Lume Cube Bicolor Panel Mini LED Light Instruction Manual

Įvadas

This manual provides detailed instructions for the safe and effective use of your Lume Cube Bicolor Panel Mini LED Light. Please read this manual thoroughly before operating the device and retain it for future reference.

Produktas baigtasview

Figure 1: Lume Cube Bicolor Panel Mini LED Light with included accessories.

Pagrindinės savybės

• Kišeninio dydžio dizainas: Compact and portable (3.6" x 2.2" x 0.43") with durable aluminum construction.
• Reguliuojamas ryškumas: 300 lumen panel, adjustable from 1% to 100%.
• Reguliuojama spalvos temperatūra: Flicker-free LED light with color temperature adjustable from 3200K (warm) to 5600K (cool).
• Ilgas baterijos veikimo laikas: Up to 14 hours of operation on a single charge. Rechargeable via USB-C.
• Intelligent LCD Screen: Displays light settings, battery levels, and estimated run time.
• Universalus montavimas: Compatible with professional DSLR cameras and other mounting options using the included shoe mount.

Kas yra dėžutėje

• 1 x Lume Cube Panel Mini LED Light
• 1 x Softening Silicone Diffuser
• 1 x DSLR Mini Shoe Mount
• 1x USB įkrovimo laidas

Sąranka

1. Įrenginio įkrovimas

Before first use, fully charge your Lume Cube Panel Mini. Connect the included USB-C charging cable to the USB-C port on the side of the light and plug the other end into a compatible USB power source. The LCD screen will indicate charging status.

2. Attaching the Shoe Mount

To mount the light onto a camera or tripod, screw the DSLR Mini Shoe Mount into one of the 1/4"-20 screw threads located on the bottom or side of the Lume Cube Panel Mini. Securely tighten the mount. Then, slide the shoe mount into your camera's hot shoe or a compatible tripod mount.

Figure 2: Lume Cube Panel Mini attached to a DSLR camera via the shoe mount.

3. Applying the Softening Diffuser

For softer, more even light output, slide the Softening Silicone Diffuser over the LED panel. Ensure it fits snugly around the edges of the light.

Figure 3: Lume Cube Panel Mini with the softening silicone diffuser in place.

Demonstracinio vaizdo įrašo sąranka

Naudojimo instrukcijos

1. Maitinimo įjungimas/išjungimas

Press and hold the power button (usually located on the side or back) for approximately 2 seconds to turn the light on or off. The LCD screen will illuminate upon power-on.

2. Ryškumo reguliavimas

Use the adjustment wheel or dedicated buttons (often marked with '+' and '-') to increase or decrease the light's brightness from 1% to 100%. The LCD screen will display the current brightness percentage.

3. Spalvų temperatūros reguliavimas

To change the color temperature, press the mode button (often labeled 'M' or with a similar icon) to switch to color temperature adjustment mode. Then, use the adjustment wheel or '+' and '-' buttons to select a temperature between 3200K (warm) and 5600K (cool). The LCD screen will show the selected Kelvin value.

Figure 4: Visual representation of adjustable color and brightness controls.

4. LCD ekrano supratimas

The built-in LCD screen provides real-time information:

• Baterijos veikimo laikas: Indicated by a battery icon and estimated remaining runtime in hours/minutes.
• Ryškumas: Rodoma kaip proctage (pvz., 50%).
• Spalvos temperatūra: Displayed in Kelvin (e.g., 4500K).

Figure 5: The intuitive LCD screen provides essential operational data.

Priežiūra

• Valymas: Use a soft, dry cloth to clean the exterior of the light. Avoid abrasive cleaners or solvents.
• Akumuliatoriaus priežiūra: To prolong battery life, avoid fully discharging the device frequently. Charge the device regularly, even if not in use, to maintain battery health.
• Saugykla: Store the Lume Cube Panel Mini in a cool, dry place away from direct sunlight and extreme temperatures.
• Diffuser Care: The silicone diffuser can be washed with water if it becomes dirty, restoring its stickiness and effectiveness.

Trikčių šalinimas

• Šviesa neįsijungia: Ensure the device is charged. Press and hold the power button for 2 seconds.
• Baterija nekraunama: Check the USB-C cable and power source. Try a different cable or adapter.
• Nevienodas ryškumas / spalva: Ensure the controls are not accidentally being adjusted. If issues persist, try resetting the device by fully discharging and then recharging.
• Light output too harsh: Ensure the Softening Silicone Diffuser is correctly attached.

Specifikacijos

Garantija ir palaikymas

For warranty information, product registration, or technical support, please visit the official LUME CUBE websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą, jei prireiktų garantijos.

Official LUME CUBE Websvetainė: www.lumecube.com