LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Įvadas

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Saugos informacija

Prieš montuodami ir naudodami atidžiai perskaitykite šias saugos instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras ar kiti pavojai.

• Profesionalus montavimas: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
• Maitinimo atjungimas: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
• ttage: Užtikrinkite tiekimo tūrįtage matches the device's requirements (230 Volt AC).
• Aplinkos sąlygos: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Modifikacija: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• 1x LEDVANCE 360DEG Wall Sensor device

4. Produkto ypatybės

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Sąranka ir diegimas

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

5.1 paveikslas: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

5.2 paveikslas: Iš arti view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Montavimo vieta

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Elektros prijungimas

• ĮSPĖJIMAS: Prieš atlikdami bet kokius elektros prijungimus, atjunkite maitinimą.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Naudojimo instrukcijos

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

6.1 Darbo režimai

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Detection Settings

The sensor allows for adjustment of the light duration after detection:

• Šviesos trukmė: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Priežiūra

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Valymas: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• Patikra: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. Problemų sprendimas

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• Šviesa neįsijungia:
  • Patikrinkite, ar maitinimo šaltinis prijungtas ir aktyvus.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Ensure the detection area is clear of obstructions.
  • Adjust the sensitivity settings if available.
• Šviesa dega nuolat:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Netikėtai užsidega šviesa:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Jei problema išlieka ir išbandžius šiuos sprendimus, kreipkitės į klientų aptarnavimo tarnybą arba kvalifikuotą elektriką.

9. Specifikacijos

10. Garantija ir palaikymas

The LEDVANCE 360DEG Wall Sensor comes with a 3 metų gamintojo garantija nuo įsigijimo datos, apimanti medžiagų ir gamybos defektus įprasto naudojimo sąlygomis.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE prekės ženklo parduotuvė.

Prašome išsaugoti pirkimo įrodymą garantijos tikslais.