KLEIN TOOLS IR1

Infraraudonųjų spindulių termometro KLEIN TOOLS IR1 naudojimo instrukcija

Modelis: IR1

Įvadas

The KLEIN TOOLS IR1 is an infrared thermometer with a targeting laser. It has a wide measurement range of -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius) and a 10:1 distance-to-spot ratio. The backlit display provides clear readings. This manual provides essential information for the safe and effective use of your IR1 thermometer.

KLEIN TOOLS IR1 infraraudonųjų spindulių termometras

Image: The KLEIN TOOLS IR1 Infrared Thermometer, a non-contact temperature measurement device.

Saugos informacija

ĮSPĖJIMAS:

  • Šis įrenginys yra NE a medical device. Do not use on people or animals.
  • Do not point the laser directly into eyes or at reflective surfaces.
  • Always follow local safety regulations when using testing equipment.

Produkto savybės

KLEIN TOOLS IR1 Infrared Thermometer with labeled parts

Image: Diagram of the KLEIN TOOLS IR1 Infrared Thermometer highlighting its key components: Targeting Laser, IR Temperature Sensor, Trigger, Battery Compartment, and LCD Display.

  • Targeting Laser: For precise aiming at the measurement target.
  • IR Temperature Sensor: Detects infrared energy to measure surface temperature.
  • Suaktyvinimas: Activates the measurement and laser.
  • LCD ekranas: Backlit display for clear temperature readings.
  • Baterijų skyrius: Located in the handle for easy battery access.
KLEIN TOOLS IR1 Infrared Thermometer features list

Image: A visual summary of the IR1's features, including 10:1 distance-to-spot ratio, targeting laser, data hold, backlit display, low battery indicator, and auto power-off.

  • Optinė skiriamoji geba: 10:1 distance-to-spot ratio for accurate readings from a distance.
  • Temperatūros diapazonas: Matuoja nuo -20 °C iki 400 °C (-4 °F iki 752 °F).
  • Fixed Emissivity: A fixed emissivity value of 0.95 provides consistent readings across various surfaces.
  • Automatinis išjungimas: Taupo baterijos veikimo laiką automatiškai išsijungdamas po neveiklumo laikotarpio.
  • Patvarumas: 6.6 ft. (2 m) drop protection.

Sąranka

Akumuliatoriaus montavimas

  1. Locate the Phillips head screw on the handle of the thermometer.
  2. Atsukite ir nuimkite akumuliatoriaus skyriaus dangtį.
  3. Įdėkite pridedamą 9 V bateriją, užtikrindami teisingą poliškumą.
  4. Uždėkite akumuliatoriaus skyriaus dangtelį ir pritvirtinkite jį varžtu.

Naudojimo instrukcijos

Atliekant matavimą

  1. Point the IR1 thermometer at the target surface.
  2. Paspauskite ir palaikykite nuspaudę gaiduką, kad suaktyvintumėte lazerį ir pradėtumėte matavimą. Lazerio taškas rodo matavimo srities centrą.
  3. The temperature reading will appear on the backlit LCD display.
  4. Release the trigger to hold the last measured temperature on the display. The device will automatically power off after a short period of inactivity to conserve battery.

Understanding Distance-to-Spot Ratio (D:S)

The IR1 has a 10:1 distance-to-spot ratio. This means that at a distance of 10 inches, the measurement spot size will be 1 inch. To ensure accurate readings, position the thermometer at an appropriate distance from the target, considering the size of the area you wish to measure.

Temperatūros vieneto pasirinkimas

The IR1 can display temperatures in Fahrenheit (°F) or Celsius (°C). Refer to the small switch or button located near the battery compartment (or as indicated in the detailed manual) to toggle between these units.

KLEIN TOOLS IR1 measuring temperature on an electrical panel

Image: The IR1 thermometer in use, measuring the temperature of components within an electrical panel, with the laser targeting a specific point.

KLEIN TOOLS IR1 measuring temperature of an HVAC vent

Image: The IR1 thermometer being used to measure the temperature of an HVAC vent, demonstrating its application in environmental diagnostics.

Priežiūra

Valymas

To clean the thermometer, wipe it with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the lens of the IR sensor is kept clean for accurate readings.

Baterijos keitimas

When the low battery indicator appears on the display, replace the 9V battery as described in the "Battery Installation" section.

Trikčių šalinimas

If the device does not power on or provides inconsistent readings, ensure the battery is correctly installed and has sufficient charge. For further issues, consult the official KLEIN TOOLS support resources.

Specifikacijos

FunkcijaDetalė
Modelio numeris1 IR
Temperatūros diapazonas-4°F iki 752°F (nuo -20°C iki 400°C)
Optical Resolution (D:S)10:1
SpinduliuotėIštaisyta (0.95)
Ekrano tipasApšviestas skaitmeninis
Maitinimo šaltinis1 x 9 V baterija (pridedama)
Apsauga nuo kritimo6.6 pėdos (2 m)
Matmenys6.01 x 4.14 x 1.73 colio
Svoris7.83 uncijos
Išorinė medžiagaPlastikiniai
Ryšio technologijaInfraraudonųjų spindulių

Garantija ir palaikymas

KLEIN TOOLS products are known for their quality and durability. For specific warranty information and customer support, please refer to the official KLEIN TOOLS websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą garantiniams reikalavimams.

Oficiali prekės ženklo parduotuvė: KLEIN ĮRANKIŲ PARDUOTUVĖ

Susiję dokumentai - 1 IR

Preview „Klein Tools IR1“ infraraudonųjų spindulių termometro naudojimo instrukcija
„Klein Tools IR1“ infraraudonųjų spindulių termometro naudojimo instrukcija, kurioje išsamiai aprašytos jo savybės, specifikacijos, naudojimo instrukcijos, priežiūra ir saugos įspėjimai.
Preview „Klein Tools IR5“ dviejų lazerių infraraudonųjų spindulių termometro naudojimo instrukcija
Oficiali „Klein Tools IR5“ dviejų lazerių infraraudonųjų spindulių termometro naudojimo instrukcija. Pateikiama išsami informacija apie funkcijas, specifikacijas, naudojimo procedūras, priežiūrą ir saugos įspėjimus profesionaliam naudojimui.
Preview Klein Tools IR07 Dual IR/Probe Thermometer: User Manual and Specifications
Comprehensive instructions, features, specifications, and safety guidelines for the Klein Tools IR07 Dual IR/Probe Thermometer, including infrared and probe temperature measurements.
Preview „Klein Tools“ patikros rinkinys: infraraudonųjų spindulių termometras ir GFCI lizdų testeris
Išsami „Klein Tools IR1“ infraraudonųjų spindulių termometro ir RT210 GFCI lizdų testerio naudojimo instrukcija. Aptariamos abiejų prietaisų funkcijos, specifikacijos, naudojimo instrukcijos, saugos gairės, priežiūra ir trikčių šalinimas.
Preview Klein Tools NCVT-4IR Non-Contact Voltage testeris su lazeriniu infraraudonųjų spindulių termometru – instrukcijos ir specifikacijos
Oficialios „Klein Tools NCVT-4IR“, bekontakčio tūrio matuoklio, instrukcijos ir specifikacijostagElektroninis testeris su įmontuotu lazeriniu infraraudonųjų spindulių termometru. Sužinokite apie jo funkcijas, veikimą, saugos įspėjimus ir priežiūrą.
Preview Klein Tools NCVT-4IR Non-Contact Voltage testeris su lazeriniu infraraudonųjų spindulių termometru – naudotojo vadovas
Išsamios instrukcijos ir specifikacijos, skirtos „Klein Tools NCVT-4IR“, bekontakčiam tūrio matuokliuitagElektroninis testeris su įmontuotu lazeriniu infraraudonųjų spindulių termometru. Sužinokite apie jo funkcijas, veikimą, saugos įspėjimus ir priežiūrą.