos

4.1 Prisijungimas prie „Wi-Fi“.

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Iš sąrašo pasirinkite norimą „Wi-Fi“ tinklą.
3. Spustelėkite „Prisijungti“ ir, jei būsite paraginti, įveskite tinklo saugos raktą (slaptažodį).
4. Dabar jūsų kompiuteris turėtų būti prijungtas prie „Wi-Fi“ tinklo.

4.2 „Bluetooth“ įrenginių prijungimas

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Eikite į „Windows“ nustatymus > Įrenginiai > „Bluetooth“ ir kiti įrenginiai.
2. Įsitikinkite, kad „Bluetooth“ įjungtas.
3. Spustelėkite „Pridėti „Bluetooth“ arba kitą įrenginį“ ir pasirinkite „Bluetooth“.
4. Įjunkite „Bluetooth“ įrenginį į poravimo režimą.
5. Pasirinkite savo įrenginį iš sąrašo ir vykdykite visus ekrane pateikiamus nurodymus, kad užbaigtumėte susiejimą.

5. Specifikacijos

6. Problemų sprendimas

If you encounter issues with your EDUP network card, refer to the following common solutions:

• Neaptiktas „Wi-Fi“ arba „Bluetooth“ ryšys:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP websvetainę.
• Silpnas „Wi-Fi“ signalas arba mažas greitis:
  • Adjust the position of the external antennas for better reception.
  • Įsitikinkite, kad jūsų maršrutizatorius palaiko „Wi-Fi 6“ (802.11ax), kad užtikrintumėte optimalų našumą.
  • Patikrinkite, ar netrukdo kiti elektroniniai prietaisai.
  • Atnaujinkite savo maršrutizatoriaus programinę-aparatinę įrangą.
• „Bluetooth“ neveikia:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Įsitikinkite, kad „Windows“ nustatymuose įjungtas „Bluetooth“.
  • Reinstall the Bluetooth driver.

7. Garantija ir palaikymas

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.