Canarm Unity 36-inch 4-Blade White Ceiling Fan with Light

1. Saugos informacija

Read all instructions carefully before beginning installation. Failure to follow these instructions may result in electrical shock, fire, or personal injury.

• Prieš montuodami ar atlikdami techninę priežiūrą, visada atjunkite maitinimą nuo grandinės pertraukiklio arba saugiklių dėžutės.
• Visa instaliacija turi atitikti nacionalinius ir vietinius elektros kodeksus. Jei nesate susipažinę su instaliacija, pasitarkite su kvalifikuotu elektriku.
• Ensure the installation site can support the weight of the fan (approximately 3.53 kg).
• Nenaudokite ventiliatoriaus su pažeistomis mentėmis ar korpusu.
• Maintain a minimum clearance of 7 feet (2.1 meters) from the floor to the bottom edge of the fan blades.
• Nekiškite jokių daiktų į ventiliatoriaus menčių kelią.

2. Pakuotės turinys

Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Variklio korpuso mazgas
• Fan Blades (4) - Reversible white/bleached oak
• Peilių laikikliai (4)
• Žemyn
• Baldakimas
• Mounting Bracket
• Šviesos komplekto surinkimas
• Mushroom Globe Glass
• Traukimo grandinės (2)
• Aparatūros paketas (varžtai, poveržlės, vielinės veržlės)

2.1 pav. Baigtaview of the Canarm Unity Ceiling Fan with Light, displaying the motor housing, four blades, and the central mushroom globe light.

3. Sąranka ir diegimas

Rekomenduojamas profesionalus montavimas. Prieš tęsdami įsitikinkite, kad maitinimas yra atjungtas nuo grandinės pertraukiklio.

3.1 Ventiliatoriaus montavimas

1. Pritvirtinkite tvirtinimo laikiklį prie lubų jungiamosios dėžutės. Įsitikinkite, kad jungiamoji dėžutė yra tvirtai pritvirtinta prie pastato konstrukcijos ir gali atlaikyti ventiliatoriaus svorį.
2. Feed the electrical wires from the junction box through the center hole of the mounting bracket.
3. Attach the downrod to the motor housing, ensuring all screws are tightened.
4. Carefully lift the fan assembly and hang it from the mounting bracket using the hook provided on the downrod.

3.2 Elektros jungtys

Prijunkite ventiliatoriaus elektros laidus prie buitinės elektros instaliacijos pagal šiuos nurodymus:

• Connect the green/bare copper wire (ground) from the fan to the ground wire from the junction box.
• Connect the white wire (neutral) from the fan to the white wire from the junction box.
• Connect the black wire (hot for fan) from the fan to the black wire from the junction box.
• Connect the blue wire (hot for light) from the fan to the black or blue wire from the junction box (if separate light switch).
• Secure all connections with wire nuts and ensure no loose strands of wire are exposed.

3.3 Ventiliatoriaus menčių pritvirtinimas

1. Attach each blade to a blade bracket using the provided screws. Ensure the desired blade finish (white or bleached oak) is facing downwards.
2. Secure each blade assembly to the motor housing using the screws provided. Ensure all screws are tight.

Figure 3.3: Images showing the blade attachment points on the motor housing (left) and the assembled blades from a top-down perspective (right).

3.4 Apšvietimo komplekto montavimas

1. Connect the light kit wires to the corresponding wires from the fan motor housing (usually white to white, blue to black).
2. Secure the light kit assembly to the bottom of the motor housing with the provided screws.
3. Install the appropriate light bulb(s) (not included) into the sockets.
4. Carefully attach the mushroom globe glass to the light kit by twisting or securing with screws, depending on the design.

3.4 pav. Iš arti view of the fan's light kit with the mushroom globe glass.

3.5 Paskutiniai žingsniai

1. Carefully slide the canopy up against the ceiling and secure it with the provided screws.
2. Atkurkite maitinimą prie grandinės pertraukiklio.

4. Naudojimo instrukcijos

The Canarm Unity ceiling fan is operated by two pull chains.

• Ventiliatoriaus greičio valdymas: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through the three available speeds (High, Medium, Low) and Off.
• Šviesos valdymas: The second pull chain controls the light. Pull the chain to turn the light On or Off.
• Blade Reversal: To change the direction of the fan blades (e.g., for summer cooling or winter heat circulation), locate the slide switch on the motor housing. With the fan off, slide the switch to the opposite position. This fan features reversible white/bleached oak blades.

Figure 4.1: The Canarm Unity fan installed, demonstrating its function within a living space.

5. Priežiūra

Reguliarus valymas užtikrina optimalų veikimą ir prailgina lubų ventiliatoriaus tarnavimo laiką.

• Valymas: Reguliariai valykite ventiliatoriaus mentes ir variklio korpusą minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Priveržimo varžtai: Check all screws on the blade attachments and mounting hardware annually. Tighten any loose screws to prevent wobbling or noise.
• Lemputės keitimas: Disconnect power before replacing light bulbs. Allow bulbs to cool before handling. Use bulbs of the correct wattage and type as specified in the fan's electrical ratings.

6. Problemų sprendimas

Prieš bandydami atlikti bet kokius remonto darbus, įsitikinkite, kad maitinimas yra atjungtas nuo grandinės pertraukiklio.

7. Specifikacijos

8. Garantija ir palaikymas

This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions.

For technical assistance, missing parts, or warranty claims, please contact Canarm customer support. Contact information can typically be found on the manufacturer's websvetainėje arba ant produkto pakuotės.

Išsaugokite šį vadovą, kad galėtumėte pasinaudoti ateityje.