„Pyramid Plastics“ „Kawasaki Ninja 250R Hugger“ montavimo ir priežiūros vadovas

1. Įvadas

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Pyramid Plastics Rear Hugger for the Kawasaki Ninja 250R (2008-2013 models). This product is designed to protect the rear shock absorber, undertray, and other components from road debris, water spray, and dirt, enhancing the longevity and cleanliness of your motorcycle.

Please read this manual thoroughly before beginning installation to ensure correct fitting and to prevent damage to the product or your motorcycle. Keep this manual for future reference.

2. Saugos informacija

Montavimo ir priežiūros metu visada laikykitės šių saugos priemonių:

• Prieš pradėdami bet kokius darbus, įsitikinkite, kad motociklas yra stabilus ir saugiai pastatytas ant stovo.
• Allow the engine and exhaust system to cool down completely before touching any components to avoid burns.
• Dėvėkite tinkamas asmenines apsaugos priemones, įskaitant pirštines ir akių apsaugą.
• Use the correct tools for each step to prevent damage to fasteners or components.
• Jei abejojate dėl kurio nors žingsnio, pasikonsultuokite su kvalifikuotu motociklų mechaniku.
• Do not modify the product or motorcycle components in any way not described in this manual.
• Keep all small parts and tools away from children and pets.

3. Pakuotės turinys

Before installation, verify that all components are present and undamaged. If any parts are missing or damaged, contact your supplier immediately.

• 1x Pyramid Plastics Rear Hugger (Model 07301B)
• 1x Fitting Kit (includes bolts, washers, spacers, and any necessary brackets)
• 1x Installation Instructions (this manual)

Image 3.1: Main component of the Pyramid Plastics Rear Hugger, Gloss Black finish.

4. Diegimo vadovas

This section outlines the steps required to install the Pyramid Plastics Rear Hugger on your Kawasaki Ninja 250R. Ensure you have all necessary tools before starting.

Reikalingi įrankiai:

• Lizdinių veržliarakčių rinkinys
• Šešiakampių raktų rinkinys (Allen raktai)
• Sukimo momento raktas (rekomenduojamas)
• Švarus audinys
• Motociklų stovas

Diegimo žingsniai:

1. Paruoškite motociklą: Place your Kawasaki Ninja 250R on a suitable stand to lift the rear wheel off the ground. Ensure the motorcycle is stable. Allow the exhaust to cool.
2. Tvirtinimo taškų nustatymas: Identify the existing mounting points on the swingarm or chain guard area where the hugger will attach. These typically involve existing bolt holes.
3. Išvalykite plotą: Thoroughly clean the swingarm, chain guard, and surrounding areas to remove any dirt, grease, or debris. This ensures a clean fit and prevents contamination.
4. Padėkite apkabintoją: Carefully position the Pyramid Plastics hugger against the swingarm, aligning its mounting holes with the motorcycle's attachment points.
5. Įdiekite tvirtinimo detales: Using the provided fitting kit, insert the bolts with appropriate washers and spacers through the hugger's mounting holes and into the motorcycle's attachment points. Do not fully tighten yet.
6. Sureguliuokite ir sulygiuokite: Gently adjust the hugger to ensure it is centered and has adequate clearance from the tire, chain, and any moving parts. Ensure there is no contact with the tire at full suspension compression.
7. Priveržkite tvirtinimo detales: Once properly aligned, progressively tighten all fasteners. Refer to your motorcycle's service manual for specific torque specifications for the mounting points, if available. Do not overtighten.
8. Galutinis patikrinimas: After tightening, visually inspect the hugger for secure attachment, proper alignment, and sufficient clearance. Rotate the rear wheel manually to confirm no rubbing or interference.

4.1 pav.: pvz.ample of a rear hugger properly installed, showing clearance around the tire and chain.

5. Priežiūra

Regular maintenance of your Pyramid Plastics Rear Hugger will ensure its longevity and continued performance.

• Valymas: Clean the hugger regularly with mild soap and water, using a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Patikra: Periodically check all mounting bolts for tightness. Vibrations from riding can sometimes loosen fasteners. Inspect the hugger for any signs of cracks, damage, or excessive wear.
• Clearance Check: Ensure the hugger maintains adequate clearance from the tire and chain, especially after long rides or if the suspension has been adjusted.
• Žala: If the hugger sustains significant damage, consider replacing it to maintain optimal protection and aesthetic appeal.

6. Problemų sprendimas

Štai keletas dažniausiai pasitaikančių problemų ir galimų jų sprendimų:

7. Specifikacijos

• Produkto pavadinimas: Pyramid Plastics Rear Hugger
• Modelio numeris: 07301B
• Suderinamumas: Kawasaki Ninja 250R (Years: 2008-2013)
• Medžiaga: Aukštos kokybės ABS plastikas
• Baigti: Blizgus juodas
• Prekės svoris: Approximately 2.5 kg (as per product data)
• Gamintojas: Piramidės plastikas

8. Garantija ir palaikymas

Pyramid Plastics products are manufactured to high standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Pyramid Plastics website. In case of any issues or for technical support, please contact your retailer or Pyramid Plastics customer service directly.

Kontaktinė informacija:

• Websvetainė: www.pyramidplastics.co.uk (pvzampnuoroda, tikroji nuoroda gali skirtis)
• El. paštas: support@pyramidplastics.co.uk (examppaštu)