Behringer TD-3-SR Analog Bass Line Synthesizer User Manual

1. Įvadas

This manual provides detailed instructions for the setup, operation, and maintenance of your Behringer TD-3-SR Analog Bass Line Synthesizer. Please read this manual thoroughly to ensure proper use and to fully explore the capabilities of your instrument. Keep this manual for future reference.

2. Saugos instrukcijos

• Maitinimas: Naudokite tik nurodytą maitinimo adapterį. Įsitikinkite, kad įtampatagatitinka jūsų regiono reikalavimus.
• Vanduo ir drėgmė: Do not expose the unit to rain, moisture, or any liquids. Avoid placing objects filled with liquids on the unit.
• Vėdinimas: Užtikrinkite tinkamą vėdinimą. Neužblokuokite ventiliacijos angų.
• Šiluma: Nestatykite šalia šilumos šaltinių, tokių kaip radiatoriai, šildytuvai, viryklės ar kiti prietaisai (įskaitant ampkeltuvai), kurie gamina šilumą.
• Valymas: Valykite tik sausa šluoste.
• Aptarnavimas: Nemėginkite patys aptarnauti šio gaminio. Visą techninę priežiūrą patikėkite kvalifikuotam aptarnavimo personalui.

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai:

• Behringer TD-3-SR Analog Bass Line Synthesizer
• Maitinimo adapteris
• USB kabelis
• Greitos pradžios vadovas

4. Produktas baigtasview

4.1 Priekinio skydelio valdikliai

4.1 paveikslas: The Behringer TD-3-SR Analog Bass Line Synthesizer, showing the complete front panel with all controls and buttons.

The front panel of the TD-3-SR is organized into several sections for intuitive control over sound generation and sequencing:

• VCO Section: Controls for the Voltage Controlled Oscillator, including TUNE ir Bangų forma (Sawtooth/Square).
• VCF Section: Controls for the Voltage Controlled Filter, featuring ATKREIPTA, ATSILIEPIMAS, VOKAS, SKIRIMO, ir AKCENTAS.
• Sequencer Controls: Buttons and switches for pattern programming and playback, including TEMPO, KELIO / PAVYZDŽIO GRUPĖ, REŽIMAS (Play/Write), PITCH REŽIMAS, FUNKCIJA, START/STOP, BARAS, PASIRINKĖJAS, DEL, INS, CH, KOPIJUOT, PASTA, ŽINGSNIS buttons (1-8, 0, 100, 200), AKCENTAS, SKAIDRĖ, ir SYNC.
• Iškraipymo sekcija: An integrated distortion effect with an ĮJUNGTA/IŠJUNGTA jungiklis, TONAS, ir LYGIS valdikliai.
• Garsumo valdymas: A master TOMAS knob for output level adjustment.

4.2 paveikslas: Iš arti view of the Distortion and Volume sections on the Behringer TD-3-SR, highlighting the ON/OFF switch, TONE, LEVEL, and master VOLUME controls.

4.2 Galinio skydelio jungtys

4.3 paveikslas: The rear panel of the Behringer TD-3-SR, displaying all input and output connections for audio, MIDI, USB, and power.

The rear panel provides essential connectivity for integrating the TD-3-SR into your studio or live setup:

• Sinchronizuoti: 3.5mm input for external clock synchronization.
• CV OUT: 3.5mm output for controlling external analog gear with control voltage.
• IŠĖJIMO VARTAI: 3.5mm output for sending gate signals to external analog gear.
• TELEFONAI: 3.5 mm stereo išvestis ausinėms.
• IŠĖJIMAS: 1/4" mono output for connecting to mixers, audio interfaces, or ampgelbėtojai.
• MIDI ĮĖJIMAS/IŠĖJIMAS/PERĖJIMAS: 5-pin DIN connectors for MIDI communication with other devices.
• USB: USB-B port for MIDI over USB and firmware updates.
• POWER DC INPUT: Connection for the included power adapter (9V DC, 300mA).

5. Sąranka

1. Maitinimo jungtis: Prijunkite pridedamą maitinimo adapterį prie MAITINIMO DC ĮVESTIS on the rear panel and then to a suitable power outlet.
2. Garso jungtis: Prijunkite IŠVADA jack to your mixer, audio interface, or amplifier using a 1/4" TS cable. For private monitoring, connect headphones to the TELEFONAI domkratas.
3. MIDI/USB jungtis (neprivaloma): If integrating with other MIDI devices, connect MIDI cables to the MIDI ĮVESTIS/IŠVESTIS/PERĖJIMAS ports. For computer connectivity, use the supplied USB cable to connect the USB prievadą prie savo kompiuterio.
4. Maitinimas: Ensure all connections are secure, then flip the power switch located next to the DC input to the 'ON' position.

6. Pagrindinė operacija

6.1 Generating a Basic Sound

1. Turn the master TOMAS knob to a low setting.
2. Nustatykite REŽIMAS switch to 'PLAY'.
3. Paspauskite START/STOP button to begin playback of a default pattern.
4. Sureguliuokite TUNE knob in the VCO section to change the pitch.
5. Pasirinkite a Bangų forma (Sawtooth or Square) using the switch in the VCO section.
6. Experiment with the VCF controls: ATKREIPTA (filter frequency), ATSILIEPIMAS (filter emphasis), VOKAS (filter modulation depth), SKIRIMO (envelope decay time), and AKCENTAS (accent level).
7. Adjust the master TOMAS iki patogaus klausymo lygio.

6.2 Using the Distortion Effect

6.1 paveikslas: The Distortion section, showing the ON/OFF switch and TONE/LEVEL knobs.

The TD-3-SR includes a built-in distortion effect to add grit and character to your bass lines.

1. To activate the distortion, set the IŠKRAIŠIMAS switch to 'ON'.
2. Sureguliuokite TONAS rankenėlę, skirtą iškraipyto garso dažnio turiniui formuoti.
3. Naudokite LYGIS knob to control the intensity of the distortion effect.

7. Sequencer Operation

7.1 paveikslas: Close-up of the sequencer section, showing step buttons, function buttons, and pattern group selector.

The TD-3-SR features a 16-step sequencer for creating and playing bass lines.

7.1 Selecting a Pattern Group

• Naudokite KELIO / PAVYZDŽIO GRUPĖ rotary switch to select one of the four available pattern groups (I, II, III, IV). Each group contains multiple patterns.

7.2 Entering Write Mode

• To program a pattern, set the REŽIMAS switch to 'WRITE'. The unit will stop playback if it was running.

7.3 Step Entry

1. In 'WRITE' mode, press the ŽINGSNIS buttons (1-8) to enter notes. Each press advances the sequencer to the next step.
2. Naudokite DEL button to delete the note at the current step.
3. Naudokite INS button to insert a step before the current step.
4. Norėdami pridėti AKCENTAS or SKAIDRĖ to a step, press the corresponding button while the step is active or immediately after entering a note.

7.4 Playing Patterns

1. Nustatykite REŽIMAS switch to 'PLAY'.
2. Paspauskite START/STOP button to begin playback of the selected pattern.
3. Sureguliuokite TEMPO knob to change the playback speed.
4. The SYNC switch allows internal or external clock synchronization.

8. MIDI ir USB jungtys

The TD-3-SR offers comprehensive MIDI and USB connectivity for integration with other musical equipment and computers.

• MIDI IN: Receives MIDI data for controlling the TD-3-SR's notes, parameters, and clock.
• MIDI OUT: Transmits MIDI data generated by the TD-3-SR, including sequencer patterns and knob movements.
• MIDI PER: Passes through incoming MIDI data from the MIDI IN port to another device.
• USB MIDI: Connect the TD-3-SR to a computer via the USB-B port. This allows for MIDI control from a Digital Audio Workstation (DAW) and enables firmware updates. The TD-3-SR will appear as a standard MIDI device on your computer.

9. Priežiūra

• Valymas: Use a soft, dry, lint-free cloth to clean the exterior of the unit. Do not use abrasive cleaners, solvents, or waxes.
• Saugykla: When not in use for extended periods, store the TD-3-SR in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
• Firmware atnaujinimai: Reguliariai tikrinkite „Behringer“ websvetainėje, kurioje pateikiami galimi programinės įrangos atnaujinimai, užtikrinantys optimalų našumą ir prieigą prie naujų funkcijų.

10. Problemų sprendimas

• Nėra garso išvesties:
  • Check power connection and ensure the unit is turned on.
  • Patikrinkite, ar garso kabeliai tinkamai prijungti prie IŠVADA and your audio system.
  • Ensure the master TOMAS knob is turned up.
  • If using headphones, check the headphone connection and volume.
  • Ensure a pattern is playing and the REŽIMAS switch is set to 'PLAY'.
• Sequencer Not Playing/Responding:
  • Patikrinkite, ar REŽIMAS switch is set to 'PLAY'.
  • Užtikrinti, START/STOP mygtukas buvo paspaustas.
  • If using external sync, verify the external clock source is active and the SYNC switch is set correctly.
• MIDI valdymo problemos:
  • Verify MIDI cables are securely connected to the correct MIDI IN/OUT prievadai.
  • Check MIDI channel settings on both the TD-3-SR and the controlling device.
  • If using USB MIDI, ensure the USB cable is connected and the TD-3-SR is recognized by your computer/DAW.

11. Specifikacijos

12. Garantija ir palaikymas

Behringer products are designed for reliability and performance. This product is covered by a limited warranty. For detailed warranty terms and conditions, product registration, and technical support, please visit the official Behringer websvetainėje arba susisiekite su vietiniu platintoju. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį prašymą.