1. Įvadas
The DAB FEKA 300 MA is a robust submersible pump designed for efficient drainage and lifting of clear, grey, or rainwater in various settings, including domestic and residential environments. This pump is capable of handling moderately dirty water containing solids up to 25mm in diameter. Its versatile design makes it suitable for both fixed and mobile installations. The FEKA 300 MA features an integrated float switch for automatic operation and is engineered to run dry for up to 1 minute without damage.
2. Saugos informacija
- Always disconnect the pump from the power supply before any installation, maintenance, or cleaning operations.
- Ensure the power cable is intact and free from damage. Do not use the pump if the cable is damaged.
- Siurblys turi būti tinkamai įžemintas.
- Do not operate the pump in explosive atmospheres or with flammable liquids.
- Laikykite vaikus ir neįgaliotus asmenis atokiau nuo darbo zonos.
- Ensure the pump is fully submerged during operation to prevent overheating, except for the specified 1-minute dry run capability.
3. Sąranka
- Išpakavimas: Carefully remove the pump and all accessories from the packaging. Inspect for any signs of damage.
- Iškrovimo jungtis: Connect a suitable discharge hose to the pump's outlet. Ensure a secure, watertight connection. The pump is designed with a discharge outlet for easy hose attachment.
- Plūdinio jungiklio reguliavimas: The pump features an integrated float switch for automatic operation. Adjust the cable length of the float switch to set the desired start and stop levels for the pump. The pump will start when the water level rises and lift the float, and stop when the water level drops and the float falls.
- Vieta: Place the pump on a stable, flat surface in the area to be drained. Ensure the suction grille is clear of obstructions.
- Maitinimo jungtis: Connect the pump to a suitable power outlet. Ensure the power supply matches the pump's requirements (230V ~ 50Hz).
4. Naudojimo instrukcijos
- Automatinis veikimas: Once connected to power and placed in water, the pump will automatically start when the water level reaches the activation point of the float switch. It will continue to pump until the water level drops below the deactivation point.
- Rankinis valdymas (jei taikoma): If your model supports manual operation (without a float switch or with a manual override), ensure the pump is continuously monitored to prevent dry running for extended periods.
- Stebėjimas: Periodically check the pump's operation and the water level to ensure proper functioning.
5. Priežiūra
- Reguliarus valymas: Periodically clean the pump's suction grille to remove any debris, leaves, or solids that may obstruct water intake.
- Patikra: Regularly inspect the power cable, float switch, and pump body for any signs of wear, damage, or corrosion.
- Saugojimas žiemą: If storing the pump for an extended period, especially in freezing temperatures, ensure it is thoroughly cleaned, drained of all water, and stored in a dry, frost-free location.
- Profesionalus aptarnavimas: For any internal repairs or complex issues, contact a qualified service technician.
6. Problemų sprendimas
- Siurblys neįsijungia: Check the power supply, ensure the plug is securely inserted, and verify that the float switch is not stuck in the 'off' position (if applicable).
- Pump runs but no water is discharged: Check for blockages in the suction grille or discharge hose. Ensure the water level is sufficient for the pump to operate.
- Reduced flow rate: Clean the suction grille and check the discharge hose for kinks or partial blockages.
- Pump stops unexpectedly: Check for thermal overload protection activation (allow to cool down). Verify the float switch position.
7. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Gamintojas | DAB SIurbliai |
| Modelio numeris | FEKA 300 |
| Gaminio matmenys | 18.9 x 30.3 x 32.9 cm |
| Prekės svoris | 4.6 kilogramo |
| Spalva | Juoda / žalia |
| Stilius | Povandeninis |
| Material (Pump Body) | Technopolimeras |
| Material (Motor Casing/Shaft) | AISI 304 Stainless Steel / AISI 431 Steel |
| Maitinimo šaltinis | Su laidu elektra |
| Flow Rate (Min/Max) | 1 m³/h to 16 m³/h |
| Max galva | 7.5 metrai |
| Maksimalus panardinimo gylis | 7 Meters (with adequate cable length) |
| Skysčio tipas | Wastewater, Dirty Water, Rainwater |
| Free Passage for Solids | 25 mm |
| Minimum Suction Level | 38 mm |
| Liquid Temperature (Domestic Use) | +0°C iki +35°C |
| Liquid Temperature (Other Uses) | +0°C iki +50°C |
| Variklio apsaugos įvertinimas | IP 68 |
8. Garantija ir palaikymas
Specific warranty details and support contact information are typically provided with the product packaging or on the manufacturer's official website. Please refer to the documentation included with your purchase for precise warranty terms and conditions. For technical assistance or service inquiries, contact DAB PUMPS customer support.
9. Produktų vaizdo įrašai
No relevant product videos from the seller were found for this specific model in the provided data. Please refer to the manufacturer's websvetainėje arba produkto puslapyje, kur rasite visus galimus vaizdo įrašų išteklius.
