Įvadas
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Utilitech Thermoplastic Submersible Utility Pump. Please read this manual thoroughly before use and retain it for future reference.
Svarbi saugos informacija
- Always disconnect power before servicing or cleaning the pump.
- Nenaudokite siurblio su pažeistu laidu ar kištuku.
- Įsitikinkite, kad siurblys yra tinkamai įžemintas.
- Do not use the pump for flammable liquids or in hazardous locations.
- Laikykite vaikus ir naminius gyvūnus atokiau nuo veikiančio siurblio.
- Dirbdami su siurbliu, dėvėkite tinkamas asmenines apsaugos priemones (AAP).
- Šis siurblys skirtas tik vandeniui.
Produktas baigtasview
The Utilitech Thermoplastic Submersible Utility Pump is designed for efficient water removal from various areas. Key features include:
- Medžiaga: Thermoplastic construction for durability.
- Galia: 1/3 HP motor.
- Srauto greitis: 30 GPM (Gallons Per Minute).
- Laido ilgis: 10 ft / 3.04 m cord.
- ttage: 115 voltų.
- Stilius: Submersible design for effective water transfer.
Image 1: The Utilitech Thermoplastic Submersible Utility Pump shown in its retail packaging, highlighting its key features like 1/3 HP, 30 GPM flow rate, and 10 ft cord.
Techninės specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Utilitech |
| Modelis | Thermoplastic Submersible Utility Pump |
| Medžiaga | Termoplastinis |
| Stilius | Povandeninis |
| Maitinimo šaltinis | AC/DC |
| Arklio galios (AG) | 1 / 3 HP |
| Srauto greitis | 30 GPM |
| ttage | 115 voltų |
| Laido ilgis | 10 pėdų / 3.04 m |
| Spalva | Juoda |
| Prekės svoris | 10 svaro |
| Pakuotės matmenys | 11 x 8 x 7 colio |
| UPC | 054757098391 |
Diegimas ir sąranka
Išpakavimas
- Atsargiai išimkite siurblį ir visus priedus iš pakuotės.
- Inspect the pump for any signs of damage. Do not use if damaged.
- Išsaugokite pakuotę būsimam saugojimui ar transportavimui.
Įdėjimas
- Place the pump on a solid, level surface in the area to be drained.
- Ensure the pump is fully submerged in water for optimal operation and cooling.
- Avoid placing the pump directly on mud, sand, or debris to prevent clogging.
Jungtys
- Attach a suitable discharge hose (not included) to the pump's outlet. Ensure a secure, leak-free connection.
- Position the discharge hose to direct water away from the area being drained and towards a suitable disposal point.
- Plug the pump into a properly grounded 115-volt AC outlet.
Operating Your Pump
Siurblio paleidimas
- Ensure the pump is correctly installed and submerged.
- Plug the power cord into a grounded electrical outlet. The pump will begin operating immediately.
Siurblio sustabdymas
- Unplug the power cord from the electrical outlet to stop the pump.
- Do not allow the pump to run dry for extended periods, as this can cause damage.
Nepertraukiamas veikimas
- Monitor the pump during operation to ensure it is functioning correctly and not running dry.
- If the pump stops pumping water, unplug it immediately and check for blockages or low water levels.
Priežiūra
Reguliarus valymas
- Disconnect power before any maintenance.
- Periodically inspect the pump intake screen for debris. Clean any accumulated dirt, leaves, or other foreign objects.
- Rinse the pump with clean water after use, especially if pumping dirty water.
Sandėliavimas
- For long-term storage, clean the pump thoroughly and allow it to dry completely.
- Siurblį laikykite sausoje, nuo šalčio apsaugotoje vietoje.
- Do not store the pump with water inside if there is a risk of freezing.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Siurblys neįsijungia | Nėra galios | Check power outlet, circuit breaker, and cord connection. |
| Siurblys neįsijungia | Užstrigo sparnuotė | Disconnect power, inspect intake for debris, and clear any obstructions. |
| Siurblys veikia, bet nėra vandens | Žemas vandens lygis | Įsitikinkite, kad siurblys yra visiškai panardintas. |
| Siurblys veikia, bet nėra vandens | Clogged intake/discharge | Disconnect power, clear intake screen and discharge hose. |
| Sumažėjęs srautas | Dalinis užsikimšimas | Disconnect power, clean intake screen and check hose for kinks. |
| Siurblys dažnai įsijungia / išsijungia | Water level fluctuation | Ensure stable water level or adjust pump placement. |
Garantija ir klientų aptarnavimas
Informacija apie garantiją
This Utilitech pump comes with a 1-year limited warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase.
Pagalba klientams
For technical assistance, replacement parts, or warranty claims, please contact Utilitech customer support. Refer to the product packaging or the official Utilitech websvetainė, kurioje pateikiama naujausia kontaktinė informacija.
You can also visit the official Utilitech webSvetainė, kurioje rasite papildomų išteklių: www.utilitech.com
