Įvadas
The Kidde Model i12060A is a hardwired ionization smoke alarm designed for residential use. It operates on a 120V AC power source and includes a 9V battery backup to ensure continuous operation during power outages. This alarm utilizes ionization sensing technology to detect invisible fire particles, commonly associated with fast-flaming fires. For comprehensive fire safety, Kidde recommends installing both ionization and photoelectric smoke alarms.
Pagrindinės savybės
- Jonizacijos jutimo technologija: Detects invisible fire particles from fast-flaming fires.
- 85 Decibel Alarm: Provides a loud alert in the event of smoke detection.
- Baterijos atsarginė kopija: Equipped with a 9V battery (included) for operation during power failures.
- Front-Load Battery Door: Allows for easy battery replacement without removing the alarm from its mounting bracket.
- Bandymo-nutildymo mygtukas: Simplifies testing the alarm and silencing nuisance alarms.
- Sujungiamas: Can be interconnected with up to 24 compatible Kidde devices (including smoke, CO, and heat alarms) for whole-home protection.
- LED indikatoriai: Red LED indicates alarm modes (Standby, Alarm, Alarm Memory, Hush); Green LED indicates AC power.
- UL sertifikuota: Meets safety standards of UL217, NFPA72, NFPA 101, CA Fire Marshal, FHA, & HUD.
Figure 1: Diagram illustrating key features of the Kidde Smoke Detector, including front-loading battery door, 9V battery backup, ionization sensor, easy installation, interconnectability, and test/hush button.
Sąranka ir diegimas
The Kidde i12060A smoke alarm is designed for easy installation. It requires a 120V AC power source. The unit comes with a pre-stripped wiring harness and an easy-off cap for simplified wiring. Ensure power is off at the circuit breaker before beginning installation.
- Montavimo kronšteino montavimas: Secure the mounting bracket to the ceiling or wall using the provided screws. The bracket typically requires two screws.
- Laidų prijungimas: Connect the alarm's wiring harness to your household electrical wiring. Follow local electrical codes and the wiring diagram provided in the full user manual. The unit features push-pin connectors for easy attachment.
- Baterijos įdėjimas: Insert the included 9V battery into the front-load battery compartment. Ensure correct polarity.
- Pritvirtinkite signalizaciją prie laikiklio: Align the smoke alarm with the mounting bracket and twist clockwise until it locks securely into place.
- Įjunkite ir patikrinkite: Restore power at the circuit breaker. The green LED should illuminate, indicating AC power. Press and hold the Test/Hush button to confirm the alarm sounds.
2 pav.: galinis view of the Kidde Smoke Detector, showing the mounting points and wiring connection area. Note the "DATE OF INSTALL" label for tracking.
Figure 3: Diagram showing the dimensions of the Kidde Hardwired 120V AC/DC Alarm, which is 5 inches in diameter and 1.75 inches in depth.
Figure 4: Home Safety Product Placement Guide illustrating recommended locations for smoke alarms, carbon monoxide alarms, fire extinguishers, and escape ladders within a typical home layout.
Naudojimo instrukcijos
The Kidde i12060A smoke alarm features simple operation with clear visual indicators.
- Budėjimo režimas: The red LED flashes approximately every 40 seconds, indicating the alarm is operating correctly. The green LED remains steadily lit when AC power is present.
- Aliarmo režimas: When smoke is detected, the alarm will sound a loud, continuous siren, and the red LED will flash rapidly.
- Signalizacijos atmintis: If the alarm has been activated and then silenced, the red LED will flash rapidly for a period to indicate that an alarm condition occurred.
- Hush Mode: To silence a nuisance alarm (e.g., from cooking smoke), press the Test/Hush button. The alarm will be silenced for approximately 7 minutes. The red LED will flash every 10 seconds during Hush mode.
- Signalizacijos testavimas: Press and hold the Test/Hush button until the alarm sounds. This should be done weekly to ensure proper function.
5 pav.: priekis view of the Kidde Smoke Detector showing the green LED illuminated, indicating that the unit is receiving AC power.
Priežiūra
- Baterijos keitimas: The 9V battery should be replaced at least once a year, or immediately if the alarm chirps to indicate a low battery. The front-load battery door makes this process simple.
- Valymas: Clean the smoke alarm regularly (at least once a month) to remove dust and debris that can interfere with its operation. Use a soft brush attachment on your vacuum cleaner to clean around the vents. Do not paint the alarm.
- Gyvenimo pabaiga: This smoke alarm has a 10-year limited warranty. It is recommended to replace the alarm after 10 years from the date of installation, regardless of whether it appears to be functioning.
6 pav.: priekis view of the Kidde Smoke Detector with the front-load battery door open, revealing the 9V battery compartment for easy access and replacement.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Signalizacija periodiškai čirškia. | Senka baterija. | Pakeiskite 9 V akumuliatorių. |
| Signalizacija suveikia be matomų dūmų. | Nuisance alarm (e.g., cooking smoke, high humidity), dust accumulation. | Press the Test/Hush button to silence. Clean the alarm. Ensure proper placement away from cooking areas or high humidity. |
| Žalias šviesos diodas nedega. | Nėra kintamosios srovės. | Patikrinkite grandinės pertraukiklį ir laidų jungtis. |
| Bandymo metu aliarmas neskamba. | No power, faulty unit, or dead battery. | Check AC power and battery. If issues persist, replace the unit. |
Dėl išsamesnės trikčių šalinimo žr. oficialų Trikčių šalinimo vadovas (PDF).
Specifikacijos
- Prekinis ženklas: Kidde
- Modelis: i12060A
- Maitinimo šaltinis: Hardwired (120 Volts AC) with 9V Battery Backup
- Jutiklio tipas: Jonizacija
- Signalizacijos tipas: Fire Safety, Ionization, Wired, Interconnected, Tampatsparus
- Gaminio matmenys: 1.75 "D x 5" P x 5" A
- Prekės svoris: 8 uncijos
- Spalva: Baltas
- Darbinė drėgmė: Santykinė oro drėgmė nuo 5 % iki 95 %, nesikondensuojanti
- Viršutinės temperatūros įvertinimas: 100 laipsnių pagal Farenheitą
- Suderinami įrenginiai: Iki 24 „Kidde“ įrenginių
- Sertifikavimas: UL217, NFPA72, NFPA 101 (1 & 2 Family), CA Fire Marshall, FHA, HUD
- Įtraukti komponentai: Smoke Alarm, 9V Battery
- UPC: 047871297306
- Dalies numeris: 21029730
- Pirmą kartą pasiekiama data: 4 m. balandžio 2020 d
Informacija apie garantiją
The Kidde i12060A Smoke Detector comes with a 5-year limited warranty. This warranty period begins when the alarm is powered on. If the power-on date is unknown, it should be assumed that the alarm needs to be replaced after 10 years from the manufacturing date (typically found on the back of the unit).
Pagalba ir papildomi ištekliai
For complete operating instructions, detailed installation diagrams, and further information, please refer to the official documents:
Taip pat galite apsilankyti oficialiame „Kidde“ parduotuvė „Amazon“ platformoje daugiau produktų ir informacijos.
