HP ProLiant DL380 Gen10 Server User Manual

1. Įvadas

This manual provides essential information for the installation, operation, and maintenance of your HP ProLiant DL380 Gen10 server. Please read this document thoroughly before using the server to ensure proper functionality and safety.

2. Saugos informacija

Kad išvengtumėte sužalojimų ir įrangos sugadinimo, laikykitės šių saugos priemonių:

• Ensure the server is connected to a properly grounded power outlet.
• Do not operate the server with covers removed unless performing maintenance as instructed.
• Venkite užkimšti ventiliacijos angas, kad išvengtumėte perkaitimo.
• Disconnect all power cords before moving or servicing the server.
• Handle internal components with care, especially when installing or removing modules.
• Wear an anti-static wrist strap when handling internal components to prevent electrostatic discharge (ESD) damage.

3. Pakuotės turinys

Išpakuodami patikrinkite, ar yra visi komponentai:

• HP ProLiant DL380 Gen10 Server Unit
• Maitinimo laidai (kiekis gali skirtis)
• Rack Mounting Kit (if included with your configuration)
• Dokumentacija (šis vadovas, garantijos informacija)

4. Aparatūra baigtaview

4.1 Priekinis skydelis

The front panel provides access to drive bays, status indicators, and the power button.

4.1 paveikslas: Priekyje view of the HP ProLiant DL380 Gen10 server. This image displays the server's front, featuring multiple hot-swappable drive bays, typically for SAS/SATA drives, and front panel indicators for power and system status.

• Važiavimo įlankos: Hot-pluggable bays for SAS/SATA hard drives or SSDs.
• Power Button/LED: Controls server power and indicates power status.
• Sveikatos šviesos diodas: Indicates overall system health (green for normal, amber for minor issues, red for critical issues).
• UID Button/LED: Unique Identification button to locate the server in a rack.

4.2 Galinis skydelis

The rear panel contains power supply units, network ports, and other I/O connections.

4.2 paveikslas: Galinis view of the HP ProLiant DL380 Gen10 server. This image shows the back of the server, highlighting the redundant power supply units, various network interface ports, USB ports, and video output.

• Maitinimo šaltiniai (PSU): Redundant, hot-pluggable power supplies.
• Tinklo prievadai: Keli Ethernet prievadai tinklo ryšiui.
• iLO Port: Dedicated port for HP Integrated Lights-Out (iLO) remote management.
• USB prievadai: Periferinių įrenginių prijungimui.
• Vaizdo įrašo prievadas: VGA output for display.
• PCIe išplėtimo lizdai: For adding expansion cards.

4.3 Vidiniai komponentai

Understanding the internal layout is crucial for maintenance and upgrades.

4.3 paveikslas: Vidinis view of the HP ProLiant DL380 Gen10 server. This image provides a top-down view of the server's interior, revealing the dual CPU sockets with heatsinks, numerous DIMM slots for RAM, and the overall motherboard layout.

• Processors (CPUs): Dual Intel Xeon Silver 4110 processors.
• Atmintis (RAM): Multiple DIMM slots for DDR4 registered memory.
• RAID Controller: HP Smart Array P408i-a with 2GB FBWC.
• Ventiliatoriai: Hot-pluggable system fans for cooling.

5. Sąranka

5.1 Rack Installation (Optional)

If using a rack, follow the instructions provided with your rack mounting kit. Ensure proper airflow and cable management.

5.2 Pradiniai ryšiai

1. Connect the power cords from the server's PSUs to grounded power outlets.
2. Connect network cables to the desired Ethernet ports.
3. (Optional) Connect a monitor, keyboard, and mouse to the rear panel ports for local access.
4. Connect the iLO port to your management network.

5.3 Įjungimas ir pradinė konfigūracija

1. Paspauskite maitinimo mygtuką priekiniame skydelyje.
2. Observe the boot process. Access the BIOS/UEFI setup utility (typically by pressing F9 during boot) to configure boot order, date/time, and other system settings.
3. Configure the HP Smart Array P408i-a RAID controller for your storage needs. Refer to the HP Smart Array documentation for detailed instructions on creating logical drives.
4. Install your desired operating system.
5. Configure network settings for the operating system.

6. Serverio valdymas

6.1 Vietinis valdymas

Once the operating system is installed, you can interact with the server directly using a connected monitor, keyboard, and mouse.

6.2 Remote Management (HP iLO 5)

HP Integrated Lights-Out (iLO) 5 provides comprehensive remote management capabilities, allowing you to manage the server from a web browser or command-line interface, even when the operating system is not running.

• Access iLO by entering its IP address in a web naršyklė.
• Use iLO to monitor server health, power cycle the server, access virtual media, and update firmware.
• Refer to the HP iLO 5 documentation for detailed usage instructions.

6.3 Shutting Down the Server

Always perform a graceful shutdown through the operating system to prevent data corruption. If necessary, the power button can be used for a forced shutdown (hold for 4 seconds).

7. Priežiūra

Reguliarus serverio aptarnavimas užtikrina optimalų našumą ir ilgaamžiškumą.

• Firmware atnaujinimai: Regularly check for and apply the latest firmware updates for BIOS/UEFI, iLO, RAID controller, and other components from the HP support websvetainę.
• Komponento keitimas:
  • Kietieji diskai: Hot-swappable drives can be replaced without powering down the server if configured in a RAID array. Follow RAID controller instructions for drive replacement.
  • Atminties moduliai: Power down the server and disconnect power cords before adding or replacing RAM. Observe ESD precautions.
  • Maitinimo šaltiniai: Hot-pluggable PSUs can be replaced individually while the server is running, provided the other PSU is functional.
• Valymas: Reguliariai valykite dulkes nuo ventiliacijos angų ir vidinių komponentų suslėgtu oru. Prieš valydami įsitikinkite, kad serveris yra išjungtas ir atjungtas nuo maitinimo šaltinio.
• Duomenų atsarginė kopija: Implement a regular data backup strategy to protect against data loss.

8. Problemų sprendimas

This section provides solutions to common issues. For more complex problems, consult HP support documentation.

• Serveris neįsijungia:
  • Verify power cords are securely connected to both the server and the power outlet.
  • Check power supply LEDs for status.
  • Įsitikinkite, kad maitinimo lizdas veikia.
• Nėra vaizdo išvesties:
  • Įsitikinkite, kad monitorius prijungtas ir įjungtas.
  • Try connecting to the iLO remote console.
• Operating system not booting:
  • Patikrinkite įkrovos tvarką BIOS/UEFI.
  • Verify RAID array status in the Smart Array controller utility.
• System Health LED is amber/red:
  • Check iLO for detailed error messages and system logs.
  • Common causes include fan failure, memory errors, or drive issues.

9. Specifikacijos

Key technical specifications for the HP ProLiant DL380 Gen10 server:

10. Garantija ir palaikymas

This product is offered as an Amazon Renewed item. It has been professionally inspected and tested to work and look like new.

• „Amazon“ atnaujinta garantija: If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee. Refer to Amazon's Renewed program terms for details.
• Techninė pagalba: Dėl techninės pagalbos kreipkitės į oficialią HP palaikymo tarnybą website for the ProLiant DL380 Gen10 series. You may also contact the seller, TekBoost Certified, for support related to your renewed product.