Dlyfull UT4 Universal 4-Slot Battery Charger Instruction Manual

1. Įvadas

The Dlyfull UT4 is a versatile 4-slot battery charger designed to accommodate a wide range of rechargeable battery types, including Li-ion, IMR, INR, ICR, Ni-MH, Ni-Cd, and LiFePO4. It features multiple operating modes such as Charge, Discharge, Refresh, and Test, along with a USB power bank function. This manual provides detailed instructions for safe and efficient use of your Dlyfull UT4 charger.

2. Saugos priemonės

• Use the charger only with compatible battery types as specified in this manual. Attempting to charge incompatible batteries may result in damage or injury.
• Įkroviklio negalima ardyti, modifikuoti ir sukelti trumpojo jungimo.
• Saugokite įkroviklį nuo vandens, didelės drėgmės ar ekstremalių temperatūrų.
• Saugokite įkroviklį nuo vaikų ir naminių gyvūnėlių.
• Darbo metu užtikrinkite tinkamą vėdinimą, kad išvengtumėte perkaitimo.
• Disconnect the power supply when the charger is not in use or during cleaning.
• If any unusual behavior or damage is observed, discontinue use immediately and contact support.
• Pastaba: Batteries are not included with this product.

3. Produktas baigtasview

3.1 Komponentai

The Dlyfull UT4 charger features four independent charging slots, an LCD display, and two control buttons.

Vaizdas: priekis view of the Dlyfull UT4 charger, showing the LCD screen, four battery slots, and two control buttons (MODE and SLOT).

3.2 Pagrindinės savybės

• Visuotinis suderinamumas: Supports 3.7V Li-ion, 3.2V LiFePO4, IMR, INR, ICR, and 1.2V Ni-MH/Ni-Cd batteries.
• Keli veikimo režimai: Charge, Discharge, Refresh, and Test.
• Išmanusis LCD ekranas: A high-resolution LCD screen displays current operating mode, battery type, voltage (V), current (A), capacity (mAh), temperature (°C), and time (h), providing comprehensive status information.
• Greitas įkrovimas: The charger utilizes adaptive current technology, automatically adjusting the charging current up to 2A. A 2000mAh battery can be fully charged in approximately 1 hour. Input: USB Type-C 5V/2A.
• USB maitinimo bloko funkcija: Use a Li-ion battery in slot 1 to charge external devices via the USB output (5V/2A).
• Saugos apsaugos: The charger incorporates overcharge, overcurrent, overvoltage, temperatūros valdymas ir apsauga nuo trumpojo jungimo.
• C tipo USB įvestis: 5V/2A input for power supply.

Image: The Dlyfull UT4 charger with icons representing its safety features: overcharge protection, overcurrent protection, overvoltage protection, temperature control, and short-circuit protection.

4. Sąranka

1. Prijunkite maitinimą: Connect the USB Type-C cable to the charger's input port and the other end to a 5V/2A USB power adapter (not included), PC, car charger, or power bank.


Image: The Dlyfull UT4 charger with its USB-C input port, illustrating connection to a USB adapter, PC, car charger, solar panel, or power bank.

2. Įdėkite baterijas: Carefully insert up to four compatible rechargeable batteries into the charging slots. Ensure correct polarity (+/-). The charger will automatically detect Ni-MH/Ni-Cd/Li-Ion batteries. For LiFePO4 batteries, manual selection is required (see Operating Modes).

5. Veikimo režimai

The Dlyfull UT4 offers four primary operating modes: Charge, Discharge, Refresh, and Test. Use the REŽIMAS ir SLOT buttons to navigate and select functions.

Image: The Dlyfull UT4 charger's LCD screen displaying the available modes (Charge, Discharge, Refresh, Test) and battery slot indicators, with labels for battery type, voltage, capacity, temperature, current, and time.

5.1 Režimo pasirinkimas

1. After inserting a battery, the charger will display information for that slot.
2. Paspauskite SLOT button to select the desired battery slot (1, 2, 3, or 4).
3. Paspauskite REŽIMAS button to cycle through the available operating modes: Charge, Discharge, Refresh, Test.
4. Once the desired mode is selected, the operation will begin automatically after a few seconds of inactivity, or you can press the REŽIMAS mygtuką dar kartą, kad patvirtintumėte.
5. For LiFePO4 batteries, after inserting, press the REŽIMAS button to manually select "LiFePO4" as the battery type.

Image: A close-up showing fingers interacting with the 'MODE' and 'SLOT' touch buttons on the Dlyfull UT4 charger's interface.

5.2 Mode Descriptions

• Mokestis: Standard charging function. The charger will automatically detect the battery type (except LiFePO4) and apply an adaptive charging current.
• Iškrovimas: Discharges the battery to eliminate memory effect, particularly useful for Ni-Cd batteries.
• Atnaujinti: Cycles the battery through discharge and charge cycles to restore its maximum capacity, often used for older batteries.
• Testas: Measures and displays the actual capacity of the battery by fully discharging and then fully charging it. This process can take several hours.

5.3 Išorinės baterijos funkcija

The Dlyfull UT4 can function as a power bank to charge external devices. This function is available when a Li-ion battery is inserted into 1 lizdas.

1. Ensure a charged Li-ion battery is in Slot 1.
2. Disconnect the charger from its main power input (USB-C).
3. Connect your external device (e.g., smartphone, MP3 player, tablet) to the USB-A output port on the charger.
4. The charger will begin supplying 5V/2A power to your device.

Image: The Dlyfull UT4 charger with a Li-ion battery in slot 1, connected via its USB-A output to a smartphone, demonstrating its power bank capability.

6. Suderinamos baterijos

The Dlyfull UT4 charger supports a wide range of battery sizes and chemistries:

• 3.7V Li-ion / IMR / INR / ICR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123A), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 32650.
• 3.2V LiFePO4: (Same sizes as Li-ion, manual selection required).
• 1.2V Ni-MH / Ni-Cd: A, AA, AAA, AAAA, C, SC, D.

Image: A visual representation of the Dlyfull UT4 charger's compatibility with various battery types, including 1.2V Ni-MH/Ni-Cd and 3.6V/3.7V Li-ion, and 3.2V LiFePO4 batteries, listing common sizes.

7. LCD ekrano informacija

The intelligent LCD screen provides comprehensive real-time data:

• Režimas: Indicates the current operating mode (Charge, Discharge, Refresh, Test).
• Baterijos tipas: Displays detected or selected battery chemistry (Li-ion, LiFePO4, Ni-MH/Ni-Cd).
• ttage (V): Esamas akumuliatoriaus tūristage.
• Srovė (A): Current charging or discharging amppakilimas.
• Talpa (mAh): Accumulated capacity during charge/discharge or tested capacity.
• Temperatūra (°C): Internal temperature of the charger or battery.
• Laikas (val.): Praėjęs dabartinės operacijos laikas.
• Lizdo numeris: Indicates which battery slot's information is currently displayed.

8. Priežiūra

• Įkroviklį reguliariai valykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Keep the charging slots free from dust and debris to ensure proper contact.
• Nenaudojamą įkroviklį laikykite vėsioje, sausoje vietoje.
• Venkite įkroviklio numetimo ar stiprių smūgių.

9. Problemų sprendimas

10. Specifikacijos

• Įvestis: C tipo USB 5V/2A
• Output (Charging): Adaptive current (up to 2A per slot, automatically adjusted)
• Output (USB Power Bank): 5V/2A (from Slot 1 with Li-ion battery)
• Suderinami baterijų tipai:
  • 3.7V Li-ion / IMR / INR / ICR (e.g., 18650, 21700, 26650)
  • 3.2V LiFePO4 (manual selection required)
  • 1.2V Ni-MH / Ni-Cd (e.g., AA, AAA, C, D)
• Veikimo režimai: Įkrovimas, iškrovimas, atnaujinimas, bandymas
• Ekranas: LCD su foniniu apšvietimu
• Svoris: 279.99 gramų
• UPC: 742354393468

11. Garantija ir palaikymas

For warranty information and technical support, please refer to the official Dlyfull websvetainėje arba susisiekite su pardavėju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Manufacturer: Dlyfull